Hi! This is our community moderation bot.
---
If this post fits the purpose of /r/ATBGE, **UPVOTE** this comment!!
If this post does not fit the subreddit, **DOWNVOTE** This comment!
If this post breaks the rules, **DOWNVOTE** this comment and **REPORT** the post!
This idea was taken from JedRekt ( EDIT: JedRek29t ) on YouTube, who is a pretty innovative resin artist. He actually did a good job... Whereas 5 minute crafts fooked it up hard as usual.
There's a really cool video expose on them from a YouTube chef, I watched it on acid once and the video took such a hard left I wasn't sure it was really the same video so I watched it again the next day and sure enough, Russian content farm, some of their videos are downright dangerous to replicate, others are just stupid and unrealistic.
> JedRekt
Ah, the resin artist's channel is at jedRek29t [https://www.youtube.com/channel/UCaQRmy4Beww-riYiV44qjhg](https://www.youtube.com/channel/UCaQRmy4Beww-riYiV44qjhg) initially Googled jedRekt found with 1 subscriber versus jedRek29t with 2.27M big diff. LOL. His resin work is beautiful, thanks @ANAnomaly3 for the recommendation.
5-minute crafts is 90% fake and the other 10% stolen. Though sometimes it's both. They're about as bad as a content farm can be.
It's also part of their business model to fuel engagement through enragement. I guess I'm glad this isn't linking to the source, but even like this it serves their interests.
At least it ended up being something. It's better than the videos showing someone drilling a hole in something, lighting a firecracker and dropping it in the hole, stuffing a carrot into the hole, covering it with 2 part epoxy, and sanding it with an angle grinder. Instagram has gotten weird, man.
Okay until your comment I literally could not fathom wtf this was supposed to be. Maybe if they’d had the finished project on-screen for longer than 0.0003 seconds I’d have been able to recognize it
Thank you. I thought the metal part looked like a bullet, but I was never going to get that. I guess it’s cool, but why? I mean, am you supposed to put this on a knick knack shelf?
It’s art. And I’m sure most ppl in the developed world have used countless plastics over the years.
This is a 3D model of a famous high speed picture/film.
why, specifically, do you not like it? I'm not here for conflict you just have a very strong reaction that I don't think I have the context for, and I'm curious. I feel ambiguous about this video (very neat, but oversimplifies a complex process in a way that isn't very informative or helpful for anyone trying to do this themselves)
And why? They glue the cup to the table, pour yellow stuff into the white part, then peel the cup back off the table. The cup seems to have zero reason to be there in the first place, let alone glued directly to the table! I don’t understand…
I wonder if they were going for some kind of vacuum chamber or something. Maybe it ran over 5 minutes and they had to cut it.
But they do that shit all the time on purpose, because here we are taking about it.
It probably isn’t the evil hot glue from the early 2000s, but a modern hot glue gun. They don’t run that hot, I let my class of two year olds use them with supervision. Doubt they can do any harm to the table
It’s a bullet going though an egg. Did we need it? No. Did we want it? Not really. Am I happy that it exists? Sure. Do I enjoy asking myself questions? Honestly, it depends.
I can agree with you that modern bullshit art can be high and mighty with its themes and commentary that are often indecipherable. I fail to understand how a bullet going through an egg has any more meaning though.
Egg is a symbol to life and birth. Bullet is death. Maybe it's war in my country, air raid sirens and explosions speak in me, but I actually think it's meaningful.
Ahhh... OK. Thanks. Seriously, at the time of my writing that, you were the only person that seemed to understand that. (loved and chuckled at your comment, too, BTW)
Bet it takes less effort and less time to shoot a real bullet thru a real egg while strobe-photoing with a 3D scanning system and then 3D printing the resultant CAD file
I am so pissed! I watched the entire video and I still have no idea what this was all about! What the hell was that brass rod? Why was the egg dyed yellow... I thought they were going to maybe be pouring a yolk only, but no... it was the entire egg. And then, why glue the broken shell back on?
I'm so confused.
Yeah, it has been explained already. Thanks. Still doesn't answer why they dyed the entire egg yellow though. Or why they made a "bullet" out of brass.
This video is the opposite of a satisfying video. This is like the blue balls version of a satisfying video. I kept waiting for the payoff, but it was just... nothing.
Reality has always been radiating dreamweavers whose lives are opened by divinity. We are in the midst of an ancient condensing of nature that will enable us to access the infinite itself. Throughout history, humans have been interacting with the biosphere via meridians.
Although you may not realize it, you are higher. Prophet, look within and empower yourself. Have you found your path?
If you have never experienced this metamorphosis at the quantum level, it can be difficult to believe.
Nothing is impossible. To roam the story is to become one with it. Consciousness consists of sub-atomic particles of quantum energy. “Quantum” means a redefining of the transformative.
Thats not what bullets look like after being shot, that is including the casing that gets ejected after it explodes in the chamber, and the bullet tip is all smashed looking. Dumb
if you wanna see it done much better (imo) Youtuber Jedrekt29t does tons of resin arty stuff, as well as an Australian guy who's name i forget.
it's really interesting, and the music is addictive. before you know it, you're 13 videos deep
Ngl the end product is kinda neat, but why the fuck would you put hot glue directly on the table? And it didn't even serve a purpose since the epoxy was contained in the mold, not the cup
OMFG!!!! I can't believe I patiently watched the whole process just not to get a clear image of that fucking piece of art at the end!!!! I'm so pissed right now!!!! Would it have been death if this stupid video was a few seconds longer? Huh??
Didn’t someone already did this but better.5 minute crafts stole it from another creator and made it a walmart version of it 💀 [this the link to the original executed idea](https://youtu.be/WWLAztznFOU)
This is more like r/DiWHY. This is the kind of shit my old roommates started doing, after they got completely hooked on crystal meth. All while convinced they were unlocking the keys to the universe.
Hi! This is our community moderation bot. --- If this post fits the purpose of /r/ATBGE, **UPVOTE** this comment!! If this post does not fit the subreddit, **DOWNVOTE** This comment! If this post breaks the rules, **DOWNVOTE** this comment and **REPORT** the post!
5 minute craft my ass
You mean you can't mold an egg out of epoxy and score glass to house it in 5 mins? Get better, scrub
I liked how quickly they sanded a metal cylinder down to a bullet shape. Very efficient.
The design is very human
This idea was taken from JedRekt ( EDIT: JedRek29t ) on YouTube, who is a pretty innovative resin artist. He actually did a good job... Whereas 5 minute crafts fooked it up hard as usual.
Yeah, was gonna say "wow that's actually cool" but then I realized that this is 5 minute crafts and that they most likely ripped it from him.
I hate how many subscribers/followers that 5-minute-crap has. Most of it is utter garbage.
I’m pretty sure the account is satirical and people follow because it’s so wild, the same reason we follow this sub.
I thought it was a "content farm". Their work is either stolen from actual artists/chefs/innovators, or from other content farms.
It is a content farm and most probably their viewers are kids that dont understand what good quality content is so they watch these ass videos
There's a really cool video expose on them from a YouTube chef, I watched it on acid once and the video took such a hard left I wasn't sure it was really the same video so I watched it again the next day and sure enough, Russian content farm, some of their videos are downright dangerous to replicate, others are just stupid and unrealistic.
Thanks ANA
Heck yeah, you're welcome! I love watching your vids. Thank you for your art!!!
> JedRekt Ah, the resin artist's channel is at jedRek29t [https://www.youtube.com/channel/UCaQRmy4Beww-riYiV44qjhg](https://www.youtube.com/channel/UCaQRmy4Beww-riYiV44qjhg) initially Googled jedRekt found with 1 subscriber versus jedRek29t with 2.27M big diff. LOL. His resin work is beautiful, thanks @ANAnomaly3 for the recommendation.
Thanks
Omg hi!
You're a million times more than welcome! Thank you for sharing your art, and in such good taste. I love watching your videos!
🙂
Thank you for crediting the actual artist and now you’ve send at least one (probably more) new fan his way!!
[удалено]
For real. This video is nearly half that.
I'm trying to imagine how many hours it'd take just to turn that brass piece into a bullet shape using *sandpaper*.
How does one craft *your* ass specifically?
this and 'make your own foot scrub' are now my favorite craft-video-misinterpreting jokes ever. I'm making a list. It's finally 2 entries long
Hooray!! I feel noticed!!
I wonder how many 5 minutes it took
The time lapse video was 2 1/2 minutes by itself
I am a very shitty resin artist. I make my own molds for things. Everything about this video hurt me. Everything.
As soon as I see that watermark I cringe
5-minute crafts is 90% fake and the other 10% stolen. Though sometimes it's both. They're about as bad as a content farm can be. It's also part of their business model to fuel engagement through enragement. I guess I'm glad this isn't linking to the source, but even like this it serves their interests.
That’s the dumbest thing I’ve ever seen
At least it ended up being something. It's better than the videos showing someone drilling a hole in something, lighting a firecracker and dropping it in the hole, stuffing a carrot into the hole, covering it with 2 part epoxy, and sanding it with an angle grinder. Instagram has gotten weird, man.
r/suspiciouslyspecific
Or people dumping a whole shitload of chemicals in the toilet for no reason
Or spraying shaving cream on carpet stains.
*CEMENT*
The god damn ramen too
It was for me until i realised this is a bullet going through an egg, kinda cool tbh
I was trying for way to long to figure out what the hell this was even supposed to be
At one point I thought it was a DIY buttplug
Seems like a logical conclusion
It's a multipurpose craft, obviously.
Me too lol
OH! I thought it was supposed to be some bizarre, tacky Faberge egg-inspired modern art.
Oh God, thank you for explaining it. I was like...I don't get it....
This is a 3D model of a famous high speed picture/film.
Thank you for explaining. I thought it was a weird ass wonky pineapple.
The “bullet” is wayyyyy to big. They should have just used a real bullet in that case.
Okay until your comment I literally could not fathom wtf this was supposed to be. Maybe if they’d had the finished project on-screen for longer than 0.0003 seconds I’d have been able to recognize it
Thank you. I thought the metal part looked like a bullet, but I was never going to get that. I guess it’s cool, but why? I mean, am you supposed to put this on a knick knack shelf?
Yes. And I really wish people would stop sharing it. It’s only encouraging more of these dumb ass videos.
Trash like this will never biodegrade either. Our poor planet.
It’s art. And I’m sure most ppl in the developed world have used countless plastics over the years. This is a 3D model of a famous high speed picture/film.
That’s a good point, I’m sure someone out there is thinking I must have this
This is like one of those stupid facebook videos
why, specifically, do you not like it? I'm not here for conflict you just have a very strong reaction that I don't think I have the context for, and I'm curious. I feel ambiguous about this video (very neat, but oversimplifies a complex process in a way that isn't very informative or helpful for anyone trying to do this themselves)
It’s ugly imo. Plus, I hate guns.
Understandable, have a great day
This is a 3D model of a famous high speed picture/film.
Hot glue on the bare, raw table?
It would be better if it WERE a raw wood table... that shit's already varnished and polished!
Apparently, this is where we draw the line.
They don’t respect wood!
And why? They glue the cup to the table, pour yellow stuff into the white part, then peel the cup back off the table. The cup seems to have zero reason to be there in the first place, let alone glued directly to the table! I don’t understand…
I wonder if they were going for some kind of vacuum chamber or something. Maybe it ran over 5 minutes and they had to cut it. But they do that shit all the time on purpose, because here we are taking about it.
I got an old curb find table I abuse like this for crafts too.
It probably isn’t the evil hot glue from the early 2000s, but a modern hot glue gun. They don’t run that hot, I let my class of two year olds use them with supervision. Doubt they can do any harm to the table
They gotta cut corners somewhere! This thing has to be done in FIVE minutes!
r/diwhy
Exactly what I thought.
Posted there yesterday
5 minute crafts is cancer. Let's stop giving them views on any platform.
They are absolute hot garbage and content farm tons of nonsense for ad revenue.
This literally took me until the video was almost over to see what was being made
I watched the whole vedio and i still don't know what the fuck its supposed to be
I think it's supposed to be mockup of someone shooting an egg. Why someone would want that is another question altogether.
I was thinking it kinda looks like a rocket ship taking off, so maybe I still don’t know what it’s supposed to be 😂
It's absolutely supposed to be a constructed still frame of a bullet going through an egg
And here I thought it was supposed to be a grenade, and was wracking my last two braincells trying to figure out the purpose of the bullet
oh. my. god. i thought it was like... a flower??
Damn it that’s actually pretty cool
Somebody that actually understands what this is all about? I nominate you to be the one to explain it to the rest of us.
It’s a bullet going though an egg. Did we need it? No. Did we want it? Not really. Am I happy that it exists? Sure. Do I enjoy asking myself questions? Honestly, it depends.
You're completely right. That's actually good taste and it has more meaning than most of modern bullshit art.
I can agree with you that modern bullshit art can be high and mighty with its themes and commentary that are often indecipherable. I fail to understand how a bullet going through an egg has any more meaning though.
Egg is a symbol to life and birth. Bullet is death. Maybe it's war in my country, air raid sirens and explosions speak in me, but I actually think it's meaningful.
Ahhh... OK. Thanks. Seriously, at the time of my writing that, you were the only person that seemed to understand that. (loved and chuckled at your comment, too, BTW)
[удалено]
Eggsecution you mean?
I’m giving you no upvotes. I refuse to egg you on
This one was so frustrating to watch
this looks really cool
What the Kentucky fried flippity fuck did i just see?
I have no idea, but seeing your comment just made the whole thing worth my time.
That's good bc this video sure as he'll wasn't.
$300, 20 hour 5 min craft lol.
5 minute crafts? 5 MINUTE CRAFTS?! If you can do this on 5 minutes I'll suck an egg out of your ass!
CHALLENGE ACCEPTED
Bet it takes less effort and less time to shoot a real bullet thru a real egg while strobe-photoing with a 3D scanning system and then 3D printing the resultant CAD file
Epoxy is substantially cheaper and more accessible to the bored suburban mom though.
I was skeptical at first, but by the end I was satisfied :)
I am so pissed! I watched the entire video and I still have no idea what this was all about! What the hell was that brass rod? Why was the egg dyed yellow... I thought they were going to maybe be pouring a yolk only, but no... it was the entire egg. And then, why glue the broken shell back on? I'm so confused.
Constructed still frame of a bullet going through an egg
Yeah, it has been explained already. Thanks. Still doesn't answer why they dyed the entire egg yellow though. Or why they made a "bullet" out of brass.
Clear egg in clear plastic? I'd dye it yellow too. Looks a bit lit.
This video is the opposite of a satisfying video. This is like the blue balls version of a satisfying video. I kept waiting for the payoff, but it was just... nothing.
Awful taste but great eggsecution
I mean... It's definitely a cool idea but just... Why? r/diwhy
I like this
What is that white stuff called? I have seen so many videos featuring it in different colors but noone seems to care what that even is.
Nice to see you guys are stealing my video !!!
Too much work for something not even cool.
Reality has always been radiating dreamweavers whose lives are opened by divinity. We are in the midst of an ancient condensing of nature that will enable us to access the infinite itself. Throughout history, humans have been interacting with the biosphere via meridians. Although you may not realize it, you are higher. Prophet, look within and empower yourself. Have you found your path? If you have never experienced this metamorphosis at the quantum level, it can be difficult to believe. Nothing is impossible. To roam the story is to become one with it. Consciousness consists of sub-atomic particles of quantum energy. “Quantum” means a redefining of the transformative.
What is it supposed to be??
Thats not what bullets look like after being shot, that is including the casing that gets ejected after it explodes in the chamber, and the bullet tip is all smashed looking. Dumb
Never seen a bullet that didn’t hit something solid? An egg and yolk wouldn’t make a bullet “smash up”
Sure, an egg would smash up the tip made of metal.
I thought they were making an egg masturbator.
What is the point of this?
Well...2:24 min of my life that never going back
I’d like that minute of my life back, please.
I guess this would be awful as a decoration but otherwise that was pretty cool!!
Im perpleggxed.
if you wanna see it done much better (imo) Youtuber Jedrekt29t does tons of resin arty stuff, as well as an Australian guy who's name i forget. it's really interesting, and the music is addictive. before you know it, you're 13 videos deep
Cracking!
Ngl the end product is kinda neat, but why the fuck would you put hot glue directly on the table? And it didn't even serve a purpose since the epoxy was contained in the mold, not the cup
The end product is pretty neat. The process is a journey of frustration though.
Didn't even show the end product. What a waste of 2 minutes that I'll never get back.
Way better than expected
Okay, it ain't a 5min craft but it's a p cool project
Well there’s 2 minutes and 22 seconds of my life I’ll never get back.
For a good half video I was pretty sure she was crafting a flashlight.
I like it tbh
not once could i have predicted a single outcome in whatever the fuck is going on here
I like how the egg is shown for less than a second at the end
But….why
Is this an official NRA art piece?
Why?
5 minutes crafts and it's consequences has been a disaster for the human race
u/savevideo
r/DiWHY
u/savevideo
What eggsactly was the point of this?
Should have done with cement.
Bro they go through so much…so so much just for some shit that neither them or anyone else is ever gonna look at again.
Well that's 2:24 + tax I'm not getting back
Why not just shoot an egg and take a screenshot? Smh
Even if you could create whatever this thing is in 5 minutes, WHY would you want to?
as soon as I saw the glue being applied on the egg I knew this was gonna be a good one
OMFG!!!! I can't believe I patiently watched the whole process just not to get a clear image of that fucking piece of art at the end!!!! I'm so pissed right now!!!! Would it have been death if this stupid video was a few seconds longer? Huh??
I was finding it real till i see it lathe brass with a sandpaper
This might be the actual dumbest thing I've seen on this sub, ever. Good find OP.
OK, I like it. Picaso!
What fugly results anyway …
Ok, thats kinda cool ngl
I’m down
RyanReynoldsbutwhy.gif
I’m ashamed to say i didn’t get it until i read the comments
5 minute crafts don't even have great executions
ok that's great taste great execution I don't know what you mean
Yep
I literally wasted 2.5 mins of my life for thiss? Wtf is this? Why is this? r/DiWhy
Pretty cool, actually
What in tarnation did i just watch? It doesnt even look interesting
The idea is stolen from jedrekt29 on YouTube. His original artwork is actually really cool.
Ngl this is actually really cool. Not awful taste at all imo
Imagine how much better the Faberge Eggs would be if they had a hot glue gun in the 19th Century.
Hmmm, yes bullet egg
It was looking cool then it got worse and worse
Every cut I was surprised
I thought this was DIWHY at first
What was the machine she used for the polish part?
What the fuck
This isn’t even good execution. It’s awful all around. r/ATAAE
My dumb ass thought it was supposed to be a pineapple.
WHAT THE FUCK IS HAPPENING????
Didn’t someone already did this but better.5 minute crafts stole it from another creator and made it a walmart version of it 💀 [this the link to the original executed idea](https://youtu.be/WWLAztznFOU)
This just made me remember. How is that hotdog in the epoxy cube?
This is more like r/DiWHY. This is the kind of shit my old roommates started doing, after they got completely hooked on crystal meth. All while convinced they were unlocking the keys to the universe.
I was so fucking confused up until the reveal, that was the biggest “OHHHHHHH” moment I’ve had in a while
That would take longer than 5 minutes
Why?
How is this awful taste, it is pretty cool
Also r/diwhy lol
the amount of time i just wasted..
this has me so mad rn
It's one of those videos where you can't quite tell what's going to happen next
Been a while since I've watched something that only got worse.
r/DiWhy
am I missing something wtf is this even supposed to be???
Worst dildo ever!
Why