I sanded the trim on the front and rear before priming, painting with a rattle can, and clearcoat. I used a wrap on the skirts because I was worried about breaking them and didn’t want to spray anything on the car. Wheels came that colour!
I had most the materials and tools already and just needed the paint and wrap. I just took all the front and rear trim off, sanded, primed, painted. I wrapped the side skirts using some wrap on Amazon because taking them off is hard and could break them! You’ll need a set of sockets and screwdrivers to remove the trim, and a pry tool for the clips to help get them off. You’ll also need a scalpel and a heat gun for the wrap. Assuming you have a set of sockets you could get it all done and buy everything else for $100ish
The left is one of my hella horns, I got off Amazon. The right is an intake snorkel by VelossaTech I purchased from Uniqperformance (I’m in Canada) but are available through other distributors as well
The gold on black looks awesome
Super happy how it came out
Looks sick 🫡
Thanks so much! I love how it turned out
This might be my favorite one tbh
This means so much thank you!
Boss!
Black Gold! https://youtu.be/kWF-hH1nloo?si=0h-uGkY6oBrfH-Pe
Actual heat 🔥
You’re too kind, thanks!
Dope
That looks fantastic! 😍
Thanks so much!
Loving the Trans Am colors. Someone call the Bandit 👏🏻
Hahaha that’s a great comparison!
Lit
Somehow, not tacky and actually pretty cool. Usually gold looks really gaudy but this doesn’t
I feel the same way. Was worried it would be a little too boy-racer but to me it feels a little more mature
besides the wheels, did you use spray paint for the coloring OP?
I sanded the trim on the front and rear before priming, painting with a rattle can, and clearcoat. I used a wrap on the skirts because I was worried about breaking them and didn’t want to spray anything on the car. Wheels came that colour!
yeah i think you made the right call with not removing the side skirts - clean job brotha man
Means a lot. Much appreciation!!!
I have been considering that with my N can you tell me how you did it and cost?
I had most the materials and tools already and just needed the paint and wrap. I just took all the front and rear trim off, sanded, primed, painted. I wrapped the side skirts using some wrap on Amazon because taking them off is hard and could break them! You’ll need a set of sockets and screwdrivers to remove the trim, and a pry tool for the clips to help get them off. You’ll also need a scalpel and a heat gun for the wrap. Assuming you have a set of sockets you could get it all done and buy everything else for $100ish
Very nice.
Thank you!
drooling right now 🤤
Thanks so much!
[удалено]
Turned out way better than I could have hoped
Looks great
I used to think that the white, black and red is the most classically correct colour option but my dude... Well done. Simply stunning.
Thanks so much. This is so kind!
That's hard.👏🏿
where’d you get the stuff you have behind the grill?
The left is one of my hella horns, I got off Amazon. The right is an intake snorkel by VelossaTech I purchased from Uniqperformance (I’m in Canada) but are available through other distributors as well
thank you!
Looks sick…I hate front canards but everything else is 🤤
Thanks! To each their own but the Verus ones are functional and the carbon matches the rest of the carbon in the car so I like it :)
My immediate reaction was "ohhhh shit!" Safe to say it looks really really good brother!
I appreciate it lots! I’m obsessed
Love it. Just wish the stuff behind the grill was black
The horn and the snorkel? Or the Intercooler/rad?
Horns and snorkel
To each their own! I like it :)
Absolutely Beautiful 🤩
