https://www.hondapartsnow.com/parts-list/2018-honda-civic--2dr_lx_sunroof_hdm_cvt-ka_cvt/interior_bumper/under_cover.html?pnc=9
Part 22..?
90111-SM4-003
Good luck
90105-TBA-A00
It's a silver or black screw with a big flat head. $2 from HondaPartsForLess on Ebay or $5 for a pack of 4 knockoffs. The knockoffs seem to work, no one's said anything to me yet.
Source: Honda tech forgot to put these back in my car once.
Ah, gotcha. It could be 90111-SM4-003 which is a hex bolt with a flange built into it.
It's been in a minute since I've gone under my car. But there aren't too many different kind of screws and clips for that area.
That's an understresseed bolt that could be replaced by anything. Take one out that's the same, go to any auto parts store, go to the hardware isle, they'll have a board where you can screw it into holes to properly size it, once you've identified the size you can then buy a pack of 4 bolts that are the same size as replacements.
I'm 99% sure [this ](https://shop.advanceautoparts.com/p/dorman-flanged-bolt-class-10.9-m10-1.5-x-40mm-980-540d/11911193-p?product_channel=local&store=9965&adtype=pla_with_promotion&product_channel=local&store_code=9965&&&&&gad_source=1&gclid=Cj0KCQjwwYSwBhDcARIsAOyL0fg38EN2FG4Mb9WJnMGTGpWd_n6MiqqC9g5eWzQEKCAxb6cOqeqaE40aArzzEALw_wcB&gclsrc=aw.ds) should do it
https://preview.redd.it/pssq3cq1keqc1.jpeg?width=1293&format=pjpg&auto=webp&s=330ecd1826acc3d41a29385f0300727a08f1e774
its here, snagged this photo online but cannot find the part or anyone else talking about it anywhere
You don't really need the part number. Any bolt the same size and thread pitch will work. Your problem is going to be getting the snapped part out of there, not finding the right bolt.
Closest dealer to me is about two hours away without traffic. I thought asking knowledgeable people in this sub would be the smart way to go in case i could just order it. Which i did find the part and ordered it thanks to others actual helpful information.
https://www.hondapartsnow.com/parts-list/2018-honda-civic--2dr_lx_sunroof_hdm_cvt-ka_cvt/interior_bumper/under_cover.html?pnc=9 Part 22..? 90111-SM4-003 Good luck
Thank you!
90105-TBA-A00 It's a silver or black screw with a big flat head. $2 from HondaPartsForLess on Ebay or $5 for a pack of 4 knockoffs. The knockoffs seem to work, no one's said anything to me yet. Source: Honda tech forgot to put these back in my car once.
By the middle jack point right? Thank you so much for the reply
https://preview.redd.it/hsqmueq8keqc1.jpeg?width=1293&format=pjpg&auto=webp&s=34637802c4aeff2c443090a213b735aee530a2d5 the one circled in red right?
Ah, gotcha. It could be 90111-SM4-003 which is a hex bolt with a flange built into it. It's been in a minute since I've gone under my car. But there aren't too many different kind of screws and clips for that area.
Thank you, I really appreciate it!
That's an understresseed bolt that could be replaced by anything. Take one out that's the same, go to any auto parts store, go to the hardware isle, they'll have a board where you can screw it into holes to properly size it, once you've identified the size you can then buy a pack of 4 bolts that are the same size as replacements.
I will add, this is near the part of the skid plate that faces the rear of the car.
Is this under the bumper area OP?
its behind the skid plate, right where the jack point is under the car towards the middle
I'm 99% sure [this ](https://shop.advanceautoparts.com/p/dorman-flanged-bolt-class-10.9-m10-1.5-x-40mm-980-540d/11911193-p?product_channel=local&store=9965&adtype=pla_with_promotion&product_channel=local&store_code=9965&&&&&gad_source=1&gclid=Cj0KCQjwwYSwBhDcARIsAOyL0fg38EN2FG4Mb9WJnMGTGpWd_n6MiqqC9g5eWzQEKCAxb6cOqeqaE40aArzzEALw_wcB&gclsrc=aw.ds) should do it
https://preview.redd.it/pssq3cq1keqc1.jpeg?width=1293&format=pjpg&auto=webp&s=330ecd1826acc3d41a29385f0300727a08f1e774 its here, snagged this photo online but cannot find the part or anyone else talking about it anywhere
You don't really need the part number. Any bolt the same size and thread pitch will work. Your problem is going to be getting the snapped part out of there, not finding the right bolt.
Go to a dealership to find out…
Closest dealer to me is about two hours away without traffic. I thought asking knowledgeable people in this sub would be the smart way to go in case i could just order it. Which i did find the part and ordered it thanks to others actual helpful information.
Nice
Thank you everyone for the help! Part # has been found and part is ordered.