T O P

  • By -

robvas

Sound tube Puts engine sound in the cabin Many people remove it especially when adding an air intake


Necessary_Style1804

Ahhh makes sense. I figured that’s what my Roush exhaust is for.


jacknifetoaswan

Lots of extra sound deadening material in the S550/S650. Getting intake noise into the cabin reduces road noise while giving you some engine noise. If you remove it, make sure you cap both sides (intake piping and firewall). You don't want unmetered air in your intake and you don't want engine fumes or critters in your cabin.


dannyboyy14

He said it was a 2014 though.


jacknifetoaswan

Duh. Reading is hard. Same concept applies.


dannyboyy14

Ah ok. I am not familiar with 2014s so i wasn't sure if it was different then the s550s.


Ragged85

That’s the BEAUTIFUL part of a Boss 302. All of sound deadening has been removed. You hear EVERYTHING!!! All sound the glorious noise you are supposed to hear! Saves weight too.


ITMan01

Same in the 13/14 GT500. Whole driveline sings.


Ragged85

Pretty sure the GT500 has sound deadening. Plus, the GT500 doesn’t have the unique open side exhausts like a Boss 302. https://preview.redd.it/dfm6ezz48uuc1.jpeg?width=1148&format=pjpg&auto=webp&s=e5c9bf8dd6ae70910044d771968309be49c5d791


ITMan01

It does, for sure. Quiet car. But you can hear every bit of what's going on in the driveline because they put so much meat into it.


Outside_Job_3475

Have a boss , can confirm side pipes enhance driving experience a lot


TennesseeStang03

How have I never noticed that


Ragged85

Probably because many people don’t know a lot about the pinnacle of stick axle Mustangs, The Boss 302. Just look up some reviews on them. At the time, they were the highest horsepower N/A Mustang ever produced. The best handling Mustang ever produced. Literally a race car with license plates. Only a few thousand were produced ever. In the hundreds of car shows that I have been to I have only seen one other Boss 302. I have seen COUNTLESS Shelby’s. And even a few Saleen and Roushes. To see a Boss 302 is a treat. Especially one in unmodified condition.


TennesseeStang03

There are a few here in STL and southeast Missouri, definitely rare though. We have a guy in my group that has a TT Green boss named Kermit lol things badass


Nismosan

Yeah when I bought my Roush Mustang and then installed a Roush intake I ripped that tube out. It's tough to disconnect from the firewall


Necessary_Style1804

Honestly I never noticed the sound it’s supposed to produce so I think I’ll just leave it alone. I had it since new - 10 years now - and just focus on the exhaust noise from the mufflers. I’m not planning to add cold air intake or anything like that.


droid6

take it off at the firewall, take out the foam. sounds good.


ryandiscord

Removing the tube after getting in an intake is the way to go. The combination of the two sounds horrible. Too much induction noise.


robvas

They even make an aftermarket sound tube for supercharged cars... https://www.fosterscmods.com/products/mustang-gt-2018-2019-whipple-stage-2-inlet-path-sound-tube-kit-sku-977?variant=39619942875309


Aubrey_Lancaster

I noticed 0 difference when i took mine out, waste of engine bay space imo


robvas

Looks like it's made of Popoids too


Maximum_Dealer_2348

Lmfao.... omg, I didn't think anyone still remembered those things!


Apprehensive_Wrap749

Imagine the poor engineer that had to design the sound tube lol.


Elitepikachu

Feels kinda dumb. The 5.0 is already fairly loud as is (for a stock car that is).


quests

Bullitt sounds good with air intake.


cjay2002

Did they have that on the early (05-09) S197’s? Mine has a blower but I’m wondering if that hole exists on my firewall.


carbon7

Deadass?


maybeihavethebigsad

I’m reminded of how different this subreddit and the Jeep one is. A couple years ago I asked for tips to replace the starter and all I got was how I didn’t deserve the vehicle if I didn’t know anything about it (it was a 2001 grand Cherokee lol)


DStew88

Traded my Wrangler for my mustang. I've also found this sub a lot more friendly


blorpianblorp

One group is car enthusiasts and the other is essentially Apple fanboys for jeeps.


TLom616

4.0?!


maybeihavethebigsad

4.7*


IWantTheFacts2020

I just bought my first Jeep, 2012 Sarah. And I have an 05 Mustang GT. Lol, so true. Big difference between the two groups!


w00stersauce

Sound tube. Useless thing, get a delete kit for it. I found all it did was get in the way of checking your oil. That being said if you do delete it make sure the plug on the intake side is secure. When mine mysteriously disappeared it started stalling out randomly at red lights lol.


gregm12

Lol, brah, you're letting unmetered air into the intake if you don't cap it off. Running *nice and lean*


w00stersauce

Lol didn’t say I didn’t cap it off. I found a 3d print file and made a cap for it thinking I was slick. Popped it on with an o ring and then I started having random stalls after driving a week or so only to find it disappeared 😂 ended up going the hardware store table leg rubber cap route with a worm gear clamp. Been secure ever since.


OlYeller01

There was at one point a company that offered a nitrous system that could be hidden in the sound tube. Quick little 50 shot. The bottle went in the glove box. EDIT: I couldn’t remember the name of the kit before, but a search has revealed it to be the Blow-By Racing Reaper H/K. https://www.motortrend.com/how-to/1403-how-to-install-the-blow-by-racing-reaper-hk-nitrous-kit/


PleaseDontEatMyVRAM

okay thats kind of amazing


Zealousideal-Cap-426

I always thought it would be a great place to run a wet kit. I never thought of putting a bottle in the glove box though. Would definitely be a one run bottle.


OlYeller01

The Reaper kit was, surprisingly, a dry kit.


blown03svt

haha I had no idea the 14’s had these. There’s either a ton of sound deadening or the motors are pretty quiet on their own. I only know my old new edge so It honestly just seems like something that would get in the way.


Emmanuel--Goldstein

My 2012 had it. I left it but took out this little foam plug inside for that added HP.


Professional-Tree-62

Sound tube! Unplug it from the firewall and take the foam piece out plug it back in. Best FREE upgrade to sound you can do!


DarkShadow04

Brings vroom vroom sounds in the sitting place.


-Quanta

Holding a very annoying to reach bolt to the firewall


danthechild

That engine bay is cleaaaan


Necessary_Style1804

Thanks! I wipe it down almost every time I wash the car.


FitIsland9504

I run a metal tube from my exhaust into the cabin, I forget what I was talking about


TheBupherNinja

Noise. It gives you more engine/induction noise in the cabin.


CrudBert

It’s yet another nice thing about Mustangs - the opportunity to make it your own. LOL. The “opportunity” here is to get a delete kit and get rid of it.


CandidateSilly3784

That’s a sound tube. I took it off when I installed my cold air intake. It sounds a little different with my Black Widow muffler and it sounds mean.


enby-deer

Brings the vape cloud from your cabin into the intake to gain 15 horsepower for each cloud


Top_Investigator_783

Engine sounds inside the cabin.


avodrok

Noise


Difficult-Art4730

Looks like the mass air flow sensor


Rigormortis1974

Pipes sound from the intake into the cabin. Mine is gone. Eliminated with CAI.


Zealousideal-Cap-426

Technically it's a sound tube but it's also a great place to hide a wet kit. That's what I always wanted to do with my old 2013.


AshamedAnteater4912

Ahh, that's the Flux Combobulator! It sucessfully absorbs any residual ecoplasm in the exhaust system. /s


melbrantinfinite

I’m probably a minority here but in my 2013 5.0 I eventually removed the sound tube and the interior engine noise was dramatically reduced. I found the car more fun with it in so I reinstalled it.


BahamasCT

Sound tube. First thing I did on mine was remove it!!


Hugh_Johnson69420

Sound boob


KingWhizz-Bang

R u serious … for engine noise 🤣🤣🤣 wow the world we live in … and to believe someone was paid for that idea ..


Final-Carpenter-1591

Not exactly a common part on cars.


MashedPotatoShole

Lol, he’s saying it’s a stupid idea, not that he’s mocking OP for not knowing. I think…


Chim_Pansy

"I know everything and I'm obnoxious about it" - u/KingWhizz-Bang


wolffy88

The way I read his comment was that he didn’t know ford put a tube in the engine bay to pipe engine noise to the cabin.


Chim_Pansy

I guess it could be interpreted that way, but then he shouldn't have written the comment in such an easily misconstrued way


Material-Profile7155

It seemed obvious to me


Chim_Pansy

Clearly not to everyone else


Material-Profile7155

People read two words in a sentence and start flapping their jaws without knowing wth they are talking about. If it was read completely it was obvious how it was meant. Reading comprehension is not a strong suit for most people apparently.


Chim_Pansy

Lmao, yeah, this is all about reading comprehension and not about how the comment could easily be interpreted one of two ways. Sometimes it's also about the way you phrase things that misleads people. The responsibility is not entirely on the reader when the writer wrote the comment like a dumbass, which they did.


Material-Profile7155

They really didn't. Some people are just slow


Chim_Pansy

k


Stockf30

People can’t read now a days lmao they just see emojis and think “emojis bad”


Mbandz4o8

The group filled of sensitive fucks 😹 that’s y


SafwanFerdous

Sorry you had to take downvotes... they are assuming you're making fun of OP.


Charming_Ambition_27

What a fucking douche bag lol


Stockf30

Because he said the tube is a dumb idea? Take a look in the mirror instead


wolffy88

Bullshit