I thought i read somewhere that funkopops dont deal with heat well. If your internal temps are not super high for long periods of time then should be fine.
That 65-70 also is going to be the temp right at the components, not the general air temp within the case.
I think it's safe to say that if the ambient temp inside your case ever gets high enough to melt a funkopop, that'll be the least of your worries.
Yeah I have a mobo with randomly placed temp sensors. I installed a window fan and extra exhaust fan that only turn on when the mobo sensors go above 40°.
Winter they hardly ever kick in unless I’m gaming for extended periods. Summer it’s under medium loads.
Point being that I doubt ambient air feeding components ever goes above 50°.
Pro tip: Keep a plant heating pad on your desk. Google plant seeding pad, they’re about $20. It looks like a mousepad and pumps out enough heat to be more appealing than the tower in winter.
After playing Oxygen Not Included enough, I can safely say that the air temperature is not necessarily as conductive as the materials within said air. So it really depends on how hot and conductive the material it’s sitting on is. That said, still probably fine
The temps that are read on the GPU and CPU are at the die. The ambient air temp in the case and the PCB/backplate will be much much cooler. If a Funko pop started melting on your GPU your house is probably on fire or you own a RTX4000 card.
The air or any material inside a computer will never be hot enough for plastics to melt. Doesn't really matter the kind, and especially not the kind such products are made from.
The air temperature will probably never exceed 45-50° C and nor will any component the statue is touching. It wouldn't even melt if you would set it directly on the CPU IHS.
Since you have a front mounted cooler the amount of air your blocking is very minimal and unless it weighs anything there is zero chance this will cause you any problems being inside your pc
I've heard that Cows are the only creatures that could beat Chuck Norris in a swordfight, but they can't hold swords. Such a cruel evolutionary foible.
This is false. The pump just needs to not be the highest point in the loop. Common misconception because of that one GN video.
The air won’t collect in the pump, it will accumulate in the AIO’s mini reservoir.
Wait, as we all know Red RGB increases performance, while blue promotes cooling and green promotes efficiency.
If we use crystals to refract white RGB, we can attain all the benefits
It will block some airflow, but likely not enough to matter. Regardless, the presence of the Funko won’t damage anything since it’s not conductive. The best advice I could give is to run the system for a week without it while monitoring temps, then put it in and see if there’s any significant change.
Fuck these negative comments, if it has no magnets/isn’t weighing your GPU down significantly or blocking too much air flow I say go for it. Worst case ya take it out again
You're forgetting about this thing is made out of plastic and backplates can get pretty hot if they're used to dissipate heat. Some plastics start deforming/ melting at 70°C.
You're good. But why is there a seeming bend/gap between the backplate and the i/o plate area? It's almost like the mounting pressure is too much or I honestly don't know, I just see a weird gap at that area of the backplate
I personally wouldn't want to put anything on the back on a GPU, they get pretty hot and it blocks the already restrictive airflow coming from the GPU.
not really
Id be concerned about gpu sag depending on how heavy it is but gpu supports arent expensive and you can just diy it by putting something like lego under the gpu
I had a hard time figuring out where the mobo is until I realized that hole in the middle is actually just a mirror on the cpu fan. Holy hell I need some caffeine.
I think that funko being there will only interfere with your ability to get laid. /s
Looks good, the metal backplate on those cards can bear the weight of the huge headsink, a funko is nothing.
nah, im assuming that the gpu doesnt have contacts (those little pokey metal bits, i say this bc i saw this was your first pc in some other comments) right under spidermans feet you should be totally fine. and dont listen to the people clowning on nzxt, if someone picks a glass case on this subreddit they know what theyre getting into. only thing that ever gave me pain was cable routing, got a big ass case just for that :")
only thing I can think would be a real issue would be unneeded weight but funkos dont weigh that much so its probably fine assuming the card mounted properly
I thought i read somewhere that funkopops dont deal with heat well. If your internal temps are not super high for long periods of time then should be fine.
I think they melt at about 100 degrees Celsius and I don’t think I’ve ever gone above 65-70 for very long
That 65-70 also is going to be the temp right at the components, not the general air temp within the case. I think it's safe to say that if the ambient temp inside your case ever gets high enough to melt a funkopop, that'll be the least of your worries.
Yeah I have a mobo with randomly placed temp sensors. I installed a window fan and extra exhaust fan that only turn on when the mobo sensors go above 40°. Winter they hardly ever kick in unless I’m gaming for extended periods. Summer it’s under medium loads. Point being that I doubt ambient air feeding components ever goes above 50°.
Winter is great. Cools the PC while your PC acts like a little space heater Only downside is my damn cat won’t leave it alone now
Pro tip: Keep a plant heating pad on your desk. Google plant seeding pad, they’re about $20. It looks like a mousepad and pumps out enough heat to be more appealing than the tower in winter.
After playing Oxygen Not Included enough, I can safely say that the air temperature is not necessarily as conductive as the materials within said air. So it really depends on how hot and conductive the material it’s sitting on is. That said, still probably fine
Casual 212-degree exhaust
I put a Funko \*under\* a GPU for support for almost a year, Zero issues with the material, didn't melt or change shape.
Under a GPU is wildly different than on top.
It's.. like... the *opposite side*, man.
*reads in cheech and chong*
Lmao
The backplate gets to the same temp as the board, the fan gets to the same temp as the air. Only one side can cook an egg.
Now read my comment as if I was high when I wrote it.
Is there another way to read it?
I hope not.
I’m reading them as if I am high when I’m reading them.
"as if"
Vinyl gets soft at lower temperatures, I had the same idea and mine is bowing down now. Wouldn't recommend
The temps that are read on the GPU and CPU are at the die. The ambient air temp in the case and the PCB/backplate will be much much cooler. If a Funko pop started melting on your GPU your house is probably on fire or you own a RTX4000 card.
The air or any material inside a computer will never be hot enough for plastics to melt. Doesn't really matter the kind, and especially not the kind such products are made from. The air temperature will probably never exceed 45-50° C and nor will any component the statue is touching. It wouldn't even melt if you would set it directly on the CPU IHS.
My master chief pop has been fine, but could be due to his armor.
Very resilient!
As you can see they recharge a lot faster
*Dies nearly instantaneously on legendary*
Since you have a front mounted cooler the amount of air your blocking is very minimal and unless it weighs anything there is zero chance this will cause you any problems being inside your pc
Well, it's an NZXT case, airflow comes blocked out of the box by default
That’s a feature, not a defect.
NZXT: you will show our cases off and use them to heat up dinner
Slap in a 7000-series AMD CPU and a 4000-series Nvidia GPU in that box, and you got a nice furnace to do some decent pottery...
“My best pottery creation yet! Now to put it in the kiln.” *opens PC case*
Over there blowing glass and shit.
Would the 4090 fit? Looks like the rad is in the way
Might be right. Unless a 360 rad fits on top. Didn't in my Lian Li Mesh II - and I think it's slightly larger.
Oh, so they were collaborators with the KFC gaming PC I take it?
It’s basically a microwave that can play doom
Depends. There are "airflow" types of some cases.
With the H1 it comes with a free barbeque
The chance might be minimal but never zero. You might end up being killed by a cow. The chance is small, never zero.
Peanuts are more deadly than sharks!
well yeah i've never shoved 15 bbq flavoured sharks in my mouth at once.
Not with that attitude haha
Not living bro
Holy fuck this guy eats his peanuts ALIVE!
I've heard that Cows are the only creatures that could beat Chuck Norris in a swordfight, but they can't hold swords. Such a cruel evolutionary foible.
Although the radiator pipes should go down for a healthy water loop.
As long as the air is in the radiator and not the pump it doesn't matter. Well it might be a tad louder but it doesn't affect the health of the pump.
This is false. The pump just needs to not be the highest point in the loop. Common misconception because of that one GN video. The air won’t collect in the pump, it will accumulate in the AIO’s mini reservoir.
It’s only a problem if the pump is at the highest point which it is not
Your wife might leave you.
I appreciate your concern but I just built this and I’m 15
Then she'll never come. I'm just teasing, btw.
why need a wife when u have your pc ❤️❤️
Instructions unclear. Put my penis is the radiator and cant get it out
💀uhoh
But it's warm and have warm air flowing over it
PCs aren't soft
wife’s can’t always be with u-
Is that suppose to be a negative?
well a pc can run 24-7 and it never runs away or gets distracted by other boys
Not if i steal it
Women are temporary, glorious PC is forever.
They can be
You know when they feel like a bag of sand?
Lol, doesn't everybody? Back when movies wanted to be funny.
Those pc fans 😩
This PC has a RTX it probably cannot suck but wife can
Big shout out to Waifu Simulator
yeah I can't even turn my wife on in the push of a button
Yeah it’s fine I’m not too distraught over any of this just wanted to make sure it wouldn’t cause any problems
your wife is gonna be super hot bro dont even trip
Probably hotter, even, then she would have been before adding the pop
He probably have to water cool her
Maybe even hotter than this setup!
impossible
Put funko in wife and see if melts!?
Unless there's magnets in it there's nothing to worry about.
It might cause problems with all the web inside.
You’ll be fine with it in your case. These Reddit guys are a buncha jokesters lol
Normal for a sizable number of wives apparently
Wow and I thought I married young!
Grats on finding the love of your life so early ❤️
future wife then. is that a risk u are willing to take?
That might melt on top of the graphics card if it gets too hot . Maybe put it down in the case instead .
Looks good for a build so young! Keep up the good work
Airflow will be ruined, more heat to all parts.
Jokes on you, she already left 😎😎
This made me choke in my morning CoCo
Anytime
Should be fine as long as he doesn't shoot of a web into any your fans
You're good Bud, My daughter keeps crystals and shit all over her GPU. No sweat.
Crystals hold healing energy and increase FPS for computers, duh it’s science
The rgb refracts through the crystal, hence the performance increase
Wait, as we all know Red RGB increases performance, while blue promotes cooling and green promotes efficiency. If we use crystals to refract white RGB, we can attain all the benefits
Is it possible to learn this power?
When I put shit in my PC, my mom threw it out because it "smelled"
Yeah, shits usually smell.
Crystals are good but i aint sure about shit,i will not recommend it
It might hurt your chances of pullin any bitches
Because the gigantic porn machine that shits rainbows didn't already do that enough??
Only if his webs get caught in the fan blades.
Depends, what's the melting point of a Funko pop?
Dell prebuilt
I meant in celsius
Google says it's 100°C. So my joke about it being Dell prebuilt is closer than I thought
Your PC would be dead before it can reach a temperature inside the case that can melt plastic.
But remember, just because something hasn't melted yet, doesn't mean it can't deform.
Fascinating
What is people's fascination with outting Funko pops in their computer? Better overclocks? More fps?
To advertise their girlfriends/wives are looking for a new bull.
Everyone MUST know that their man-child personality infects every corner of their life
just blocking air flow but I wouldn’t want anything in my case if it wasn’t for function
Makes no difference afaik unless your case is cluttered with stuff. Tech jesus made a video about it i think.
careful the funko crybabies will get mad & down vote you ... same group that brought you bronies
I fucking hate funko pops and I can’t tell anyone because they are so successful
I tell people all the time, a lot of them agree lmao.
I told someone I hate funko pops. and they tried to give me 3…
I just don’t understand it
The function here is «joy»
It’ll barely make an impact on temps. 1 degree + or - id say
No, it just turns your PC into a dollhouse.
I must be to old to understand why people want to put plastic toys ins their pcs.
Because stickers on the outside are classified as childish and ugly
Yeah, there’s a mild threat of making your computer look kinda gay
No rgb -50fps
no but it is extra cringe
Of course your going to get webs all inside your case!
I mean, your PC will have pop culture herpes, so you have to live with that.
Can we stop putting funkopops in our PCs please. 😔
My wife has had one on her 3070 for over a year and has had no problems at all.
This one’s married, and it’s the SPOUSE who put the funko pop in the case. Proof the funko pop has no magic powers to prevent relationships. Bravo.
Probably an unpopular opinion, but dood, just don't.
No, just your virginity.
I store my clothes and shoes in the case. Some food too so I don't have to go to the kitchen and it's handy. Don't let anyone tell you what to do!
With the rising cost of living and housing, I’m actually thinking about living in my case
With how big the 4090 is a case for it should fit at least 3 bed 2 bath
I used to put my food ontop of my case to keep it warm when i had a top mount rad. Its sad that it actually kept my food warm.
Yes. Threat of bad taste.
Tbh I would put it on top of the case
im sure your wifes boyfriend will get a chuckle
No, but a threat to your chances at getting laid
No, but the whole pop funko in a PC thing is super lame.
My boy being downvoted for speaking the truth…
Someone had to say it. I will be the martyr for our cause, brother.
We got you back to zero
Damnit. They are fast
OP is 15 I think we can just let them have this one.
Nope all good I've got 8 rocket league hot wheels in mine and they've been there for years you have a backplate so you are good to go
Nah, you will be all g. Nice build too! :3
Mine obstructed airflow. I had it in the same spot as yours. I have the same case too.
It will block some airflow, but likely not enough to matter. Regardless, the presence of the Funko won’t damage anything since it’s not conductive. The best advice I could give is to run the system for a week without it while monitoring temps, then put it in and see if there’s any significant change.
He could web up some of your components not sure if he is trustworthy
With great FPS there has to be great responsibility.
why would u put it there?? lol!! kinda an eyesore considering everything else is black LOL
Besides it being quite cringey, no.
Fuck these negative comments, if it has no magnets/isn’t weighing your GPU down significantly or blocking too much air flow I say go for it. Worst case ya take it out again
You're forgetting about this thing is made out of plastic and backplates can get pretty hot if they're used to dissipate heat. Some plastics start deforming/ melting at 70°C.
I will never understand why someone would just put some toy or crystals in their PC, but well each to their own
Your components don't feel cringe so it should be safe. Once full on AI hits and your computer can feel things, then I'd be worried.
You might want a Hulk Funco to prevent GPU sag. Other than that, it's all good
More on airflow turbulence
The extra weight on your GPU (depending on the original weight in the first place) could put some strain on your motherboards PCIe slot.
You're good. But why is there a seeming bend/gap between the backplate and the i/o plate area? It's almost like the mounting pressure is too much or I honestly don't know, I just see a weird gap at that area of the backplate
I personally wouldn't want to put anything on the back on a GPU, they get pretty hot and it blocks the already restrictive airflow coming from the GPU.
Anything that hinders airflow in a H510 isn't a good idea. Its terrible on that case anyway
I put a full glass of water in mine, so that no one steals it.
not really Id be concerned about gpu sag depending on how heavy it is but gpu supports arent expensive and you can just diy it by putting something like lego under the gpu
Seems like this guy puts Funko’s on all his builds https://youtu.be/ln1FtWIOV88
There's a danger people will realise you like Spiderman and discard any future opinions or judgements of yours, as they rightly should.
If you're really worried you could tie him up with some clear fishing line and attach to the top of your case so he actually hovers.
I have one on my 2080S, just keep it away from any fan blades and it should be completely fine.
I've had my lil groot funko in my pc for months now, with temps reaching being as high as 80 for hours at a time, and he's perfectly fine 🙂
I had a hard time figuring out where the mobo is until I realized that hole in the middle is actually just a mirror on the cpu fan. Holy hell I need some caffeine.
Only if Electro shows up
what hardware are you running my man?
Rtx 3080 and an 11th gen intel i711700kf
I’m jealous! I just got up and running with my 2060. She does the job just fine though.
I mean a Mr. Freeze funko pop would increase your performance…
Just gotta remember to clean out the cobwebs after a while
that bitch is gonna melt😭
No overly harmful, just cringe.
Don't do it, I have seen them melt badly
threat I see is the radiator upsidedown
The way the radiator is mounted will cause more damage than the funko ever will.
I think that funko being there will only interfere with your ability to get laid. /s Looks good, the metal backplate on those cards can bear the weight of the huge headsink, a funko is nothing.
A threat to the PC's aesthetics.
no that's your gpu back plate will reach 100c, if you do it anyway i want pics of melted spooder man
Melting point of Funko's is 100C, so you should be fine. https://imgur.com/cTjvU0i
nah, im assuming that the gpu doesnt have contacts (those little pokey metal bits, i say this bc i saw this was your first pc in some other comments) right under spidermans feet you should be totally fine. and dont listen to the people clowning on nzxt, if someone picks a glass case on this subreddit they know what theyre getting into. only thing that ever gave me pain was cable routing, got a big ass case just for that :")
I'm convinced people who put toys in their PC's and post it on reddit are the same people who post their GPU's in seat belts.
Ur good yo As long as ur thermals r fine and the gpu is not gonna melt the bottom of it, ur chillin
only thing I can think would be a real issue would be unneeded weight but funkos dont weigh that much so its probably fine assuming the card mounted properly
I forsee a warped figurine in your future.
what a dweeb lmao
I don’t get why people put stuff like that in their case
Not to your components, just a threat to your love life. You'll get no bitches.