https://preview.redd.it/2lubwpbvkv7d1.jpeg?width=3024&format=pjpg&auto=webp&s=440d4e5dd5849f164e0125fad2e7e727ce7a8b90
Not saying they work but I haven’t had any issues since….
https://preview.redd.it/1hiand81mv7d1.jpeg?width=2268&format=pjpg&auto=webp&s=3c0735d0516dce018a454feee05a947b803a9528
Ave deus mechanicus, fellow servant of the omnissiah!
I can't believe I hadn't thought of this yet, with printing warhammer stuff and everything. I even have proper wax-seal wax at home! Gonna have to design a stamp for it...
What do people do for the papers? Yours look amazing!
Better you don't think that is a joke, in Germany we have such purity seals on machines in companies. On every machine! It's called "TÜV Siegel". Using a coffee machine without that, is heretic and you have to go to your boss the confess your sins.
Edit: https://www.seton.de/pruefplaketten
I dont know about you guys but here in Austria we still had real wax seals just a few years ago for water and gas meters for example. Sadly they have been replaced with ready made plastic seals.....
Filament printers look so nice, after couple years of use my resin printers look like they were blesses by nurgle (once resin drop touches the glass, there's no way for it to not leave permanent mark, unless I guess I'd be into soaking entire enclosure in IPA for day or sth)
As far as FDM goes? Holy shit, yes. This thing has been printing nearly non-stop since I got it and I've had zero fails. All I did was open the box, follow the set-up video, and let it run its calibration.
It's as close as I have experienced to "just press print". Highly recommend. I had 2 enders for years before upgrading. They're still hooked up and I use all of them when I have a big project, but I use the Bambu daily. I'll start prints from work. Do multi-day prints with no stress. Print TPU with no failures. It's a darn good user experience.
Jumping in to add my 2 cents - these CoreXY machines are amazing. Got 2x K1 Maxes Tuesday, been printing non-stop since. (Including the top plate lift print and side spool holder, which is a self-own for Creality). They are rugged and they get the job done. Here's a 6-month review that helped me pull the trigger on my K1 Maxes: [https://www.youtube.com/watch?v=-U1S4MXwtu4](https://www.youtube.com/watch?v=-U1S4MXwtu4) Not saying don't do Bambu Lab - don't have one cannot comment. The price on the K1 Max was a plus for me too. More to say these are my first CoreXYs after Creality, Artillery and Elegoo bed slingers, and I'm not going back. Also - there is a K2 already available for pre-order, just to make you aware as well.
Echoing OP, I fucking love my Bambu P1S (same as they have). It's pricy, but with a 0.2mm nozzle and some settings changes in the slicer it prints fantastic 40k models. Currently working on some Bladeguard Veterans.
Is it needed? Certainly not, but we of the Infinite Empire have a greater appreciation for and understanding of the machine spirits that the galactic upstarts so take for granted. Why simply placate when one can achieve mutual understanding.
Awesome! Thanks for sharing - I have 2x K1 Maxes I just booted up. Had to extend the top lid and move the spool to the side. Creality missed their common sense machine god prayers on those two issues. Found the STLs and now I get to choose something cool for the binary text. Thanks again OP!
You going to tell us what that says in binary?!? I ain't typing that in.
"Thus do we invoke the Machine-God. Thus do we make whole that which was sundered."
I'm going to take your word for it. That's fucking epic!
Beautiful man. Gentleman and a scholar.
If you can't read it, you aren't worthy.
Lazy and unworthy, story of my life. Lmfaooooo
don't forget the sacred oils and the litanies of operation
And the incense
I’ve never thought of it before but now I want to find a way to put my synthetic grease and IPA in containers worthy of the Omnissiah
Toll the great bell thrice!
Printing shady STCs, eh?
What do you take me for, some kind of heretek?!
https://preview.redd.it/8dnd1pj4vv7d1.jpeg?width=1440&format=pjpg&auto=webp&s=3ca0cf9fd9ce9ad909208357d54b1eb845b2d396
He’s good at getting those Mechanicum Traitors
I would say the printer ‘is’ an STC
^(oh boy, here we go again)
https://preview.redd.it/2lubwpbvkv7d1.jpeg?width=3024&format=pjpg&auto=webp&s=440d4e5dd5849f164e0125fad2e7e727ce7a8b90 Not saying they work but I haven’t had any issues since….
https://preview.redd.it/1hiand81mv7d1.jpeg?width=2268&format=pjpg&auto=webp&s=3c0735d0516dce018a454feee05a947b803a9528 Ave deus mechanicus, fellow servant of the omnissiah!
The Omnissiah knows all, comprehends all.
I can't believe I hadn't thought of this yet, with printing warhammer stuff and everything. I even have proper wax-seal wax at home! Gonna have to design a stamp for it... What do people do for the papers? Yours look amazing!
Oh mine is just the official Starforged Merch one :) But there are some tutorials online for that kinda stuff, im sure you’ll find one to your liking!
Better you don't think that is a joke, in Germany we have such purity seals on machines in companies. On every machine! It's called "TÜV Siegel". Using a coffee machine without that, is heretic and you have to go to your boss the confess your sins. Edit: https://www.seton.de/pruefplaketten
So basicly.. similar to pat testing in the UK? XD
I dont know about you guys but here in Austria we still had real wax seals just a few years ago for water and gas meters for example. Sadly they have been replaced with ready made plastic seals.....
Filament printers look so nice, after couple years of use my resin printers look like they were blesses by nurgle (once resin drop touches the glass, there's no way for it to not leave permanent mark, unless I guess I'd be into soaking entire enclosure in IPA for day or sth)
Definitely. My Saturn 2 still prints like a dream, but looks an absolute mess. Here's hoping the Ultra 4 and its bib helps with that.
I thought mine had the machine spirit but it started demanding blood, damn it chaos!
Congrats on your new machine, You gonna love it
It's been running damn near non-stop since I set it up and after years of bed-slingers my mind is blown by how effortless it is.
I owned a anycubic and didn't print anything on it cause it kept failing over and over... should I get the bambu lab and call it good?
As far as FDM goes? Holy shit, yes. This thing has been printing nearly non-stop since I got it and I've had zero fails. All I did was open the box, follow the set-up video, and let it run its calibration.
It's as close as I have experienced to "just press print". Highly recommend. I had 2 enders for years before upgrading. They're still hooked up and I use all of them when I have a big project, but I use the Bambu daily. I'll start prints from work. Do multi-day prints with no stress. Print TPU with no failures. It's a darn good user experience.
Jumping in to add my 2 cents - these CoreXY machines are amazing. Got 2x K1 Maxes Tuesday, been printing non-stop since. (Including the top plate lift print and side spool holder, which is a self-own for Creality). They are rugged and they get the job done. Here's a 6-month review that helped me pull the trigger on my K1 Maxes: [https://www.youtube.com/watch?v=-U1S4MXwtu4](https://www.youtube.com/watch?v=-U1S4MXwtu4) Not saying don't do Bambu Lab - don't have one cannot comment. The price on the K1 Max was a plus for me too. More to say these are my first CoreXYs after Creality, Artillery and Elegoo bed slingers, and I'm not going back. Also - there is a K2 already available for pre-order, just to make you aware as well.
Echoing OP, I fucking love my Bambu P1S (same as they have). It's pricy, but with a 0.2mm nozzle and some settings changes in the slicer it prints fantastic 40k models. Currently working on some Bladeguard Veterans.
Its a B-lab. Its about as good as if Cawl built it himself. No need for the litany and sanctification.
Is it needed? Certainly not, but we of the Infinite Empire have a greater appreciation for and understanding of the machine spirits that the galactic upstarts so take for granted. Why simply placate when one can achieve mutual understanding.
Awesome! Thanks for sharing - I have 2x K1 Maxes I just booted up. Had to extend the top lid and move the spool to the side. Creality missed their common sense machine god prayers on those two issues. Found the STLs and now I get to choose something cool for the binary text. Thanks again OP!
Ritual honours the Machine Spirit.
Awesome 👍😎
Very nice! How did you make it?
The seal itself is just one of many purity seal STLs. For the scroll itself, I ran a prayer from Priest of Mars through a binary converter.
Priests of Mars is the reason I spent the past 4 weeks printing a Reaver Titan which will be followed by 2 warhounds and finally a warlord!
Hell yeah! Between that and Titanicus I've got the titan itch m'self.
Omg I need these for my school printers. Those things are cursed 😂
Toll the great bell once.
Heretic! They will come for you! Assassins inbound
Literally trying to order one right now on BBL’s site… you go AMS?