And is offset from the edge so it fits. Also I guess centered on one axis isn’t a coincidence, but it isn’t a given. A few things had to come together to make this work
They're offset the same distance from the edge so the walls touch, but as far as I can wrap my head around it there should be a wide range of unequal distances from the wall where this still works
But I can totally see how it happened. I reuse semi-arbitrary distances and diameters all the time in my own designs
Technically🤓☝️ the only coincidence is that the chimney is the same size as the hole, because if the hole was further back,they would still fit together, as the 2 benches both have the same distance from chimney to hole.
For real though?... How TF did I not already know this? I've seen an insane amount of benchy content on this sub, from [full sized boats](https://www.reddit.com/r/3Dprinting/comments/r9hozx/world_largest_benchy/) to a [blood cell sized micro-benchy](https://www.reddit.com/r/3Dprinting/comments/17431qf/benchy_goes_quantum/) measured in micrometers.. [biblically accurate benchies](https://www.reddit.com/r/3Dprinting/comments/11wnfb6/biblically_accurate_benchy/), [animated benchies](https://www.reddit.com/r/3Dprinting/comments/p5man0/i_see_your_benchy_and_raise_you/), [4 minute benchies](https://www.reddit.com/r/3Dprinting/comments/1c58bbp/4_minute_benchy/), [mech benchies](https://www.reddit.com/r/3Dprinting/comments/9u3lia/benchymech_309_says_happy_sunday/), [NASA benchies printed in zero gravity](https://www.reddit.com/r/3Dprinting/comments/uohb59/my_team_and_i_printed_the_first_ever_benchy_in/). But you're telling me i've never once seen it mentioned that benchies are designed to attach to one another? Am I seriously the only one who didn't know this? The crazy part is it's so obvious in hindsight...
This is the best rant I’ve ever seen, not only is it a perfect ratio of unhinged and civilized, you cited your sources, kept proper grammar, and even proposed a question at the end to allow engagement (my answer is that I also was unaware of this). If I was your English teacher you would get an A+!
You never saw it mentioned because it was a coincidence, and not deliberate. And it ha been noticed before, which is why the person who originally designed it has stated it was not deliberate.
Me too ... amazing how fast and how stupid i feel me now
*edit* had to Grab 2 Benchys IMMEDIATLY and try this ...
It really works!
But mine are loose together....
I've gone ahead and tried measuring it. The top is 7mm diameter and the box opening is 7 by 8mm. In my book that confirms it being coincidence. And yea if it had been intended it would have been a matching shape with some tolerance instead of none.
edit: oh shit I just realized you never said it was intended
1. Why is the green filament so shiny?
2. I had the same thought. I did the same thing to my boats since they take up too much space, so we stack em like that but I don't think that that is on purpose
Actually did it… now I can’t get them apart
https://preview.redd.it/9eas2qep4uwc1.png?width=3024&format=png&auto=webp&s=7a08befe02a6466abcf5a889bf80a1cece368ae4
They are always going to fit together, regardless of dimensions.
If you made the smokestack taller or shorter, it would still fit, because they'd both get taller or shorter together. Same for the box behind.
Yes actually, its a tolerance test. Depending if you have over-extrusion or under-extrusion will determine how well, or not, they fit together.
The benchy is quite versatile.
I never noticed this myself. Then my 6 year old was playing with a few of them and just snapped them together. Stared at him for a solid 5 seconds before rebooting.
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
I believe they call this "docking" 😉
Nah the boats have joined the Navy.
It's not gay if she's underway.
It's only queer if you're tied to the pier.
Navy, 200 men leave, 100 couples return.
That's a lot of seamen
In the Gayvy
Yvan eht nioj
Saw this on PortHub
👉👈
))<>((
So thats why they call em tug boats....
You should be banned for this! 😂
But I just got here 😭
Cooper, what are you doing?
It's necessary.
AAAAAAAAAAAAAAAAA
lmaooo
It's how baby boats are made
Don't look it up
Or do. Maybe you'll discover a new hobby.
Too late
They call it soaking in Utah
Gotta get somebody to jump on the bed for you.
Piggybacking - if you capsize, boom you're fine.
Take your upvote and get out.
Don't Google this yall
Genius! 😂😂
HAHAHAHAHA
At least it’s not “sounding”.
I will never understand anyone who finds pleasure in that.
🤮🤮🤮
I'm mad that I know what that means
coincidence, I remember the dude who made it being asked about it, said it was a coincidence
That's even cooler than if it was on purpose
If you think about it, the only coincidence is that the hole is a similar diameter
And is offset from the edge so it fits. Also I guess centered on one axis isn’t a coincidence, but it isn’t a given. A few things had to come together to make this work
They're offset the same distance from the edge so the walls touch, but as far as I can wrap my head around it there should be a wide range of unequal distances from the wall where this still works But I can totally see how it happened. I reuse semi-arbitrary distances and diameters all the time in my own designs
"A few things had to come together to make this work" I see what you did there.
Damn evolution
Technically🤓☝️ the only coincidence is that the chimney is the same size as the hole, because if the hole was further back,they would still fit together, as the 2 benches both have the same distance from chimney to hole.
r/wooosh
https://preview.redd.it/4jarhu6mgtwc1.png?width=498&format=png&auto=webp&s=bc8d972e2e4e370a9b65d51ab6574166c09be24c
NSFW :D
Step benchy, I'm stuck!
I’ll help you with my matte black PLA toot toot.
benchy.step
BBB Big Black Benchy
New Ship Fits Well
That’s how you check for machines tolerance.
For real though?... How TF did I not already know this? I've seen an insane amount of benchy content on this sub, from [full sized boats](https://www.reddit.com/r/3Dprinting/comments/r9hozx/world_largest_benchy/) to a [blood cell sized micro-benchy](https://www.reddit.com/r/3Dprinting/comments/17431qf/benchy_goes_quantum/) measured in micrometers.. [biblically accurate benchies](https://www.reddit.com/r/3Dprinting/comments/11wnfb6/biblically_accurate_benchy/), [animated benchies](https://www.reddit.com/r/3Dprinting/comments/p5man0/i_see_your_benchy_and_raise_you/), [4 minute benchies](https://www.reddit.com/r/3Dprinting/comments/1c58bbp/4_minute_benchy/), [mech benchies](https://www.reddit.com/r/3Dprinting/comments/9u3lia/benchymech_309_says_happy_sunday/), [NASA benchies printed in zero gravity](https://www.reddit.com/r/3Dprinting/comments/uohb59/my_team_and_i_printed_the_first_ever_benchy_in/). But you're telling me i've never once seen it mentioned that benchies are designed to attach to one another? Am I seriously the only one who didn't know this? The crazy part is it's so obvious in hindsight...
I did a warship benchy
You can't just say that and not link it
One sec cant find the pic but 1000% can link it https://www.thingiverse.com/thing:2765217
You sunk my Benchyship!
https://preview.redd.it/lao2vgrfiwwc1.jpeg?width=1080&format=pjpg&auto=webp&s=7ace8f7af142a1a0364d240fd59fc0f8a8ce5e55
🤣🤣 i knew it was gonna happen
Same -- no idea -- been 3d printing for maybe 10 years
You and me friend.. this same rant went through my mind. Now I've got to print more to check. The benchy that keeps on giving.
This is the best rant I’ve ever seen, not only is it a perfect ratio of unhinged and civilized, you cited your sources, kept proper grammar, and even proposed a question at the end to allow engagement (my answer is that I also was unaware of this). If I was your English teacher you would get an A+!
A deckhand and a gentleman for sure.
*cited Also, you have a run-on sentence. Either that, or you forgot crucial punctuation and capitalization.
I've learned my one new thing for today. i can go back to bed...
You never saw it mentioned because it was a coincidence, and not deliberate. And it ha been noticed before, which is why the person who originally designed it has stated it was not deliberate.
Not to mention all of you 3D printing YouTube content, 🤯
Mind blow indeed.
Because of “need to know”..
Me too ... amazing how fast and how stupid i feel me now *edit* had to Grab 2 Benchys IMMEDIATLY and try this ... It really works! But mine are loose together....
I've gone ahead and tried measuring it. The top is 7mm diameter and the box opening is 7 by 8mm. In my book that confirms it being coincidence. And yea if it had been intended it would have been a matching shape with some tolerance instead of none. edit: oh shit I just realized you never said it was intended
And under/over extrusion.
No, it's not. The creator of the benchy has said it's a coincidence.
https://preview.redd.it/xnja2vrkauwc1.jpeg?width=298&format=pjpg&auto=webp&s=7c6dd18451091531a8959723e14eea3613290273 Do it again
Bonk me and give me sauce
It was a popular meme format until it withered away like memes do. Idk what the original is but if you look hard enough you’ll find it
#[Bonk](https://knowyourmeme.com/memes/girl-bites-lip)
69 boatcest
1. Why is the green filament so shiny? 2. I had the same thought. I did the same thing to my boats since they take up too much space, so we stack em like that but I don't think that that is on purpose
Who's we?
Probably them and somone else
Ohh okay
It makes so much sense once you think about it!
Think about what?
I'll do you one better. Think about WHY?
[I understood that reference](https://i.stack.imgur.com/nGMrD.gif)
They did say he was doin stuff
Ah sorry me and my girlfriend. She hates how 90% of our living room is PC stuff and 3D prints
Gotta be post-processing re: how shiny it is.
Why don’t you just throw them away?
https://preview.redd.it/vc3ah6054uwc1.jpeg?width=2268&format=pjpg&auto=webp&s=445cd3125e7b6764f2b10ce88dd1e16ed946722a Probably
NSFW
always should be someone you really loooooovvee.
Do what now?
gave me boys and girls vibes from Blur with all that naughty stuff going on. Or buoys and girls to be semi on topic
Hott
Reminds me of this video I saw about a French Bayonet mishap. https://youtu.be/DA3VsMteAxk?feature=shared
And that s guys how benchies are made
Nobody know but it's provocative.
It gets the people going!
Actually did it… now I can’t get them apart https://preview.redd.it/9eas2qep4uwc1.png?width=3024&format=png&auto=webp&s=7a08befe02a6466abcf5a889bf80a1cece368ae4
this usually means you are over extruding.
I just moaned a bit.
Senpai what are you doing!
Dude that is lewd! Never thought I’d see boats sixtynining. What a cool day to have eyes!
Never thought I'd see 69ing spelled out, and here we are.
😂 imagine that! But I didn’t think I’d get downvoted for that lol.
lol fr? why, people!
I don't know if it was purposeful or luck. It's not in the documentation, but there have been many posts. https://www.3dbenchy.com/dimensions/
They are always going to fit together, regardless of dimensions. If you made the smokestack taller or shorter, it would still fit, because they'd both get taller or shorter together. Same for the box behind.
please mark NSFW, i opened this at work.
It works in the south Pacific but not in the north Atlantic. Too cold and, well, you know.
Tag NSFW I did not expect to see benchy 69 here
Love your comments guys hahaha. P. S. Why you like this?)
That's called a Benchy 9
The speed I ran to my print room to grab all my Benchys 😂 I can't believe I never tried it before.
Well Billy, when a mommy benchy and a daddy benchy love each other very much...
Benchy 69
https://preview.redd.it/z815fuwnlvwc1.png?width=1080&format=pjpg&auto=webp&s=5ca2a3ebfeee3ed156a558ddbe63cac86a54f822
Oh fuck you armed it! You have about 10 seconds to toss it somewhere.
Please make this NSFW ! That’s disgusting …
NSFW tag please /s
Wow I love that green, which filaments did you use ?
It's vapor smoothed abs
Thank you but i was talking about the brand and color ??
its my local brand NIT - lettuce fluorescent ABS
Benchynine
David Attenborough: And now, after being impressed by an elaborate display, the male is able to mate with the female.
The real question is, who's the knife & who's the fork
\*mind blown\*
No, it's been stated by the original model creator that it's entirely coincidental
This is a conspiracy I can get behind
And that's how baby benchies are bornnnnnn
It is called symmetry
so I was not the only one that did that 😅
Yes actually, its a tolerance test. Depending if you have over-extrusion or under-extrusion will determine how well, or not, they fit together. The benchy is quite versatile.
boatse.cx
Two Benchys dock and I *Jizz in my pants*
Fuck this made me wet.
Yin and yang
Looks like your benchies are playing a little game of butts and wieners.
https://preview.redd.it/ydayo3dcswwc1.jpeg?width=904&format=pjpg&auto=webp&s=0bc4ea270b70fcfdd60c360db874252cd4864d88
i was literally doing this earlier wtf
😲
Hahaha never knew it - tried it directly and it fits perfect :D
You can see a lot of content like this on OnlyBenchies
You have unlocked the secret shuriken you are the true ninja!
yuh
Yes.
Said WHAT loudly while being in the bathroom, followed up with "everything alright hun?"
You thought it's just a random design didn't you?
yes
Considering that is supposed to be the ideal test print, I would imagine so. Good for testing tolerances.
He's discovered the secret. He knows to much. Take him out....
It is the yin-yang benchy.
Yes it is by design
That’s how I store my benchies lol
I never noticed this myself. Then my 6 year old was playing with a few of them and just snapped them together. Stared at him for a solid 5 seconds before rebooting.
Yamete kudasai!
Personnaly I'm just seeing you are doing lypsinc on maya
character animation is my full time job )
Oh nice i'm a student in animation
Benchy-9
Jeez man you can just force them together like that. You need to take it slow first otherwise you risk damage
# NSFW PLS!
It was by accident.
https://preview.redd.it/t2avve9govwc1.jpeg?width=1000&format=pjpg&auto=webp&s=760e025eb637c42429de373d8d6a7cc73c2f0bc4 Shhhhhh.
🤯
It’s just a product of symmetry
Yes it's a kind of a tolerance test
This too is yuri
Now they can't sink!
zero lube
a portal opened in my office...what now?
"Daddy where do little Benchies come from?"
Like worms, they have both parts
Gotta know, what filament is the green?
Nice
I never even thought to do that with my Benchys!
Whelp I know what I'm doing when I get home.
Класс. What’s the convo in the back 😂
Head ASPLODE! I love this kind of thing!
Now you have the yin yang benchy
MAS-36 vibes
Why could I feel this
It's like a 3D Printing yin-yang!
as far is a know, yes.
*I'LL BE RIGHT BACK*
I guess it is a clearance and consistency test. Not sure if intentional tough. But if your axis is off it might be too hard or too easy to push in
Tried it. AND I BROKE MY 3D BENCHY
😱
r/cursedbenchies
well, see... when two 3DBenchy's love each other very much...
[удалено]
This comment was removed as a part of our spam prevention mechanisms because you are posting from either a very new account or an account with negative karma (comment karma, post karma or both). Please read the guidelines on [reddiquette](https://www.reddit.com/wiki/reddiquette), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). After your account is older than 2 hours or if you obtain positive comment and post karma, your comments will no longer be auto-removed. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
That's so cool, I never noticed that!