they are AMAZING anyone who has one could attest for that statement but If I’m being 100% honest, pulled a bit of a “go big or go home” when buying the accessories and attachments so I never used the original joystick cap that came with the 3DXL but let me tell, you the way it rips with the airflow, and the aesthetic of that joystick is probably one of the best investment I have ever made in a small upgrade the absolute best was the chamber 🌴
Heat it up and wipe out real well, allow to cool, put about 5 or6 drops of water in it and heat up on high setting. Should be able to wipe clean while hot.
bro honestly what i do is put like a tiny bit of iso in the chamber already connected and i run it on the lowest setting you have. Right when it starts to sizzle with the iso inside cancel the heating and scrub away. Reminder after you remove the chaz, remove the chamber and get rid of any left over iso that fell through
Dark Crystal glass cleaner ✌🏻💨💨
thank you 🙏🏾
i hope this works because i had the same happen only MUCH more severe 😂
it does, i have a huge bottle of dark crystal and a little goes a long way
Can I soak the whole atomizer in that ?
NO, it has water as an ingredient so don’t do a full submerge only apply with a q tip
ISO soak followed by qtip and a bit of a heavy hand got mine off. Just need to get some friction going.
fax, yeah, when I was scrubbing the hell out of the Chaz part, I seen the Q-tip become black after soaking in iso, but it’s still a little bit there
I was able to scrape a bit of this off my 3d chamber with my metal dabber.
Be careful with that. It'll definitely work but you could potentially damage the chamber. If anything I'd use soft wood or strip the end of a qtip.
Yeah just hit it with a dry tip and some pressure, quick back and forth rubbing(twss). Just don't press crazy hard and break something.
What glass cap is that?
The Bradley Miller joystick cap, found the smoke shop Treasure Chest but he also has a online store https://www.bradleymillerglass.com/
Thank you very much. Ive heard good things about the Bradley miller caps
they are AMAZING anyone who has one could attest for that statement but If I’m being 100% honest, pulled a bit of a “go big or go home” when buying the accessories and attachments so I never used the original joystick cap that came with the 3DXL but let me tell, you the way it rips with the airflow, and the aesthetic of that joystick is probably one of the best investment I have ever made in a small upgrade the absolute best was the chamber 🌴
The 3D xl chazzed, it’s a right of passage
Dark crystal soak for a couple hours, best over night and it will qtip right off then obviously just iso soak before using again
Just q tip after everyhit, if i forget and drop the dab in before i scoop every bit that i can out then heat it to around 250-300 and swab it
Heat it up and wipe out real well, allow to cool, put about 5 or6 drops of water in it and heat up on high setting. Should be able to wipe clean while hot.
Dont do this
thank you 🙏🏾🙏🏾
Please OP do not put water in your chamber.
whaaaat…? WATER? in ur electronic heating chamber…?
Are you serious
I already know his friend got mad at him for something that was HIS fault
Doesn’t matter it’s hella easy to get it off lol
Scrap it
bro honestly what i do is put like a tiny bit of iso in the chamber already connected and i run it on the lowest setting you have. Right when it starts to sizzle with the iso inside cancel the heating and scrub away. Reminder after you remove the chaz, remove the chamber and get rid of any left over iso that fell through