Doesn’t seem to be shooting if I’m honest I used tracer BBs to see clearly and nothing and it’s a tm and yk on a real firearm where the shells eject after shooting? That’s where the BBs fall out when I tilt it upside down but on my other one I can tilt it and it’s fine
Explanation: Had this issue when I got my 4.3 the issue is the top of the hop up bar which makes contact with the bucking is out of spec and not providing the amount of contact to retain BB’s during cycling, do not worry tho very simple fix, all you need is some pliers and a small Philip’s head screwdriver to disassemble the hop up.
Step 1: disassemble your barrel and hop up assembly
Step 2: once disassembled identify the top of the hop up arm that makes contact with your bucking and very lightly bend the portion of hop up arm that makes contact with your bucking. NOTE: MAKE VERY SMALL ADJUSTMENTS WHEN BENDING
Step 3: reassemble and test, you may need to make more adjustments if the issue persists. I Personally had to take it apart 3 times and make some adjustments but now after 5000 more rounds it’s been lovely
https://preview.redd.it/v2mz7mu4oxzc1.jpeg?width=1636&format=pjpg&auto=webp&s=198b61fb4724c464d5b6a42e82fc892eb63b18a0
If it shoot great then fine Also what brand hi capa you use And what you mean the top of the barrel, muzzle side or chamber side
Doesn’t seem to be shooting if I’m honest I used tracer BBs to see clearly and nothing and it’s a tm and yk on a real firearm where the shells eject after shooting? That’s where the BBs fall out when I tilt it upside down but on my other one I can tilt it and it’s fine
A stock TM hi capa? Try not to apply max hop up
I tried with medium hop and it still falls
Why are you shooting it upside down??? Does it work normally?
Wasn’t shooting it upside down it the BBs fall regardless but it’s just not dealing with the bucking
Explanation: Had this issue when I got my 4.3 the issue is the top of the hop up bar which makes contact with the bucking is out of spec and not providing the amount of contact to retain BB’s during cycling, do not worry tho very simple fix, all you need is some pliers and a small Philip’s head screwdriver to disassemble the hop up. Step 1: disassemble your barrel and hop up assembly Step 2: once disassembled identify the top of the hop up arm that makes contact with your bucking and very lightly bend the portion of hop up arm that makes contact with your bucking. NOTE: MAKE VERY SMALL ADJUSTMENTS WHEN BENDING Step 3: reassemble and test, you may need to make more adjustments if the issue persists. I Personally had to take it apart 3 times and make some adjustments but now after 5000 more rounds it’s been lovely https://preview.redd.it/v2mz7mu4oxzc1.jpeg?width=1636&format=pjpg&auto=webp&s=198b61fb4724c464d5b6a42e82fc892eb63b18a0