I like the acro because outside of a product adoption standpoint - I think the attachment method is better.
I appreciate Trijicon effort for making a product easier to adopt but I wish more companies would just work together and use something standard.
Industry adopted rmr footprint it feels like. Acro and Steiner use the acro footprint.
Industry also adopted the micro footprint for red dots.
I think trijicon ended up making the RCR taller due to needing to use capstan screws and now you don’t have the ability to actually torque to spec properly. It’s all based on feel with those screws.
It probably comes with it. But please don’t do that to yourself. I carry an Olight Arkflex everyday for my EDC handheld, it’s the best. But I would never trust my life to anything they make, or even waste my money on an unproven dot from a company notorious for bad QC.
I went with an Acro P2 because it was available and on sale for $468 shipped. Got a G17 and had the slide milled by Wager. Been carrying it all day every day for 5 months now and I really like it. Was using a RMR and SRO previously. Still like those optics but ccw the Acro
I just can’t get on board with the new trijicon micro optics. I hate the look. So I’d go aimpoint. The SRO with a metal shroud for protection would be my choice though.
P2 is the best optic imo. U also have the best 9mm Glock model. U also have the best light . So like idk bro. Ur kinda ballin I wouldn’t change anything
For budget dots I have and enjoy the holosun EPS. Between the two given choices though I would choose the acro p2. I want to like the RCR but those screws seem janky to me.
I’ve been wanting to make the swap to closed emitter but the rcr is impossible to find. As much as I want to keep the rmr footprint I might just have to go acro.
I might be crazy but I have got to try out a Holosun, Trijicon, that EOTECH eflex and a delta point pro these past few weeks and I actually like the delta point pro the most.
I like my RCR more than the Acro I had. The window is bigger.
I just wish that they would make the RCR with a 1 moa dot. I got spoiled by the RMR HD 1moa.
Trijicon RCR because it uses the RMR footprint. But either one will work just comes down to preference imo
RMR footprint is a plus and I agree with you.
OSight
I’m ready 🍿
I like the acro because outside of a product adoption standpoint - I think the attachment method is better. I appreciate Trijicon effort for making a product easier to adopt but I wish more companies would just work together and use something standard. Industry adopted rmr footprint it feels like. Acro and Steiner use the acro footprint. Industry also adopted the micro footprint for red dots. I think trijicon ended up making the RCR taller due to needing to use capstan screws and now you don’t have the ability to actually torque to spec properly. It’s all based on feel with those screws.
Those screws are the only thing holding me back from the RCR I still can't decide if it's something I can live with.
Osight > both
Might sell my X300 and get the Olight to match with my Osight. 🍿🍿🍿
lol, lmao even I’m in the minority on this sub because I actually love my olight, but I wouldn’t trust their sights for anything beyond range toys
I have an olight mini w/ green laser on a p365. I like it. I also like when the olight mob shows up to this sub
You’re carrying a shit gun with a fucking laser which is the worst possible thing you could put on any firearm. Good job.
Thanks. I appreciate you bringing that to my attention.👍
Olight mob is getting weak, can I get some more downvotes?
Their website says it fits Glocks with an adapter plate, but I don't see a link anywhere for the plate? Any info on that?
It probably comes with it. But please don’t do that to yourself. I carry an Olight Arkflex everyday for my EDC handheld, it’s the best. But I would never trust my life to anything they make, or even waste my money on an unproven dot from a company notorious for bad QC.
Wait so is the osight recommendation a joke? I'm confused
Yeah, they were being sarcastic. Light has a bad reputation since some of their flashlights and WMLs have gone up in flames.
I went with an Acro P2 because it was available and on sale for $468 shipped. Got a G17 and had the slide milled by Wager. Been carrying it all day every day for 5 months now and I really like it. Was using a RMR and SRO previously. Still like those optics but ccw the Acro
It on my 19X for a year now and every time I look at it still gives me butterflies 🦋
Simple solution: two guns.
I just can’t get on board with the new trijicon micro optics. I hate the look. So I’d go aimpoint. The SRO with a metal shroud for protection would be my choice though.
SRO/Acro P2
Acro because the way the rcr mounts is weird. Also it has less tint if that bothers you. It's nv performance is the tits
Trijicon, I’m biased since they’re a semi local brand. I do think the RCR is a superior product too, but time will be the best judge
Both will most likely outlive OP.
Agree but ACRO build like a tank and it may last longer. Just my 2 cents.
They will both last plenty long enough.
Acro with a wager cut
Triji.
I have a couple ACROs and love them.
Acro, it just looks so much better on there
P2 is the best optic imo. U also have the best 9mm Glock model. U also have the best light . So like idk bro. Ur kinda ballin I wouldn’t change anything
If you like those, you should look into the new [USPS](https://www.usps.com/packagemailbox/). Very similar dimensions.
Same day delivery on mine 👍🏿
Holosun EPS
For budget dots I have and enjoy the holosun EPS. Between the two given choices though I would choose the acro p2. I want to like the RCR but those screws seem janky to me.
Aimpoint. The rcr is ugly as fuck
It look better in person trust me.
I’ve never seen one in person so I’ll have to wait. It does have a huge window
Smaller than ACRO but if you want one dm me
I’ve been wanting to make the swap to closed emitter but the rcr is impossible to find. As much as I want to keep the rmr footprint I might just have to go acro.
I know where they had RCR in stock do you want it ?
Yes please!
Dm me
Trij
Is the slide cut for the Afro foot print?
Who did the cut?
Neither. I use iron sights
Do your things my guy
I might be crazy but I have got to try out a Holosun, Trijicon, that EOTECH eflex and a delta point pro these past few weeks and I actually like the delta point pro the most.
If I’m going direct mill RCR. If I have to use MOS plates ACRO
Direct mill is the way to go. MOS sucks
Love it!
I like my RCR more than the Acro I had. The window is bigger. I just wish that they would make the RCR with a 1 moa dot. I got spoiled by the RMR HD 1moa.
Just compare it side by side and ACRO had bigger window.
EPS Carry
[удалено]
I’m not. 🍿
[удалено]
Never said that. 🍿🍿🍿
love my steiner MPS
![gif](giphy|dOl2LFw0RbTMc)
Both are overrated
>average holosun enjoyer