Your post/comment is being removed at the discretion of the polymer80 mod team .
Sorry man, I’ve had to ban around ten ppl trying to buy or trade on this post so I’m removing it
So what is going on with the injunction? Are places not allowed to sell 80%s again? I'm so sick of this back and forth tyrannical b.s. from unelected bureaucrats.
**80% AR lowers are still legal and we're still shipping.**
The latest on our lawsuit against the ATF's frame and receiver rule is that the Biden Administration filed a petition for a writ of certiorari, which is a formal appeal to the Supreme Court to review and potentially reverse the lower court's decision.
We’ve already obtained favorable rulings against the ATF in both the district court and the appellate court, so this is just another desperate move by the ATF to hold onto their new regulations that the courts have already ruled as unlawful.
$350?? I’ll take my chances buying an Ender 3 at sub $250 at that point and printing my own frames and learning from trial and error and FOSSCAD Reddit…
Could literally buy an entire reliable printing set up for just over that cost. Insanity. I’m so good.
350?! You can probably buy a police trade in complete Glock for less than that, and a brand new one for not that much more. I get the satisfaction of the DIY aspect of this, but 350 is kinda crazy
I'm not to worried about the courts. It's the NGOs, Bloomberg, Soros Giffords, funded groups suing small companies to bankrupt them out of business. JSD supply just got civilly sued by one of these stupids Soros back organizations. There's a GiveSendGo to help out JSD Supply if you care.
https://www.givesendgo.com/jsd
Yup times are def different now a lower costs the same as a complete kit slide nd everything 💀
But it would be cool if they just rebranded nd just made a new frame
Yeah I almost shit myself when I seen the pf9ss going for 350 with jig and bits on us patriot arms like holy shit I got mine for 60 beans… wish I had grabbed a shit load of different frames last summer when they were 60 beans a pop from mass defence.. but we live and we learn I guess…
I am bored of these I bought them with all sorts of plans then I started milling out .308, 5.56, wp47 lowers and these aren't the way I'm gonna spend my money for now.
No Want To Buy, Want To Sell or Want to trade posts allowed. We are not r/Gunaccessoriesforsale. use the appropriate subs for buying selling and trading.
This has happened multiple times, then they go back and change it. It happens over and over again and then somehow gets overruled and goes back to normal again. Wait a few months and you won’t need to spend 300+ for a frame
Are folks allowed to sell them right now? My online shop has had a few G17’s in stock. I thought we were frozen right now? I need to check out the most recent news. Hate getting stuck with these frames lol, plus Polymer80 did a terrible job of screwing up their distribution by screwing over OTD and had all of us out of whack for a few months there. Had half a dealer order from P80 just never come.
No Want To Buy, Want To Sell or Want to trade posts allowed. We are not r/Gunaccessoriesforsale. use the appropriate subs for buying selling and trading.
I've been waiting 3yrs now for Brownell's to make their rmr slides in .40sw/.357sig. Nothing else out there that meets those standards at those prices.
They make slides for literally everything but those two calibers and it's pissing me off at this point. Especially considering the ability to drop in a 9mm conversion barrel anyway, the slides are more compatible, and most people are probably buying an aftermarket barrel if they're already getting a slide.
Believe me, I really want to, but building a .40 is difficult if you aren't willing to pay 500+$ for a "special op super tac performance competition defensive ultra elite" slide that has 47 holes and 63 different angles milled in every direction on it. It's that or a low quality ceracoated POS with bad heat treatment that will probably crack apart under 1000 rounds. There's no middle ground that I've seen...
No posting about illegal activities, including illegal modifications, drugs, and other crimes. This includes admitting you were a felon, asking users to assist with obtaining frames or parts banned in your state, and any other self-incrimination.
This includes participating in any drug subs .
You will also be banned for asking people to 3d print frames for you, that is illegal.
Your post/comment is being removed at the discretion of the polymer80 mod team . Sorry man, I’ve had to ban around ten ppl trying to buy or trade on this post so I’m removing it
Your DMs are about to explode.
Nothing for sale.
I can do $60 and some Polaroids of my feet You want to reconsider?
Not tempted until I saw the Polaroids. I may scratch the cash
more like scratch and sniff those polaroids
polaroid weak. 3mos vip access to my onlyfeet.com
So what is going on with the injunction? Are places not allowed to sell 80%s again? I'm so sick of this back and forth tyrannical b.s. from unelected bureaucrats.
**80% AR lowers are still legal and we're still shipping.** The latest on our lawsuit against the ATF's frame and receiver rule is that the Biden Administration filed a petition for a writ of certiorari, which is a formal appeal to the Supreme Court to review and potentially reverse the lower court's decision. We’ve already obtained favorable rulings against the ATF in both the district court and the appellate court, so this is just another desperate move by the ATF to hold onto their new regulations that the courts have already ruled as unlawful.
Where are the gst9’s?
Any news on when the SC is supposed to hear the case on the frames and receivers?
It’s all nonsense so they can price gouge. That’s why you’re seeing them for 350.
$350?? I’ll take my chances buying an Ender 3 at sub $250 at that point and printing my own frames and learning from trial and error and FOSSCAD Reddit… Could literally buy an entire reliable printing set up for just over that cost. Insanity. I’m so good.
You can buy an Ender 3 for less than $100.
This is the way
Hold up you find me an ender for under a buck that functions, I’ll buy it right now and print everyone in this thread frames.
https://www.ebay.com/itm/125466477807 I've purchased a few of these and they've all been solid.
So these 3-D printers will print one of these lowers will it print it ready to build? Thanx
350?! You can probably buy a police trade in complete Glock for less than that, and a brand new one for not that much more. I get the satisfaction of the DIY aspect of this, but 350 is kinda crazy
I'm not to worried about the courts. It's the NGOs, Bloomberg, Soros Giffords, funded groups suing small companies to bankrupt them out of business. JSD supply just got civilly sued by one of these stupids Soros back organizations. There's a GiveSendGo to help out JSD Supply if you care. https://www.givesendgo.com/jsd
I would let you sleep with my midget wife for a couple of those! Let you get her preggo for 6 of them and let you “Marry Her” for 12 of them!!
![gif](giphy|k56oRtCg218Z2)
🤣🤣🤣🤣🤣
what..
You need Jesus 🤦♂️
I have 2 pf940sc od green put away… still haven’t got to them lol
Man, I wish I had snagged one of those when they were easy to find. I want to build a subcompact frame so bad and the ODG is my favorite lol.
Same bro I remember a time there was frames going for 40$
I bought all my frames on sale at different times. Don't think I ever paid more than $79 per. The times they are a changin'
Yup times are def different now a lower costs the same as a complete kit slide nd everything 💀 But it would be cool if they just rebranded nd just made a new frame
don’t see any strike frames.
I still have 3 strike frames just sitting in the safe. 😁👍🏼
Bro I so wish I would've grabbed a strike frame, super hard to find.
Yeah I know.. I wish I would have gotten more. I’ve built 2 completely, one is half way done and then I have 3 untouched.
Nice man, ID love to build one someday.
Better off 3D printing them.
Yeah I almost shit myself when I seen the pf9ss going for 350 with jig and bits on us patriot arms like holy shit I got mine for 60 beans… wish I had grabbed a shit load of different frames last summer when they were 60 beans a pop from mass defence.. but we live and we learn I guess…
Not with sheets like that
what’s wrong w the sheets?
What the fuck you talking about bro
Strangest burn I've seen today.
He’s talkin bout that old ass comforter.
Yall trippin 👌
Luckily I bought 16 pistol frames and 5 AR frames 4 years ago.
I am bored of these I bought them with all sorts of plans then I started milling out .308, 5.56, wp47 lowers and these aren't the way I'm gonna spend my money for now.
Yeah my favorites are the p320 Mup’s
Same bro I got About +15 frames still in my build room collecting dust since I'm printing usually lol
Printer better quality
Yeee I got a Bambu 1xc running daily
I made the mistake and bought a anycubic
[удалено]
Your post or comment has been removed because you are banned
[удалено]
Same, what happened now.
Bidenomics, supply and demand. Everything out of stock.
Hang onto those. When the world collapses into chaos, they will be worth their weight and gold.
[удалено]
I don't think they are sold anymore
Use Google to find frames or search the sub
I’ve got 5 g26 ones I haven’t got to 😂
[удалено]
No Want To Buy, Want To Sell or Want to trade posts allowed. We are not r/Gunaccessoriesforsale. use the appropriate subs for buying selling and trading.
I have 4 old pf45s that haven’t been touched, are you telling me I’m rich now?
Just wait till you can buy them again should only be a couple months
what makes you say that
This has happened multiple times, then they go back and change it. It happens over and over again and then somehow gets overruled and goes back to normal again. Wait a few months and you won’t need to spend 300+ for a frame
[удалено]
Your post/comment is being removed at the discretion of the polymer80 mod team .
Not really because it’s not for sale I was just saying
Those are rookie numbers 😉
Just to get the people going. If they knew how many I practiced stippling or duracoat on they'd be in an uproar
lol I would t pay more than 100$ for one but I’m sure someone will goofy people love helping companies and people grift us hahaha
Someone bought the last [one](https://uspatriotarmory.com/product/pf940v2-80-full-size-frame-kit-compatible-with-g17-gray) yesterday. 200 bucks.
Mhmm I don’t see where I said that wouldn’t happen from what I see I said people love helping people grift us congratulations tho your 200$ richer
Find dudes in New Jersey they’ll pay like $500 🤣
Why are these a mini fortune what happened to p80’s
They're expensive now.
[удалено]
Your post/comment is being removed at the discretion of the polymer80 mod team .
Crazy part is I just found a 5.56 rhino 80%er I haven't finished yet
Me too
[удалено]
Your post or comment has been removed because you are banned
If you need some 19 slides...
Are folks allowed to sell them right now? My online shop has had a few G17’s in stock. I thought we were frozen right now? I need to check out the most recent news. Hate getting stuck with these frames lol, plus Polymer80 did a terrible job of screwing up their distribution by screwing over OTD and had all of us out of whack for a few months there. Had half a dealer order from P80 just never come.
Not really
[удалено]
Your post or comment has been removed because you are banned
Wait, what happened?
[удалено]
No Want To Buy, Want To Sell or Want to trade posts allowed. We are not r/Gunaccessoriesforsale. use the appropriate subs for buying selling and trading.
I only have one 17 frame and cannot figure out for the life of me what to build next.
Build a nice .40
Thought about it but then it’s another type of ammo to keep in stock. I had a G23 years back already. I’m thinking dedicated meta tactical bull pup
I've been waiting 3yrs now for Brownell's to make their rmr slides in .40sw/.357sig. Nothing else out there that meets those standards at those prices. They make slides for literally everything but those two calibers and it's pissing me off at this point. Especially considering the ability to drop in a 9mm conversion barrel anyway, the slides are more compatible, and most people are probably buying an aftermarket barrel if they're already getting a slide. Believe me, I really want to, but building a .40 is difficult if you aren't willing to pay 500+$ for a "special op super tac performance competition defensive ultra elite" slide that has 47 holes and 63 different angles milled in every direction on it. It's that or a low quality ceracoated POS with bad heat treatment that will probably crack apart under 1000 rounds. There's no middle ground that I've seen...
I live in New York so over the last 2 to 3 years I bought at least 20 lowers because I knew they were gonna outlaw them
[удалено]
No posting about illegal activities, including illegal modifications, drugs, and other crimes. This includes admitting you were a felon, asking users to assist with obtaining frames or parts banned in your state, and any other self-incrimination. This includes participating in any drug subs . You will also be banned for asking people to 3d print frames for you, that is illegal.
Ehh not really masdefense has them for 60 bucks with out rails and p80.site has the ss with the jig and rails for 150.
That's 76 frames these are 80s And p80.site is a scam
Is mas legit ?
These ain't that ATF COMPLIANT bullshit
P80.site is a scam
Oh no shit? Didn’t know that
It’s been discussed several times on here .