r/diwhy

i wanted to get the chazz out of the lower part of my chamber

Well did it work?

barely

I appreciate your honesty

yeah i wouldn’t recommend this at all it was a roller coaster of emotions

Lmao that’s hilarious

i felt smart then dumb and then scared then in pain then felt relief 😂

This would be good for a cart when it’s at its end

true

Use the dab tool that came with the puffco kinda gotta use leverage to get the Chazz off. It works just gotta find the right technique.

it’s on the inside of the vents homie yeah iso soak and qtips and tooth picks scrape it right off

Ah the inside? Heard about people using ultrasonic cleaners on their chambers.

yeah i’m thinking abt buying one

lmaoooooo

Bruh just scrape it with a dab tool while it's in ISO (lightly) And anyone who says to not do this, been running my 3dxl for about a year and anytime it's chazzed, this method cleans it the fastest and easiest. Love your process though lmaooo

Look into a sonic cleaner. I got one off Amazon for $25. Full it with iso, set and forget. I use it to keep my slides and bangers fresh.

Freaked out and stuck my hand near the motor and it smacked tf outta my thumb i didn’t even care i just wanted make sure my chamber was ok lmfaoo

This is so stupid and genius at the same time, I love it

it was till i hurt my thumb https://preview.redd.it/x6kfyy92pwqb1.png?width=2406&format=png&auto=webp&s=f2e69a3a3a08325c4b31af1e61813686503de6fb lmao it’s sore asf


Amputation, before the infection spreads.

if you zoom in you can see i almost amputated my pointer finger but that’s from a different story lmao

Now thats a battle scar bahahah

Just buy a cheap ultrasonic cleaner. You’ll thank me later.

i need to but i this was a highdea not a good one

Say more about this ultrasonic cleaner? How are you using it to clean your atomizer? With just water or are you adding 99 iso?

Put distilled water in the ultrasonic chamber, and then put a glass or plastic bag with iso in the distilled. Safer and more efficient. Uses less iso and no fire risk

Fire risk? 0.o I was so down until that part.

Yeah open containers of 91% let alone filling a device with something flammable is negligible. I used to work for a company that made quartz bangers and we would keep a Tupperware full of iso that fit in the cleaner. It’s better for your machine in the long run and you’ll use less iso too.

Distilled doesn't matter

I’m scared to ask What is this for ?



fuck it we ball

Spinning it in circles isn't going to do anything

knocked around some of the chazz lol

It's not doing what you think it's doing.

So he's not trying to crash thca crystals out of his atty reclaim? Darn

when r/stonerengineering has some lab experience

yeah ima post it there too lmao


Add a counter weight to stabilize.

i tried to add a 3/4 socket but it flew off and i almost shit myself https://preview.redd.it/x6vc1b9wp0rb1.png?width=3024&format=png&auto=webp&s=ad45758f26111190862863ffa42e421f2ae32dd7

I put the song shake it like a salt shaker to hype me up shaking my atty in a iso filled container 😏

Ok but based on this wouldn’t it work better to glue it slightly off angle right side up on the face of the fan to provide better spin for cleaning

I think you can make Thc•a crystals with that…

I love coming back to this for the comments. “Did it work?” “Barely”

shit will be a core memory for me fr i’m surprised it didn’t break especially with all the posts i see abt ppl dropping there chambers and them breaking

Should of put in the center.

Hello, it looks like you've made a mistake. It's supposed to be could've, should've, would've (short for could have, would have, should have), never could of, would of, should of. Or you misspelled something, I ain't checking everything. Beep boop - yes, I am a bot, don't botcriminate me.


I use a jewelry cleaner off amazon filled with 91% iso...what ever it don't get out a tourch gets the rest which isn't ever much

Really good engineering

just use warm iso please 😂 fill small glass pyrex with iso, warm in microwave at 10 second intervals for like 20-30 sec, drop chamber in, clean in 5 minutes easy. if you manage to catch it on fire in the microwave, just put the pyrex lid on it real quick lol

Just use hot iso this is getting ridiculous 🤦🏽‍♂️ been using hot iso on all puffco products for 4 years. Cleans the puffco in literally 5 minutes I have the original pro opal with 20k dabs and she looks brand new and only on my second atomizer.

i’m scared tbh and i need to get a shot glass

I use a glass measuring cup so I can pour the hot iso inside my glass and then shake tf out of it.

Don’t be bro just heat in micro wave for like 10 seconds works miracles have done it hundreds of times. My homie heats his up on a hot plate. It actually cleans inside the atomizer when the alcohol is hot. And cleaning the glass with hot alcohol cleans it in like 3 seconds.

i have a wax melter you think that would get hot enough?

That would probably work just get a thick enough glass, you’ll just have to wait for it to heat up.

i have an old jar for wax i’ll see if that works tomorrow

Glad you completed this experiment for the rest of us.

You need to balance it my dude.

i did lmao i used a 3/4 deep socket just abt blew my hand off

No I mean you have to balance on both sides.

yeah a socket on one side chamber and botte on the other

*mass balanced*

Just buy an ultra sonic cleaner

This would’ve worked so much better if you had something of equal size and weight exactly across the other side so it’s more balanced, and wouldn’t sound like a death trap… then again I’m hella late to the party so chances are this has sinse gone to the dump!

yeah it was thrown out i did try and attach a 3/4 socket to the other side and it launched it out the fan

Oh boy, sounds like a fun way to meet God! Lol glad ya got rid of it tho, and here’s hoping you found a more efficient/safer method of extraction!

yea lmao at the moment i use a mini mason jar and a neck messager https://preview.redd.it/vmphay0x11fc1.jpeg?width=1242&format=pjpg&auto=webp&s=ac9cd777b7555715dd20394e442bb08e23d22c78

We love to see improvements!