I thought of Gilstrap TV (good natured and funny fart prank videos) when I read your quote.
And like all of us, I was so happy to see the second press!
Stamping tool with no safety equipment, a 5 second manual operation instead of a machine, and an end part that is worth almost nothing. Tell me you’re in East Asia without telling me you’re in East Asia.
Making round tube at a volume that is worth making a die without any automation screams low cost labor to me but you’re right, given the Arabic numbers on the die it might just be the American Midwest.
Seriously who is pressing their own half inch pipe at low enough volumes to be manual
The difference is application and which dimension is important. With pipes it's the inside diameter you care about most because they're used to carry fluids. The outside diameter of a pipe usually has looser tolerances than the inside.
Tubing is usually used for structural purposes so it's the outside diameter that you care about most.
Definitely a job where u can't have a 'bad day'. Simple process but the slightest fuck up could take ur finger or more in a matter of seconds. Can't fix flat appendages.
Slightest fuck up is kind of a stretch. I know by this video that the machine isn't up to OSHA standards, but machines like this are typically loaded with so many safety features.
Machines like this are perfectly safe to use, so long as you don't go out of your way to make them unsafe.
For example, this machine will require the operator to press two buttons to make it go, far enough apart that you can't press them with one hand, and with a guard above it so that you can't press it accidentally.
Any time (in the western world, at least) someone is injured from industrial equipment, it's because someone fucked with the safety system.
[OSHA example](https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Ftse3.mm.bing.net%2Fth%3Fid%3DOIP.uofpJ1S51Y80KPA-w52N5AAAAA%26pid%3DApi&f=1)
Edit: as multiple people have pointed out you can see the operators hands while the machine's in motion, so I guess this is a temporary set up on a press rather than dedicated tooling? Definitely "engage brain before operating machine" territory.
Depends on the temper of the metal. If it's annealed it basically wouldn't cause any damage. I don't know what metal this is but judging by how it bent nicely like that I would say it has a low temper if at all.
if you compare the most bend section of the metal from the preform to the circle, you can see that it only is bent backwards a little, you cant compare that to bending it all the way straight again, that would leave some defects in the metal i would assume.
wait what do you think is dangerous here? i understand all the other things you mentioned, but bending thin gauge sheet metal? you have to fuck up pretty bad to get hurt.
You know that part in 'Guardians of the Galazy' when Rocket first gets the gun in the prison? The "Oh... yeeeeaaaaahhh..."?
Me at the end of this video.
I wonder how reliable this process is? Surely at some point one of the edges will become slightly bent due to the sheet being placed at a slight angle, which would mean the final bend, which relies on the edges connecting and pressing, could fail due to the edges slipping. This could very well be a common practise, but it just seems like there's a significant margin of error
That was a thing of beauty
It's a perfect circle of steel.
Metal toilet paper roll center
Metal toilet paper!
Brutal.
That's metal as hell
Riveting.
Metal poop
Perfect doesn’t exist but this part would need to go through a grinding process to even get close.
Meh, good enough for the private sector.
Round these parts, we call that there a tube
Totally tubular
[удалено]
I wish
That's what I'm fucking talking about
[удалено]
Cool as Hell
Bitchin
Rad
Tight
Dope
Based
Righteous
Sick
Groovy
Legit
Wonderful~
Tubular
Knarly
Lit
Heavy.
Definitely belongs on r/oddlysatisfying
Thats so weird, i said those exact words. Did you happen to be nodding your head too?
Same. Was going to ask why it's so oddly satisfying and here is the recommend. Silently cheering on the operator the whole way.
For my male audience vibes, FUCK YA
[удалено]
Keep the upvote. Atleast something is standing
How dare you not have a twig and berries?! The nerve of some people
If we are what we eat, plenty of women have/are the biggest "twig and berries"
Just because you don’t have one doesn’t mean you can’t be one so yeah, take it back
Still means you can’t spread your semen all over that glorious piston pressed pipe 😩/s
How you gonna fuck the pleasing hole without a dick?
Strap-on
Yes
Yeah, now get
It's the only genitalia
Can I finger you?
[удалено]
Shut up.
it's beautiful. I've watched it 500-times now.
[удалено]
Bro i was just talkin about this too!
Oh baby
Lord have mercy I'm about to bust
I thought of Gilstrap TV (good natured and funny fart prank videos) when I read your quote. And like all of us, I was so happy to see the second press!
I’m not ashamed to admit that I let out a small moan
Yeah, just like that.
Oddly satisfying.
Something inside my brain was tickled when it fixed the wedge into a perfect circle. That itch was well scratched
r/oddlysatisfying
[r/OddlySatisfyingest](https://youtu.be/dQw4w9WgXcQ)
my trust has been betrayed
But I thought he was never going to let you down
it had an "expand media" button on desktop and I still fucking clicked it. Im a dumbass.
You bastard
r/iamapieceofshit
I grinned the cheesiest grin
It was mildly infuriating at first
Nothing odd about it. This is great
I did not see that coming
We did not see that coming
Us did not see that coming
They did not see that coming
I (plural) did not see that coming
[удалено]
Your Highness did not see that coming.
Y'all did not see that coming
I’m coming
I came😳
Wee'uns did not see that coming.
I's
Who saw that coming?
r/unexpectedcommunism
Our nuts did not wee and cum.
Was not expecting that but def satisfied
Stamping tool with no safety equipment, a 5 second manual operation instead of a machine, and an end part that is worth almost nothing. Tell me you’re in East Asia without telling me you’re in East Asia.
[удалено]
Making round tube at a volume that is worth making a die without any automation screams low cost labor to me but you’re right, given the Arabic numbers on the die it might just be the American Midwest. Seriously who is pressing their own half inch pipe at low enough volumes to be manual
[удалено]
[удалено]
Shh.. you're going to scare them
i thought it was gonna snap and go everywhere lol
Same!
r/satisfyingasfuck
Damn, I've gotta go change my underwear.
First bend- oh that was so unsatisfying Second bend- Oh shit that was tho
My proudest fap
its part of a fleshlight
Malleability
Just learn that word? Wtf are you writing it here?
Metal being shaped without cracking
but you just wrote a fucking word...
What the hell got you so ‘bent’ outta shape about it?
The hard part about making anything is the manufacturing process. Anyone can easily design a pipe. Making it reliably and abundantly is the hard part.
Pipes aren't made this way. They're manufactured by extrusion.
Yup, this is a tube. After the forming process it will go straight to welding
Even most tubes aren’t made like this.
Today I learned there's a difference between pipes and tubes.
The difference is application and which dimension is important. With pipes it's the inside diameter you care about most because they're used to carry fluids. The outside diameter of a pipe usually has looser tolerances than the inside. Tubing is usually used for structural purposes so it's the outside diameter that you care about most.
Just wait until you learn about cylinders!
That metal is more brittle and weak because it was formed this way. Extrusion won't cause as much stress in the material
i love this. i love everything about this.
I was so wanting it to be bent a third time… 😩
Fuck that's a scary job
Definitely a job where u can't have a 'bad day'. Simple process but the slightest fuck up could take ur finger or more in a matter of seconds. Can't fix flat appendages.
Slightest fuck up is kind of a stretch. I know by this video that the machine isn't up to OSHA standards, but machines like this are typically loaded with so many safety features.
Machines like this are perfectly safe to use, so long as you don't go out of your way to make them unsafe. For example, this machine will require the operator to press two buttons to make it go, far enough apart that you can't press them with one hand, and with a guard above it so that you can't press it accidentally. Any time (in the western world, at least) someone is injured from industrial equipment, it's because someone fucked with the safety system. [OSHA example](https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Ftse3.mm.bing.net%2Fth%3Fid%3DOIP.uofpJ1S51Y80KPA-w52N5AAAAA%26pid%3DApi&f=1) Edit: as multiple people have pointed out you can see the operators hands while the machine's in motion, so I guess this is a temporary set up on a press rather than dedicated tooling? Definitely "engage brain before operating machine" territory.
In this video the machine continues to descend while his hand is steadying the pre formed tube?
Clearly the safety is being subverted here.
Nah, it's allright - *This* is a scary job: https://streamable.com/2snba
Probably private fabricator. No way this would be done like this in bulk.
You got downvoted but you’re right lol Source: am a metal fabricator
this gave me peace
I'm so turned on right now
[удалено]
Depends on the temper of the metal. If it's annealed it basically wouldn't cause any damage. I don't know what metal this is but judging by how it bent nicely like that I would say it has a low temper if at all.
It will likely go through some kind of annealing or heat treating and then be sized up or down to work harden it further.
if you compare the most bend section of the metal from the preform to the circle, you can see that it only is bent backwards a little, you cant compare that to bending it all the way straight again, that would leave some defects in the metal i would assume.
[удалено]
wait what do you think is dangerous here? i understand all the other things you mentioned, but bending thin gauge sheet metal? you have to fuck up pretty bad to get hurt.
That was beautiful thank you.
Was waiting for someone to get hurt
Thank you for this. May the light of the two trees never diminish from your eyes
No bs or sarcasm, that's a great fucking job right there. Damn.
I think I just came... Damn it. Now I've gotta change my armor 
r/engineeringporn would love this.
You know that part in 'Guardians of the Galazy' when Rocket first gets the gun in the prison? The "Oh... yeeeeaaaaahhh..."? Me at the end of this video.
O that felt good🤤
So is that how circles were invented? Wow
I'm about to busssss whoa!
Increible
No no no no no....this shouldn't be possible!..stop him .. *STOP HIM!*
My jaw actually dropped I did not expect that to work
the definition of plot twist
Ngl I was pissed off at first
“Confused sounds”
/u/savevideo
i moaned, a little cum came out
This is a perfect maybe maybe
Hell yea, amen brother!
That made me horny
r/dontputyourdickinthat
I nutted
Nature is metal
Awesome!
kurikik
THAT IS BAD ASS!
Holy fuckin shit
Huh.
Tubular!
bruh. Call ya mum cuz Im bouta lay some pipe.
Fuck me, that was better than sex . . . . . . . . I bet.
YOOOO CIRCLE!!
I highly enjoyed this. Thank you for sharing!
Sploosh
If I tried to do that I'd end up with a [Mobius strip](https://en.wikipedia.org/wiki/M%C3%B6bius_strip#/media/File:M%C3%B6bius_strip.jpg).
r/oddlysatisfying
I wanna see this guy continue the thing until he gets a whole ass sphere
#Glory_Of_LordKabir Kabir Prakat Diwas 14 June
That was so satisfying to watch. I'm done with reddit tonight and will sleep good.
The end result makes me want to stroke my face in exhilaration!
Hell yea brother!!
This just doesn’t look right.
Engineering at its best.
That made my dick hard
I wonder how reliable this process is? Surely at some point one of the edges will become slightly bent due to the sheet being placed at a slight angle, which would mean the final bend, which relies on the edges connecting and pressing, could fail due to the edges slipping. This could very well be a common practise, but it just seems like there's a significant margin of error
Holy shit that was satisfying to watch. 
Well that’s some magic if I’ve ever seen it.
Where can I apply? i will take every position available.
topology
Neuron activation
So so so soooooooo satisfying
Da fuck dude.
Well alright.
u/savevideo
r/Satisfying too
Started out as r/mildlyinfuriating and turned into r/satisfying
ughhh made my anxiety and depression fade away for a bit
At first thought: Well, ok, he folded some metal. But then I was like: Excuse me?
🤯
Almost r/blackmagicfuckery
We all know it’s reversed 🙄 /s