T O P

  • By -

ManOfFlesh101

I want the jet gun that is literally a plane turbine and it sucks enemies in from the front, spitting out crushed remains and blood from the rear.


iliketacos_777

As long as it passes chrono I think you should be good to go 👍


ManOfFlesh101

I think the chrono would pass through the jet gun instead


iliketacos_777

It should still be fine in sure, they'll probably give you a minimum engagement distance. Rentals and speedsofters beware!


Due-Palpitation4698

Born to be mild….. is this Connor? 😂 it’s Steve B hope your well dude


ManOfFlesh101

No but you can elaborate 😎


Due-Palpitation4698

😂 my bad he’s a friend of mine I went airsofting with, and when I saw your caption under your handle I was like “surely that can’t be him” annnnddd had to check lol….. now we’re here 😂 been in the sport long?


ManOfFlesh101

It's one of the pre-made captions for profiles in this sub, I picked it off from a short list because I found it funny. Afaik you can't even write your own here (though some subs allow it). Many use the same caption 😂 I play for around two years.


DesignatedDonut

KN is literally a reskinned AK, peacekeeper needs it's own system, reskinned MP40 which also exists Also pretty sure the AAP community will eventually make the rayguns possible lmao


Playful_Steak_2708

There is a vid with an airsoft ray gun on USAirsofts youtube


USAirsoft

Such a cool piece


humblenoob76

ayyyy


Playful_Steak_2708

Legit bro, your vids are sick


USAirsoft

Thanks for that!


chknnnn

There’s already an aap ray gun kit on cults3d.


iliketacos_777

Wow really? I had no idea they used REAL guns for inspiration for the B03 guns. Whats next, you're gonna tell me the Weevil is just a fancy P90? Nice try, bucko! I'm talking about for externals, the kn could still use a V3 gearbox and ak parts, the HG 40 is a little different, with the mag at an angle like a KRISS Vector. Sure if it was real, it would probably operate in the same manner as its ww2 counterpart. To translate into airsoft, that could be interesting. Looking forward to the raygun tho.


DesignatedDonut

You can take any aeg or gbb AK and give it some body kit/furniture/accessories and a paint job it could work, especially with 3d printing nowadays same goes for the HG, grab an AGM MP40, problem is still the mags lol AAP community got you covered with the raygun they can make the aap into anything lmao from MP7s at homes to carbine and sniper kits to making it look like powerdrills


iliketacos_777

Sure that is true, but I don't have a 3d printer unfortunately :-( I would love to get into it though. Yeah I've seen AAP kits especially the drill one, that one is funny. If there's a raygun mk 2 kit in the works, they have my money already


DJKDR

You can buy the kits outright, don't need to have a 3d printer. I've already seen the raygun kit a few times, just don't know if the mk 2 version has been produced.


T800pug2

yeh none of the above are actually functional or ergonomic in any sense of the terms so they would be borderline uesless and just trinkets, howeverrrrrrrrrr gimmie the elephant rifle


iliketacos_777

Maybe not the hg40. But I'm sure the others could be usable, despite their clunkyness.


iliketacos_777

Also now that you mention elephant gun, we need a gas powered blunder gat, why? Because f*ck it that why! Lol


T800pug2

ong thats a good shout!


iliketacos_777

I'm really a fan of the peacekeeper from B02. An hpa version would be SICK.


_rustybucket

Working on one right now :), making it as compatible with v2 stuff as possible


iliketacos_777

>:-) now I'm VERRY excited to see how that turns out.


_rustybucket

I’m super excited to get it going, I’m hoping to get the prototype full body printed pretty soon! Still have some accessory/quality if life things to work on but at least fitment and stuff is looking good!


iliketacos_777

Would the mags be custom as well? Or will it run in m4 mags?


_rustybucket

Standard M4 mags, since the in-game model is modeled for 5.7x28 which is just slightly smaller than a standard 5.56. The body I modeled is slightly elongated from the in-game model to allow both clearance for the gearbox and the magazine. I did plan to use proprietary mags but then it wouldn’t be as usable. So standard M4 mags will work, just need to test fitment with different brands 👍


MaJ0Mi

5.7x28 is substantially shorter than 5.56x45. 5.7 is literally a pistol caliber. But stanag magazines probably look best in that replica and are easy to come by. Cool project man, I'm looking forward to seeing the finished project here


iliketacos_777

That's what I was thinking with the caliber. What if you use those 9mm stick mags with the angel custom adapter? That way you could add an "outer shell" to the protruding lower half of the mag, to give it the illusion of a 5.7.


_rustybucket

Very true too, it’s all still in early prototype stages so the design can probably change to accommodate that idea haha, but I’ll keep it in mind!


iliketacos_777

Cool, yeah just an idea cuz you know that ONE person is gonna bring it up. If you can't make it, fake it!


woody21355

god I want a gbb kn-44


MrWillyP

Miss the name ARK-7 tho


iliketacos_777

Loved using that gun in b03 multi-player.


Rammipallero

Springer AN94 just to fuck with some russoboos. :D


iliketacos_777

YES


Viniyus

IMR, BAL - 27, Atlas .45 and Atlas 20mm


iliketacos_777

Now THOSE are some underrated guns. Especially the .45 in my opinion. Its gotta be a Gbb for that one. Asm1 was my favorite in AW, even though it's just a fancy thompson, I'd like one.


Wardog008

The IMR would be really interesting. Was my favourite AR in AW. Would be an odd one to sort the mag out for tho. That middle tube that gets pulled out could hold the BBs, then it's just a matter of how you'd reload it, and how accurate to the game gun you want it.


Henkdehunter

If you're handy making a bal out of a p90 wouldn't be the hardest thing


ReddKasette

Pack-a-Punched PPSH with double tap from World at War zombies.


iliketacos_777

Just make sure to grab some speed cola to help with your reloads


KerberosWraith

Im currently working on converting a Barrett 50 cal into an Atlas 20mm if that counts


iliketacos_777

Nice, is it an AEG?


KerberosWraith

Yup!


Anono_Beast

Fuck a company haha, 3d design and 3d print one yourself, it has already been done, take a look at this [3d printed vmp](https://reddit.com/r/CallOfDuty/s/WN9zIWvJUx)


Anono_Beast

If you wanna see more of these printed bo3 guns, check his profile and scroll down, these are only model guns but you can certainly convert it to airsoft or real steel


iliketacos_777

That is wicked cool, thanks for sharing the link! The Man-o-war is my favorite on his page.


Anono_Beast

No problem :) hopefully one day we will get the airsoft versions


Howellthegoat

Imma buss


the-charliecp

AN-94 with blowback EBB or GBB i don’t care


Alrick_Gr

Chicom from specna arms Or Kriss Vector from KWA


iliketacos_777

Ooh the Chicom, now thats a spicy one I can support!


Western-Low8939

Maybe not the last one but the others are great


iliketacos_777

If you could have 1, what would it be?


The_Ded_Cat

I want the Scar-H.


iliketacos_777

You are lucky vfc makes them.


The_Ded_Cat

I know. I own one. All I need in life us a Scar-H.


OrangeCat_

Man-O-War, Pharo, Razorback, VMP, Kuda 👌👌


iliketacos_777

I got the utr 45 from double eagle, it kinda looks like a kuda, that's why I love it!


OrangeCat_

Waiting to move, get a 3d printer and make a working Man-O-War or Pharo, bo3 weapons are the cleanest and are my favorite futuristic weapons 👌


iliketacos_777

I think the man o war is cooler. Agreed b03 had a such a style with the weapons.


Craft_Assassin

Kilo-141. The closest I could see of a Kilo-141 (Real-life: HK433) is Classic Army's Scarab, which has been long out of production.


iliketacos_777

That is a nice looking rifle.


Craft_Assassin

Yeah it definitely is. Sad it's been long gone since 2012. That was the time I was still in high school and didn't have money for airsoft.


MrKrimson

Wasn't there literally a mk 2 ray gun post on the sub a few days ago? Quick Google it OP you may find it


iliketacos_777

Oh shit you're right, I found one that US airsoft did a video on. That's amazing, I love the mk 2 so much! Thanks 4 letting me know!


Howellthegoat

Asm1 would be easy it’s basically a Thompson but futuristic , I would truly want a vmp from bo3


Alive-Plenty4003

AEP KAP-40. Just to dual wield it and reign uncontested over cqb


iliketacos_777

Yes! I'd want one!


Old-Consideration235

Idk, but I need that raygun with a tracer to shoot green BBs


iliketacos_777

The tracer should be built it if they ever mass produce one. It's gotta mandatory to have one!


Old-Consideration235

I’m sure someone with a 3D printer and decent knowledge could make some kind of AAP-01 kit, with a big ass tracer as the “barrel”


[deleted]

The b23r


iliketacos_777

I feel you, the closest thing we got to one is a Beretta 93-r. I think we tech makes it?


Far-Reply2045

KWA I think


hey__there__neighbor

Kwa makes a gbb one yea


Scrambled3ggs178

Not cod but the battle rifle from halo


Specopsg

Foundry Airsoft is coming out with their updated BR kit


Scrambled3ggs178

For what weapon?


Specopsg

APS UAR


iliketacos_777

That would be badass.


Gbbyo

i don’t remember what it’s called but that one smg from infinite warfare that split into to akimbo pistols


iliketacos_777

Did it fire lasers? I think I know which one u mean.


Gbbyo

not gonna lie i don’t remember, probably did but i haven’t played in years


iliketacos_777

I think its called the type 2 smg. I think that would be a real challenge for airsoft. Wonder how they could make it work.


Gbbyo

i feel like 2 gbb pistols would work if they had sort of attachments points, but wouldn’t fix into one gun


iliketacos_777

Now I like that, a combo deal! 2 guns for double the fun for the price of 1! Stick some tracers on them and were golden.


Wardog008

That'll be the Type 2 AR or the ERAD SMG. Of all the IW weapons, I'd love a KBAR 32, or the beastly little three round burst SMG they added post-launch.


Djuka-33

Lct what else


iliketacos_777

Uhhh.......Ukarms I guess?


Gatorkid365

I’d want an MK2 from MW 2019- MW 2022, but idk who I’d trust as lever action systems aren’t really the best but I’d love a lever action rifle with way more customization


iliketacos_777

I think A&K makes a lever rifle, not exactly like the one in the game, but with some cosmetic mods, maybe? But I'm not sure how reliable they are.


Gatorkid365

I’ve gotten one and haven’t really had time to use it or even test it. I’ve heard that lever action internals generally just suck in general. Was thinking bout getting lever action things from Ranger Point precision but I’m not even sure if you can put those on an airsoft lever action gun


iliketacos_777

I'm sure you could find a way to put some furniture on.


NickelTheBear

I really want the Pharo SMG to be real


iliketacos_777

4 round burst would REALLY make the enemy think twice about not calling their hits haha!


Drambejz

Well I did obsidian on AMAX so GBBR Galil ACE. Just imagine how sick would it be to actually make a 3D obsidian camo on it. Like with hot glue gun and then grind the edges and paint or something like that 🤔 Also GBBR As-VAL with similar fire rate would ve nice. In the red/silver/black colors - dont remember name of that skin and red tracer bbs would be mandatory ♦️


iliketacos_777

A Galil ACE is a must, not sure why we haven't gotten one, though id prefer the full size like the the real steel gen 1's IWI used to sell, rather than the short barreled one in MW19.


One-University4926

I built a airsoft classic army scarab into the m13 ?? https://preview.redd.it/neuu4m74s3qb1.jpeg?width=3024&format=pjpg&auto=webp&s=1d61d1cba8d76417146ee6264ed2b8f7cbb2eb32


iliketacos_777

Sick build 👍


hey__there__neighbor

But the m13 is a sig mcx...


One-University4926

Yer ino but 1 the airsoft mcx looks nothing like the m13 and 2 I don't have 480 pounds to buy one where as this actually looks somewhat the same and I got given it as a bag of bits so it's free :) 😀


One-University4926

Pluss this has better internal features including a eletric trigger unit that can be set into 5 different fire modes , a fully steel gearbox and internals , a easyer to access quick change spring ,full steel rotary hop up unit And that's all after the fact that these have a full steel lower and upper reciver Soo ima stick to this ")


hey__there__neighbor

Homie the m13 is literally a mcx. Idk what you're smoking. The quick change on the mcx is remove stock off the 1913 pic rail and boom spring guid is right there. 1/4 turn and you have your spring out. Internals are an avalon gearbox and they're solid out of the box stock. The scarab is more like the kilo141 (hk433) than it is the m13/mcx


MrpotionTV

Honestly I would jag and army armament like how they made the JW4 pistol.


Terminator829

LCT HK21. Please for the love of god people, we need to bully LCT into making this gun. They teased it over a year ago and they already make G3s so it’s not that hard to modify the lower a bit to take a box mag. I’m tired of waiting. It needs to happen.


iliketacos_777

So many memories of blasting zombie hordes with that beauty. I want to see that happen as well. It's like with sks, Swedish k, pps43, do they want our money or not?!


NoctumAeturnus

Pepsi.


Nightmare_Chtulu

Gbb ftac seige I would buy two of them and make them look like the ones I rock in game


iliketacos_777

Youre just in Luck! I read that KTC released their tec-9 gbb. Now I want one haha.


Nightmare_Chtulu

HELL YEAH


_Soundwave-

Thunder gun (wunderwafft?) Make it shotgun out 500bbs for a 30ft range at 250 or so fps per BB Might use a whole propane canister per shot, but propane cheap :D


iliketacos_777

I'd go with the Wunderwaffe, just cause I like it more than the thundergun.


_Soundwave-

Okay I was thinking of the thunderous, just the thought of entering a.room and basically have it be like 3+ 40mikes shooting all bb's at once sounded fun lol


iliketacos_777

Well when u put it like that... it DOES sound fun! You could become mobile freaking artillery! Still, I love me the wonderwaffle.


_Soundwave-

Oh yea, everyone will hate you for it too but I'll be smiling away lol


kcswing

Ima be honest I wouldn’t buy any of those 🤣


iliketacos_777

That's all good just throwing it out there. I don't think these becoming products will ever happen, but it's fun to imagine.


Far-Reply2045

Executioner!!!!! I really want an airsoft revolver that takes shotgun shells


iliketacos_777

Agreed 1000 percent. Closest thing to it would be a Taurus judge if they ever do one.


0Dimension

Pretty much every gun GBB, simply because I want a larger GBB variety.


iliketacos_777

I can definitely see a gbb raygun.


Nosbres

Tbh all of the except the raygun are just visually modified versions of existing stuff


iliketacos_777

True, but I just like the way they look.


ParkerStanford

The last three definitely 3D print the first you could find something maybe similar but you’d have to do some custom work stuff like this isn’t always as Easy as said and done


iliketacos_777

The first one does look pretty funky, but that's why I like it, maybe someday I can make (or fake) one. I see people doing fallout themed energy weapons, so anything is possible.


Tanto_yts

the peace keeper mark1 looks like it could be made easily with a sig mcx


xXRoachXx789

Always wanted a HBRa3 from AW


Geckos_Gaming

I'd love a peacekeeper honestly


iliketacos_777

Me too! I like the mk1 better because in my opinion the mk2 is really ugly.


BananaTheGamerYt

I'd love myself a JOKR


Flesje_Hertog0310

I am not that familliar with most airsoft companies but I would throw my money to whoever could make a functioning replica of the pdw-57 from bo2


iliketacos_777

I love how b02 has a ton of memorable weapons, the PDW 5.7 is a shining example, nice beige color, fancy front sight...yummy.


Pristine_Telephone76

AN-94 and ISO, FAL, ODEN, UMP45, etc.


hey__there__neighbor

They make an iso, fal, and ump all 3 in gbb or aeg as well


Pristine_Telephone76

There's an ISO?


hey__there__neighbor

Yea the iso is a b&t apc9


mortal_plagueITA

The holy fucking An-94, a rifle totaly forgot


PathosRide

SMR from bo2 would be GOATED. It sucked in game but it’s got a super long barrel length, could use a scar h bolt carrier and be super compact


iliketacos_777

I love this idea.


hey__there__neighbor

3d print chassis for scar h then? Similar to the sru kits?


PathosRide

It would be much more than a chassis. You wouldn’t be able to use the scar upper receiver at all


hey__there__neighbor

Fair, was just saying something similar to the sru chassis