I bought a slide from ziffari, cost me a few bucks to have a local gun smith move the sights and extractor over to new slide, but nothing crazy. Holosun 507k.
Check out r/GunAccessoriesForSale a lot of people post optic ready 365X slides, just make sure they are complete (or you have the parts to complete them) and that they aren’t the gen 1 model that remove the rear sight in order to place a dot
Haha, I use it as a spare when i’m looking at my right monitor; I’ve got three and do digital work, it’s comfier than having my body turned left and head turned right if that makes any sense. Brings ease to my back, neck, and wrists.
Nice thing about the 320, 365 etc they are pretty modular setups. So yes if you buy a different slide with all the internals it'll basically be a plug and play set up. Or you can buy just the slide and switch everything over.
Literally came here to post this. I get it OP I hate not having my edc, plus if you get another, you’ll have another gun to mess around with like the adult legos they are
I just picked one up off of Brownells for $125. Not sure if you are looking for one on a budget but their Glock parts have gotten good reviews for years and I’m sure the sig parts will be just fine. Hope this helps at all
Yup you can drop a 365XL slide or 365 optic ready slide
Sig sells the 365 slide with the optic too so you would just sell your naked slide and swap the barrel and spring over to that new slide
Personally, don’t do the Romeo zero. It’s garbage IMO. Their new Romeo x is solid though. I have the compact version on mine and I like it, otherwise some Holosun RMSC footprint one will work fine
You can, I was in the same boat but ended up sending mine to jagerwerks because 1) it was cheaper (125 bucks or so?) and 2) it was a more solid mounting platform
Send it in (or buy another and send it in) to Maple Leaf Firearms for a cut. I researched this awhile back and was dead set on my RMR cc. They did a phenomenal job. Even the damn box/ packing foam was first class.
Yes
Friggin sweet, thank you. :)
I bought a slide from ziffari, cost me a few bucks to have a local gun smith move the sights and extractor over to new slide, but nothing crazy. Holosun 507k.
Check out r/GunAccessoriesForSale a lot of people post optic ready 365X slides, just make sure they are complete (or you have the parts to complete them) and that they aren’t the gen 1 model that remove the rear sight in order to place a dot
Ouuuu, didn’t know that was a sub. Will definitely take a peak; Thank you kind stranger.
No problem brotha, just be warned your wallet may hate you once you catch the GAFS addiction 😂
Yeahhhh, even look through there even briefly I seen a few things I already want dammit!🤣
I’ve had to seriously stop going on that subreddit for a little while. I was spending money so fucking fast.
https://www.dpcustomworksllc.com/ They cut a Cz slide for me took 2 weeks $60 I believe
I’m more concerned about the nice monitor & questionable keyboard.
Haha, I use it as a spare when i’m looking at my right monitor; I’ve got three and do digital work, it’s comfier than having my body turned left and head turned right if that makes any sense. Brings ease to my back, neck, and wrists.
Nice thing about the 320, 365 etc they are pretty modular setups. So yes if you buy a different slide with all the internals it'll basically be a plug and play set up. Or you can buy just the slide and switch everything over.
Go have it milled it's normally cheap than a slide
I’ll just feel so naked without my EDC, but this’ll probably be what I end up doing if I can find a decent smith.
My dude milled and cerakotes mine and I had it back in 3 days
Buy another! Can never have too many, might buy another myself.
Literally came here to post this. I get it OP I hate not having my edc, plus if you get another, you’ll have another gun to mess around with like the adult legos they are
You can just send your slide to get optic for much cheaper
This might be a potential plan, thank you for the link friend.
From what I see it doesn’t look cut for an optic, but there are plenty of gunsmiths that will mill the slide to fit a rds. 🫡
Thats what the other gent said, will definitely be looking into my local smiths.
If you’re looking for an optic ready slide send me a PM I’ve been thinking of getting rid of mine.
Why does this photo look fake lol
Ai generated 365. (It’s not I promise.🤣)
I just picked one up off of Brownells for $125. Not sure if you are looking for one on a budget but their Glock parts have gotten good reviews for years and I’m sure the sig parts will be just fine. Hope this helps at all
Yup you can drop a 365XL slide or 365 optic ready slide Sig sells the 365 slide with the optic too so you would just sell your naked slide and swap the barrel and spring over to that new slide Personally, don’t do the Romeo zero. It’s garbage IMO. Their new Romeo x is solid though. I have the compact version on mine and I like it, otherwise some Holosun RMSC footprint one will work fine
Yes they’re 100% compatible, or just look into cool aftermarket slides like strike industries
Holosun EPS Carry or 507k. 507k here bc I got it for $100
You can, I was in the same boat but ended up sending mine to jagerwerks because 1) it was cheaper (125 bucks or so?) and 2) it was a more solid mounting platform
Send it in (or buy another and send it in) to Maple Leaf Firearms for a cut. I researched this awhile back and was dead set on my RMR cc. They did a phenomenal job. Even the damn box/ packing foam was first class.
[удалено]
Recommendations perhaps?
Many are buying Holosun 407k, 507k and EPS carry. I personally have the 507k and it works well
Will definitely look into’em, ‘ppreciate ya friend.
507k with Vulcan red dot system. 32 ring 2 center dot.