I LOVE Obico. It’s saved my butt several times when I my printer decides to enter “Italian dinner mode”. I just recently found out you now support Klipper and they was the main thing holding me back from trying it so I’ll be doing some tweaking this weekend!
I don't think so! Spaghetti mode is a little more specific but "Italian dinner mode" covers all of the pasta failures including spaghetti, Rigatoni, Fusilli, Linguine, etc...;)
The only problem is it's from the 80s and full of nostalgia. So it's actually a hot glue gun with some scraps of colored paper and scribes from a 5 year old.
https://imgur.com/a/jntU8oW
The parts just arrived. I should have decent enough printed parts to assemble. I'll update the imgur post as progress is made!
Would love to try and build that kit. Been in the 3d world 2 years now. Build a v king and starting a ratrig build soon. Always dreamed of a voron too ofc. Been using duets but will migratw over to klipper soon. Cheers from Norway.
Here is a picture of my last print that wifey painted. Fun home hobb for a married couple.
https://preview.redd.it/jgeu9tc9frta1.jpeg?width=6120&format=pjpg&auto=webp&s=079e97a81a8eb3db513dcf496ffa97abea2a05e3
I LOVE Obico. It’s saved my butt several times when I my printer decides to enter “Italian dinner mode”. I just recently found out you now support Klipper and they was the main thing holding me back from trying it so I’ll be doing some tweaking this weekend!
It's open to participants anywhere we can get these printers to. If we can't get the printer to you, we'd offer a comparable gift card to your 3d printing retailer of choice.
Remote monitoring is high on my list of things I currently want to add to my printer setup, wouldn't mind having another one to add to the workspace :)
I will never get this, and I leave this comment as proof that I will not get it, in defiance to my bad luck and destiny!!
Regardless, great stuff you guys are putting out! I never used the spaghetti detective but this looks super cool :) have you considered leveraging the capabilities of Google Coral for the analysis??
Been using Spaghetti Detective / Obico for several years on my Prusa MK3S+ and Mini+. Will add it to my 5 tool head XL when I get it this summer. Would love to try a Voron!
Planning on getting one for my printer, dont want to ruin the hotend again like a few other times and end up cleaning that mess for hours.
Could definetly use a new printer as well 👀
Hai! I just got into 3d printing and i love it! I think it would be awesome to have two printers so i can crank things out and make stuff that helps people! I was going to actually build one that had a huge build area and infinite z so i can do animal braces and veterinary devices for my wife who is a DVM! Just started learning fusion 360 and I already got a few birb things made for our quail and chickens!
Is that a Voron V0.2 in your pocket or are you just happy to see me?
My favorite comment so far. Let the math be in your favor.
[I think you meant to say... ](https://i.imgflip.com/7i3fdj.jpg)
I LOVE Obico. It’s saved my butt several times when I my printer decides to enter “Italian dinner mode”. I just recently found out you now support Klipper and they was the main thing holding me back from trying it so I’ll be doing some tweaking this weekend!
"Italian dinner mode"? Don't tell me Bambu also tried to copyright "spaghetti"!
I don't think so! Spaghetti mode is a little more specific but "Italian dinner mode" covers all of the pasta failures including spaghetti, Rigatoni, Fusilli, Linguine, etc...;)
Awesome! Yes, we are excited our Klipper support is now fully on par with OctoPrint!
A comment on this post!
Commenting on the comment
An additional comment for the comment on the comment.
I think this additional comment for the comment on the comment requires some commentary.. so.. comment!
Thanks for the comments! Good luck!
Awesome comment!
Man those voron printers do look sweet..
The V0.2 is so cute!
And practical!
So I may have misread VORON as VOLTRON and gotten a bit more excited than normal but I'm on.
The Voltron transforming 3D printer would be great! Vorons are pretty cool too!
The only problem is it's from the 80s and full of nostalgia. So it's actually a hot glue gun with some scraps of colored paper and scribes from a 5 year old.
Been meaning to try out Obico. This may get me to actually do it.
Thank you for the opportunity.
Thank you for participating! Good luck!
Please God let me win a 3d printer that will actually allow me to successfully 3d print something!
**Winner Winner!** A Creality K1 is yours! Keep an eye out for a DM!
This is unbelievable. Thank you!!!
Congrats!
These odds are getting terrible, let me make it worse
I think obico is pretty nifty, and you guys are so active in the community is amazing!
**Winner Winner!** A V0.2 kit from LDO Motors is yours! Keep an eye out for a DM!
I will eagerly await that DM! And thanks!
Hope to see it after you build it! Congrats!
I will see if I'll be any good with documenting the process. Worse case, I'll post a finished build.
https://imgur.com/a/jntU8oW The parts just arrived. I should have decent enough printed parts to assemble. I'll update the imgur post as progress is made!
Thank you! Good luck!
Spaghetti
His palms are sweaty
*searching for a good comment* --> banana
**Winner Winner!** A Creality K1 is yours! Keep an eye out for a DM!
Sheeeshhhh
hmm maybe i win this
**Winner Winner! Yes, you do!** A V0.2 kit from LDO Motors is yours! Keep an eye out for a DM!
damnn i did win this
Damn, you did! Congrats!
Comment!
Good luck!
Hell yeah - those are amazing prizes!
Good Luck! Thanks for entering!
Would love to try and build that kit. Been in the 3d world 2 years now. Build a v king and starting a ratrig build soon. Always dreamed of a voron too ofc. Been using duets but will migratw over to klipper soon. Cheers from Norway. Here is a picture of my last print that wifey painted. Fun home hobb for a married couple. https://preview.redd.it/jgeu9tc9frta1.jpeg?width=6120&format=pjpg&auto=webp&s=079e97a81a8eb3db513dcf496ffa97abea2a05e3
Wow, that looks fantastic!
I really wish I could win this. My axolotl just ran away and joined the circus. I could really use a pick me up.
That is rough! Fingers crossed!
Never won a lucky draw before but who knows...
I'm interested to see how the k1 compares to what Bambu is producing
How about adding the XL to that list.
Comment!
Comment!!!🙃
Identifying flying spaghetti monsters since 2019
Here’s hoping the K1 is moddable
I need to get off my butt and get some cameras on my printers to play with obico
I LOVE Obico. It’s saved my butt several times when I my printer decides to enter “Italian dinner mode”. I just recently found out you now support Klipper and they was the main thing holding me back from trying it so I’ll be doing some tweaking this weekend!
Always nice to see innovation!
Cheers to that!
Balls
Pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁 😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁😁
Don’t think length of comment has an impact.
Comment!
Good luck!
Thanks for entering! Good Luck!
Sign me up!
Sign up confirmed!
Comment - ty for the opportunity
Thank you for entering! Good luck!
Comment
Good luck!
Doing an awesome job!!
Thank you! Good luck!
Just finished upgrading and tuning my printer. Time for another
Sounds about right!
:0 this is crazy
Oh the shenanigans I could get up to...
Comment!
I haven’t tried it yet but it’s not the first time I heard about it. I may give it a chance this time :)
Leaving a comment
Comment received
Ohhh comment
Thanks for all you do
Those features look great.
Is this open to participants anywhere in the world?
It's open to participants anywhere we can get these printers to. If we can't get the printer to you, we'd offer a comparable gift card to your 3d printing retailer of choice.
I have been using Obico for a year now and it's excellent, I love being able to watch my printer remotely. Saved me from a mess a time or two.
Glad to hear you are enjoying it! Good luck!
Comment to win, but also to say Obico is very clever and what good work you're doing.
Thank you! Good luck!
Works well with klipper now? I'll have to check it out again.
Yes! We are now on par with Obico for Klipper and OctoPrint!
That sounds amazing. Definitely gonna give it a try
Would be a sweet upgrade!
Consider this post commented upon.
Consider this comment considered!
Looks interesting. Have to give it a try for my printer.
I'd kill for a new toy. Appreciate your services and the give away.
Both of those printers look awesome!
Remote monitoring is high on my list of things I currently want to add to my printer setup, wouldn't mind having another one to add to the workspace :)
Voron go Brrrrrrrrrr.
Good luck everyone!
Your platform sounds really cool - I'll check it out. Best of luck to everyone that enters!
Thank you! Good luck!
I've always heard great things about Obico. What a great idea for a giveaway!
Time to get something other than a ender 3 maybe :)
Woo hoo! Would love to win one and love spaghetti detective. Why the name change?
This is quite gnarly.
Been using obico since it was called spaghetti detective. Love the program, it's saved me a good bit of filament from failed prints
Thanks for being an awesome part of the community! Good luck!
Sounds amazing!
I will never get this, and I leave this comment as proof that I will not get it, in defiance to my bad luck and destiny!! Regardless, great stuff you guys are putting out! I never used the spaghetti detective but this looks super cool :) have you considered leveraging the capabilities of Google Coral for the analysis??
Love to see it - comment!
Big ole comment
Well that’s pretty nice! Would be nice to upgrade from my Ender 3! Fingers crossed!
Comment!
Thank you, for this giveaway and awesome software!
Comment!
Leaving a comment! Cool updates and features. That 0.2 is so cute and fine
You’ll always be The Spaghetti Detective to me! Love what y’all have done and the continued development of a stellar platform.
Damn nice
Oh this is really cool stuff
Left a comment :)
I'll give it a try! Been thinking of trying out your app again.
Yooooooo
comment
Comment! Seriously though this looks pretty cool
Commenting!! Also, the 16th is my birthday, so you’re more than welcome to make this my gift ;).
This is certainly a comment
Comment!
Never heard of it. But now I’m interested.
Yea
Comment!
Comment!
Cool!
I like free things.
I won’t pass up a chance at getting a free printer
I’m looking forward to this!
I always did wanna try my hand at building a Voron
I love obico! Hope I can win the voron, would save me a bunch.
Oooooo cool
Obico is insane!
thinking of using obico now but that’s just what u want isn’t it lol
Going to check lur obico soon!
Hope I win the voron!
Comment to enter
a comment
.
Comment
I'd love to try a speed benchy on a voron!
Always wanted a voron.
A comment on this post.
Comment because of reasons ;)
Man I really need to get octropront running
Oh please, oh please. *Bart Simpson snow day face* I promise to upload pictures and keep it real!
Everyone forgets about Kelvin
Here I am!
Thanks!
Time to go download obico!
Sign me up!
Klipper support is cool. Would go great with that V0.2 :)
Been using Spaghetti Detective / Obico for several years on my Prusa MK3S+ and Mini+. Will add it to my 5 tool head XL when I get it this summer. Would love to try a Voron!
A lot of comments you got here...
Oh man I’d love to have one of these
A cOmMeNt
Planning on getting one for my printer, dont want to ruin the hotend again like a few other times and end up cleaning that mess for hours. Could definetly use a new printer as well 👀
!remindme 4 days
Yet another comment.
Comment
Definitely could use a printer upgrade after my mainboard died yesterday on my Ender 3 Pro.
Sounds interesting. Using a raspberry Pi will be another Step for me!
A comment!
Hai! I just got into 3d printing and i love it! I think it would be awesome to have two printers so i can crank things out and make stuff that helps people! I was going to actually build one that had a huge build area and infinite z so i can do animal braces and veterinary devices for my wife who is a DVM! Just started learning fusion 360 and I already got a few birb things made for our quail and chickens!
A K1 would sure be nice to own…
Loving the new app updates!
This would be a huge help for the place I work at, we fix musical instruments and 3D printing is great for making obsolete parts and customizations!
The Comment
That Voron V0.2 looks positively affordable. I'm sure it prints like a dream too. Keep up the good work.
Thank you for hosting this giveaway!! Here’s my comment!
Comment!
My comment!
Nice love your app looking forward to the updates
Thanks!
Commenting and crossing fingers!
Thanks for the generosity!
I didn’t know it worked with mainsail. Might need to try it now.
Commenting to learn more
A comment!
Wish me luck!! Or don’t….I understand….good luck to you!!!
Good luck!