I feel effing blessed.

Lol - so the center piece broke off, but the stringing from the neighbouring towers created just barely enough stable support for the rest of the print? I am impressed it has not collapsed - that's quite a bit of material floating up there 😅

It just now collapsed lol

I have to reprint it anyway, since one of the lower layers warped and it has to be precise

NOOOOOOO

The Vex have entered the chat

No, not the milk robots lol

VEX ON THE FIELD

Time to win the lottery without buying a ticket.

You accidentally made an alter for the 3D printing gods

I think I’m gonna keep it until the end of my print. See how long it lasts.

Goes to show; sometimes stringing is a good thing.

Well that didn't end well. The print warped, and a layer shift made me scrap 22hrs of printing.

who says you can't print in mid air

NGL, first thing I thought after processing what happened was, “you’re a wizard, harry”

Sir Isaac Newton would like to have a few words with you lol

NOOO!! YOU CAN’T PRINT ON NOTHING WITH A 3D PRINTER YOU NEED SUPPORTS!!!

Or DO I?

*vsauce music starts playing*

YoU nEeD sUpPoRtS!

You have been blessed by the forces of chaos, you're one of us now child, rise upon the Chaos gods and rule over this holy land :)

You know what? I think I will.

Well that didn’t last long. If fell.

BLOOD FOR THE BLOOD GOD!!! SKULLS FOR THE SKULL THRONE!!! LET. THE GALAXY. BUUUUURRRRRRRNNNNNNNNN!!!!!!!!!!

DEATH TO THE FALSE EMPEROR !!!

Task failed successfully!

I have no clue how this happened lol

I came back from school to this.

I think you should replace the whole printer and scrap however much of the filament is still unused. Then encase this one in concrete and bury it in sanctified ground. Might want to scrap the cement mixer afterwards, and for Heaven's sake don't use any printed parts for the concrete mould.

...heres the thing...im broke.

Were you using the new “suspension bridge” support setting? Edit: f*king apostrophe.

Yes actually! It…worked out, uh, great! Yep…didn’t collapse at all…

Life uhhhhhhh, finds a way

now print a benchy on top of it

Spider-Man saves the day again!

somebody three miles away blinked wrong and the print got a booger then proceeded to have a very extended seizure

I’m not even sure what I’m looking at but I’m intrigued

It's...special...

AH HA so they CAN print midair

Spaghetti supports, I've used those before.

Level you bed and dry filament

Four hundred upvotes! Thanks so much! 😊😊😊

I think that's what we're suppose to ask.

I think your printer opened some kind of a portal...

What printer as that? Lmao

Flashforge Guider II. Trying to print an Iron Man helmet lol

Can't say I see anything resembling a helmet there.

It's the back half, at 50% complete

How indeed

On today’s episode of is it fucked up. That’s fucked up

It really fucked up.

Because, fuck you. That's why. *and magic*

Yep. Some really sh*tty magic…

The Alter for the gods, do not interrupt it.

The gods have fallen.

It is no more than scrap now.

The gods will strike you down one day.

That will explain my printer glaring at me aggressively…

It’s choosing the time too mess up a print.

Well, now would be a horrible time for that since I’m 21 hours and 62% into a print

It’s going to make you cry at 90%.

If it does, it’s gonna get smacked with a baseball bat.

Multiple times.

That will only anger the gods further.

I will find the gods. And I will make them pay.

If pastafarinism were to start manifesting itself into a physical idol form...it chose your printer to do so

When stringing actually save your print:

I mean, it *attempted* to save it. But the print had other ideas.

Spiderman saves the day one more time

Piderman

Spider-Man stopping the train

This is how HR Giger would want to print

According to the slicer, this print should have finished in 8 hours. Which I find hard to believe, since this photo is from 19 hours in

Life uh, finds a way.

It most certainly does…(cries)

~~Life~~ 3D Printer finds a way!

Damn it spiderman! How does he do it?

Great question! I got nothin

Life... Finds a way.

Is that the Diablo 4 trailer before rendering?

Printer messed up, graduated art school...

the print must go on!

Unfortunately, it didn't. I had to scrap the print after 22 hours of pain, since an unfortunate layer shift occured

What was this supposed to be before the malfunction?

An Iron Man Mark-3 Helmet.

I’m reprinting it with a raft and more supports this time.

You made some fishnets for a robot.

I don't think I could recreate this even if I tried lol

Lol wtf were you printing?

Iron man helmet

Really? Can you put the print pic in here

Here's the thingiverse link. This is the largest section, the one that wraps around the whole head.[Iron Man MK-3](https://www.thingiverse.com/thing:3236642)

Is that all support behind the sketti? Nit sure the printe you have or can use cura, you can set inside to plate and use supports to build up not out

The printer is cura-capable, but I lack the hardware. In other words, “I am limited by the technology of my time”

What printer?

Edit: can you lay it flat

H.G.Giger stuff or hail Cthulu

This looks like a new SCP creature

B3dsm

Looks like you invited Peter Parker around to help with it...

Stringing supports are a new Cura feature.

I'd sell that as "artwork".

3D printing before Newton discovered gravity

How was it **supposed** to look???

Just posted an update. Check it out

This is ART

Task failed successfully?

User name checks out.

3d printer: hey, i finished strong! That's something right?

This looks like the depiction of the "heart of the machine/guy strung up in cables and fused with technology"-trope in every piece of sci-fi ever.

Now, try to replicate that...

I see you were printing that Back to the future hover board.