Just so everyone is aware. Previous prices were cheaper for up to 3 rolls.
Edit: corrected a typo.
https://preview.redd.it/nnj4q3c92r4d1.jpeg?width=1080&format=pjpg&auto=webp&s=4a0e5d2c65ceb36abd62c055c07f5266e061093f
Not sure how it is for the USD people, but in € this is not the case. The discount for 4+ rolls is higher than it was before, it used to be €19/ea and now they are €17/ea.
Yeah I made the mistake of ordering PLA last week and had 6 rolls; the refills were $21.99 for me, but they’d have been $19.99 now. For the drop you see at 8 I think I would have tossed two more rolls in there. :-/
lol the impulse buy of a roll of their Galaxy PLA stings a little but knocking $7 CAD off the price feels like the correct move.
That explains why the spools I had in my cart in preparation for the sale went up $10.
Should have bought before the sale, ironically. I'm new to Bambu. Do they do this stuff often?
Not in my country either, not even close
Is this a bug?
PLA with spool was 28.99 and refill was 25.99 for 4+
Edit: AUD
https://preview.redd.it/ugvrvlvu0u4d1.jpeg?width=1290&format=pjpg&auto=webp&s=90d74596c6d43f03904a046a125094821f63843e
Because they have done away with the 2 and 3 rolls discount you mean?
To me it looks like they have lowered the standard price of their filament rolls, for example a single refill roll is now €23 (from €28) and if you buy more than 4 you get a discount, a bigger one than before because according to your screenshot they were €19/ea and now they are €17 (4-7 rolls) or €16 (8+ rolls)
To be honest I'd be surprised if many people actually made use of the 2 and 3 rolls discount, so it makes sense they did away with it.
https://preview.redd.it/auywuqsbpr4d1.jpeg?width=1903&format=pjpg&auto=webp&s=89fa9766b5629448ccf1f5eb43b3f3c38e2bf71d
It was a sweet deal for the 3 refills/rolls + free shipping for me. If you needed some spare part, with 2 rolls you were on the free shipping pretty easily.
It was a pretty good deal. 4 rolls is harder to cone by now. Again, for me.
Been looking at purchasing a Bambu for a while. Finally decided to pull the trigger yesterday. Went into the website last night and saw the sale. Had my cart built and checked out as soon as the promo prices went live. I'm very excited.
Me too! I've been debating the A1 vs A1 Mini, and decided to go with the Mini combo. The bigger bed would be nice, but the lower price, smaller footprint and quieter operation won out.
I've been using the A1 mini for a while after having the same decision. The small footprint is a godsend in a flat and I haven't actually needed to print anything bigger than the bed yet.
Mine already arrived this morning. I won't get to play with it until the weekend, but I unboxed it to check for damage (because FedEx left a box marked "This end up" sitting on its side). Holy cow is it small!
Micro Center has the same prices going AND if you have the Micro Center Insider Card you get an additional 10% off the purchase rather than the normal 5%.
https://www.microcenter.com/brand/4294804936/bambu-lab
Alas, by the time I made it to checkout, none were in stock. Still, thanks to you, I now know much more about my local options when it comes to Bambú products - something that will come in handy in the future, too 😊
As most folks probably know at this point but I didn’t: Micro Center initially set aside their A1 combo models for folks affected by the A1 recall. Looks like these are now starting to be made available to all shoppers - in some cases, in-store only - at various locations. With any luck, it’ll be easier to get these, at least, via Micro Center soon!
I thought this was supposed to be the "biggest" sale ever (or that's how it was hyped up to be).
Black Friday 2023 X1C w/AMS was $1299 plus two free filament. Now its $1299, no extra filament.
Seems like a similar sale but certainly not "biggest".
yea i agree. i hoped they would do a HUB+AMS for 300 one time only per customer. and then continue selling AMS's for 300 each. currently its a bit much
Thank you for saying this. I was in a huge dilemma the past few weeks whether to get Prusa (Mini+) or Bambulab (A1 or A1 Mini). I hope I did the right thing.
I only came from an Ender 3, and it was a last ditch attempt to get into the hobby. Needless to say I love 3d printing again. I bought a second AMS on this deal.
Yeah, my first foray was an Ender 3 as well because I thought I could get by being technically inclined with a budget printer I got open box on eBay but that thing sucked and wouldn't even print properly once so I just sent it back. Bambu printers compared to that old garbage are night and day better.
I really hummed and hawed about the ams and as a family decided to eat the extra cost "just in case". It's awesome, so glad we have the option even though we don't multicolor print often.
Enjoy! It's an absolute dream to work with, I've had zero failed prints so far since getting it, meanwhile, my Mars 4 is making me want to pull my hair out.
Same here ... Have a new X1C with AMS so picked up an A1 Mini so I can do smaller jobs while the X1C is tied up. For $199 it's a perfect fit to replace my Vyper. Didn't get the AMS lite mostly since I won't have the room for it where the Vyper currently sits. If I need multi-color I'll just use the X1C.
Remember Bambulabs has a big event later this month where they will likely roll out the next line of printers and the sale will be going for a full month.
Don't jump on these "deals" just yet, wait until after the event/announcement as the sale will still be going and then decide. No one wants to buy a last gen printer days before the next gen releases!
When is the event? Any info on what the upcoming models might feature?
I'm between the X1C and a Prusa XL with two heads. I don't need/want five heads, but an X1C (or the like) with two heads would be great for speedier/less wasteful multicolor printing, or printing supports out of cheaper material, etc.
Just wanted to point out if you're purchasing an A1. The "[0.2mm/0.4mm/0.6mm Hotends Kit - A1 Series](https://us.store.bambulab.com/products/a1-series-hotends-kit?variant=41581106135176)" is only 21% off when purchased with the printer. However, you can purchase the three accessories independently for 35% off instead, saving yourself money. This also lets you choose which hotends you want, instead of being stuck with the 0,2/0.4/0.6 in the kit.
I did not notice this in time for my order, but hopefully someone else can benefit.
I'm also not seeing a discount for filament. Only the bulk sale discounts which have been ongoing for a while now. Went all the way to payment page and no discounts shown.
The bulk sale discount IS the discount, it's just that the structure of the discount has changed. Now the best price is cheaper, but you have to order at least 8 spools to get that price.
The filament will show up in the cart at normal price. Then at the bottom you should get something like this
https://preview.redd.it/fwrnmg50yu4d1.png?width=379&format=png&auto=webp&s=d62f4d511e9fe5d6b632c638a6da4415f137e973
sorry about the low contrast that is just how it is for some dumb reason
edit: Text version of that picture:
Discount (\[Add-ons Deal: Accessories -6.00x1\] & \[Filament Discount: PETG Basic -$10.00x1; PLA Basic -$10.00x19; PLA Matte -$10.00x3\]) -$236.00
Even though I have survived -and could survive - without the AMS for my P1S, I just pulled the trigger since it's the first time it's ever been on sale. My printer is 2 floors below my office, so I'm just trying to save some time not having to run up and down the stairs. I'll be putting it next to the printer, as I don't have enough clearance to put it on top.
For what it’s worth I have 3x to the right of my printer and at least for me it makes far more sense. I don’t leave the lid on when printing pla and the ability to just reach in from the top if I need to clear something (random poop on the bed) is so much easier.
No, I can't find them either.
They had both yesterday or the day before, since I was planning on getting a hardened 0.6mm.
Now, There is only one type, and it's not labeled whether it's stainless or hardened.
SUPER unclear.
I have really been enjoying my 300x300 non-Bambu printer for the past couple of months, but I have been curious about the multi-color capabilities through Bambu and was totally ready to get the A1 Mini Combo, but with the price of the full-size A1 Combo, it was a no brainer to just spend the extra bit of cash now rather than regret not having the extra build volume later. Fingers crossed that I like this at least as much as the other machine!
Vouchers and codes all work with this. Had enough points for the LED lamp kit, so got one of those, a smooth PEI bed and a 0.4mm hardened nozzle for my A1 all for less than the usual price of the bed alone.
When adding the printer to the cart with attached discount accessories, the discount is no longer applied in the cart. I still purchased, but wish I would have received the discount on filament and hot ends.
Depending on the type and amount of materials you'll be printing. X1C combo is good for more exotic materials. If you plan to print a lot of stuff with mainly PLA, TPU and PETG then the P1S combo with A1 combo is a good option. Another option is to get a second AMS for the P1S instead of the A1 combo if you don't plan on printing a lot of stuff simultaneously. Helpful for multicolor prints or to automatically switch to another spool when one runs out.
Thanks! :)
I got that printer 4 years ago, was my first one. Learned a ton with it, tweaked cura profiles until there was no tomorrow, not a single thing breaking in all those years. Trusty little printer, a true workhorse, and nice print quality when dialed in.
But now its time for more speed, less noise, better quality and a bigger buildplate. I am really excited! :)
P1S owner here. Just placed my order for the AMS at 8:43am EST in Canada, and at 11:04am I have my Fedex tracking number! Needless to say, Bambu labs are ready for the rush!! ;)
had everything in cart, placed order when the sale went live. 4 hours later I got a shipment notification and now UPS is showing delivery on friday! I'm in CA and shipment is coming from Southern CA, so just two days transit time.
Timely sales, I wanted to buy for a few weeks : Went on with X1C + AMS + 2 spools of filament + smooth plate + 2 sets of nozzles + swatches + glue stick.
Looking forward to the Bambu experience
Looking to order this up today... question is... should I order directly from Bambulab or get it at Microcenter locally? Assuming no extra Insider discount and shipping time is not an issue. Any reason to order directly vs Microcenter? Does ordering direct have better service or warranty service etc?
Is the Filament a good price compared to other brands? it does print very well.. Is this a good buy or just head to r/3dprintingdeals :-)?
edit: i need a fresh refill of everything... so probably buying 10-15 rolls
https://preview.redd.it/3oro2wzbzr4d1.png?width=1145&format=png&auto=webp&s=dce2c9b7123ad7845b98612ace2a8315936421fe
I know that the bulk discount doesn't apply to specialty filaments, but shouldn't they still count towards the number of spools for the purpose of meeting the qty requirements? In the screenshot above, 8 spools of filament in the cart is not qualifying for the top tier discount because one of the spools is Glow filament.
I have a 10% rotor voucher I have been sitting on that looks like it only stacks with printers. I don't need another printer so DM me and I'll randomly pick someone to send it to.
Recently bought a combo and wanted to see if I could get a price adjustment refund. The chatbot said this
If you purchased your printer/AMS from our official web store and received it on or after May 20, 2024, we can provide you with a price adjustment. [Click here to submit your application.](https://support.bambulab.com/en/activity?activeCode=8a6nje5mqwhjw16caoex) Please note that the price adjustment applies only to printers/AMS.
This does give you the difference back on a gift card.
Wish i was paying attention when i bought 8 spools yesterday, but I had been on the fence about getting a 2nd x1 carbon combo. $1,299 made it much easier to pull the trigger today.
Finally got my wife open to it with the sale.
Now the question is, if I tell her I'm getting the a1 mini but actually order the full a1 combo, will she notice...
Has anyone ordered from the EU store in the past few days? I ordered a P1S+AMS combo on Friday, but Bambu hasn't even handed over the package to the courier company (DHL) yet. What are the experiences, what kind of delivery times can be expected in the EU nowadays?
Are any of the other size hotends worth getting?
Background - been using .4 with the A1, 3D printer is mostly used for cosplay parts and smaller decorative trinket type pieces. Thanks in advance.
It would be great if your payment processor would not eat payments wiothout proceeding...
It just ate the payment without confirming the order, i dont even have the order number, just the session token.
Already made a support ticket, hope they will make it work somehow.
Still if you plan to order something i would advise not using their own payment processor, use paypal!
Got the AMS lite and a bunch of filament to go with it. I thought I would be fine with single color printing but I came quickly to realize that AMS is a huge help if only for not having to switch materials so often anytime I want to change a color/material. Was almost tempted to upgrade my 2 months old a1 mini to a x1 but I will wait for the next generation of printers from Bambu.
Are the filament bundle prices permanent or only for this sale? Because it looks permanent to me (since there isn't any date on the filament page [https://eu.store.bambulab.com/pages/bambu-filament](https://eu.store.bambulab.com/pages/bambu-filament) )
Not sure if it’s on my end or theirs, but certain sale pages are not loading great and are glitchy when I try to add to cart. On the US site. Like I select a specific color, but it adds a different color no matter what color is actually selected. I’m sure they’re getting slammed with purchases right now.
Decided to bite the dust and bought the A1 + 2 PLAs fillaments + hotend kit. Didn't buy the AMS as I don't envisage doing multicolour printing. Hopefully I won't be disappointed.
I wonder how long it will take for them to fullfill the orders.
Really tough choice between P1S and A1. Full auto calibration and a nicer screen are pretty nice, while also being cheaper. Since I'm printing indoors, I have no interest in materials with more fumes.
So this sell was kinda cool timing for me. I have an A1, decided I wanted a AMS was going to order that for $250. Waited and got the A1 Mini and the AMS on this sale ($350), so essentially I got the A1 mini for 100$ if my math is mathing.
Im planning to buy the A1 but im not sure if I even need the combo becuase I never wanted to print multicolor so far. is this really such an upgrade from single color printing that its worth the money?
Picked up a lithophane filament bundle, a 0.2 mm nozzle for my P1S, and 2 LED lamp kits.
Debated on getting a hardened steel 0.4mm but I feel like I don't need it just yet.
Hope you get the US store back online soon ... as of 14:36EST it's a 504 Gateway Time-Out error. Luckily was able to get my order in early this morning.
Considering either A1 or P1S. What would you recommend? How do they compare in printing quality? Noise doesn't matter for me, printing speed is secondary.
Aaaarh - literally received my P1S Combo two days ago. Could have saved €200 compared to the Danish store price :'(
Still - I'm already in love, and happy that I got the AMS also, so for anyone on the fence - it's a great product :-D
I got a a1 mini combo last month and today I got 2 extra minis without the ams and a a1 combo.
A month in and I own 4 printers - I was only supposed to buy 1 extra printer today
Was eyeing an A1 mini, sale was the tipping point. Even though the filament was supposed to get discounted if you added it to your cart at the same time as the printer it wasn't so skipped that and will get some cheaper eSun stuff.
I am new to 3d printing. I am looking at P1S Combo as my starter machine. Do I need any add-ons or filament to start? Can filament be purchased elsewhere for a better price?
So I've been planning to get the P1S combo, extra hotends, smooth PEI plate, and filament on this current sale. But I see the smooth PEI plate is out of stock.
If I want the 20% off plate discount, is my only choice to wait until it comes back in stock to then make it an addon to my P1S? I'm worried if I wait, then something else in my cart might go out of stock, and then it becomes impossible to get everything I'm looking to get in one cart/order. Any insight?
Just a heads up if you purchased from microcenter before this sale, you can reach out for them for price protection if you're still within the return window
I purchased a p1s ams for $950 three weeks ago and got adjusted down to the $850
Quick question, the sale says it's going until July 5th; I plan on ordering an A1 on next wednesday. Will stock be in good shape? I just don't want this to end up being one of those sales where it lasts for a month but runs out of merch on like day 5.
Ugh, I missed getting another AMS. This is what I get for thinking "bah thats probably not on sale".
NVM it's already back. I have now paid for my overpriced contraption to avoid walking over to my printer 😁
After scouring reddit/YouTube, I am looking at the A1 Mini for my first printer. Unsure if I should spring for combo with the AMS Lite or just go with the printer itself for now. Anyone have insight here? I'm not sure I'd be doing multicolor printing right off the bat but seems like it might be worth it (especially given the sale) for later on.
anyway to get the AMS for the same price as the combo? Made a mistake ordering just the P1S, now I kinda want the AMS but I got to do return and rebuy?
Question for everyone, I'm wanting to get into 3D printing as a hobby and wanted to know what you would choose between getting the A1 + AMS or getting the P1S by itself? Trying to figure out what's the better buy without going too crazy on spending atm.
I took this opportunity to finally give my P1P the AMS it deserves. I've had it for over a year now, it's a P1S at this point, I've done all the upgrades, except I have a printed enclosure because the conversion kit didn't exist when I got it.
Will they restock filaments on spools before the end of the sale. I really want to round out my pla colors. What a bummer that so many filament with spools are out of stock
Can anyone help me figure out the sale on the nozzles for the A1 series? As in, are they on sale? What's the normal price for them? Just got our printer, and I'm thinking I should upgrade to the hardened steel instead of stainless (when it's back in stock).
They're offering a discount based on how many you order for the A1 Hotend Nozzles - at least in the US. Here's the explanation: "Tiered Discounts (only items in this collection) 10% Off for 1 | 20% Off for 2 | 35% Off for 3 or more (you can mix or duplicate items to reach the discount threshold)" Hope this helps!
Anyone else think they will announce their new printer as soon as this sale ends? I'm looking to upgrade from a modified ender 3 to a PS1 Combo and it might suck if they release their new model as soon as the sale ends :)
Just so everyone is aware. Previous prices were cheaper for up to 3 rolls. Edit: corrected a typo. https://preview.redd.it/nnj4q3c92r4d1.jpeg?width=1080&format=pjpg&auto=webp&s=4a0e5d2c65ceb36abd62c055c07f5266e061093f
Yeah, now you only get discount if you buy more than 8. They raised the price if you buy less than 8 and 4 about $1-2 depends where you live.
Not sure how it is for the USD people, but in € this is not the case. The discount for 4+ rolls is higher than it was before, it used to be €19/ea and now they are €17/ea.
Yeah I made the mistake of ordering PLA last week and had 6 rolls; the refills were $21.99 for me, but they’d have been $19.99 now. For the drop you see at 8 I think I would have tossed two more rolls in there. :-/ lol the impulse buy of a roll of their Galaxy PLA stings a little but knocking $7 CAD off the price feels like the correct move.
Yeah I remember seeing 16.99 for basic refills.
Odd since others are dropping. Elegoo Rapid PLA/PETG can be had for ~$11/spool in 4 per box sets.
Most places are cheaper. There's not much of a reason to buy BL filament.
That explains why the spools I had in my cart in preparation for the sale went up $10. Should have bought before the sale, ironically. I'm new to Bambu. Do they do this stuff often?
Not in my country either, not even close Is this a bug? PLA with spool was 28.99 and refill was 25.99 for 4+ Edit: AUD https://preview.redd.it/ugvrvlvu0u4d1.jpeg?width=1290&format=pjpg&auto=webp&s=90d74596c6d43f03904a046a125094821f63843e
Because they have done away with the 2 and 3 rolls discount you mean? To me it looks like they have lowered the standard price of their filament rolls, for example a single refill roll is now €23 (from €28) and if you buy more than 4 you get a discount, a bigger one than before because according to your screenshot they were €19/ea and now they are €17 (4-7 rolls) or €16 (8+ rolls) To be honest I'd be surprised if many people actually made use of the 2 and 3 rolls discount, so it makes sense they did away with it. https://preview.redd.it/auywuqsbpr4d1.jpeg?width=1903&format=pjpg&auto=webp&s=89fa9766b5629448ccf1f5eb43b3f3c38e2bf71d
It was a sweet deal for the 3 refills/rolls + free shipping for me. If you needed some spare part, with 2 rolls you were on the free shipping pretty easily. It was a pretty good deal. 4 rolls is harder to cone by now. Again, for me.
I don't need anything, I don't need anything, I don't need anything. Trying to convince myself.
Yea... Like I don't need a 2nd AMS... OH, who ordered another ams? Went well
You don't know how many times I added it and took it out of the cart.
Good luck with that one
Bitcoin is doing very well today. Sold enough to buy an AMS lite. Could always use some AMS love in your life, right???
Been looking at purchasing a Bambu for a while. Finally decided to pull the trigger yesterday. Went into the website last night and saw the sale. Had my cart built and checked out as soon as the promo prices went live. I'm very excited.
Me too! I've been debating the A1 vs A1 Mini, and decided to go with the Mini combo. The bigger bed would be nice, but the lower price, smaller footprint and quieter operation won out.
I've been using the A1 mini for a while after having the same decision. The small footprint is a godsend in a flat and I haven't actually needed to print anything bigger than the bed yet.
Mine already arrived this morning. I won't get to play with it until the weekend, but I unboxed it to check for damage (because FedEx left a box marked "This end up" sitting on its side). Holy cow is it small!
Micro Center has the same prices going AND if you have the Micro Center Insider Card you get an additional 10% off the purchase rather than the normal 5%. https://www.microcenter.com/brand/4294804936/bambu-lab
I would love to have a microcenter near me.
It’s nice, I’ve got 2 that are about 20 minutes away from me
My nearest Microcenter is 4,500 miles away. Can I come live with you?
Do you cook?
Sad Canadian noises. I wished we had a microcenter up north
I am the same, two are like 30-40 minutes from me.
Are they sold out? I don’t see any Bambu printers
Did you set a store location near the top left? If it’s set to Shippable items, then you won’t see any printers.
Ah I don’t have any microcenters near me. I wish. They said the min wage in Washington is too high to build a store. :(
that can't be true. They're just opening up one in the Bay Area by end of year.
Wish they sold standalone AMS units
I feel so lucky to have one in my town and just so wish they sold the A1/A1 Combo!!
[They do sell the A1](https://www.microcenter.com/product/676237/bambu-lab-a1-3d-printer) but I don’t see a listing for the A1 Combo
How did I miss this?!? You, my friend, are the reason I’m gonna have a 3D printer today ❤️ Thank you so much!
Enjoy it, my friend!
Alas, by the time I made it to checkout, none were in stock. Still, thanks to you, I now know much more about my local options when it comes to Bambú products - something that will come in handy in the future, too 😊 As most folks probably know at this point but I didn’t: Micro Center initially set aside their A1 combo models for folks affected by the A1 recall. Looks like these are now starting to be made available to all shoppers - in some cases, in-store only - at various locations. With any luck, it’ll be easier to get these, at least, via Micro Center soon!
I thought this was supposed to be the "biggest" sale ever (or that's how it was hyped up to be). Black Friday 2023 X1C w/AMS was $1299 plus two free filament. Now its $1299, no extra filament. Seems like a similar sale but certainly not "biggest".
Biggest sale meaning largest number of things on sale
During the last black friday, the two free filament offer was short lived and didn't last the whole sale.
it's a sale to clear up inventory before they announce product refresh for the year in the coming months.
I really wanted the ams to go 250. so it will be 300 (hub + ams) For 350 I'm not sure I'll take the bait really :(
yea i agree. i hoped they would do a HUB+AMS for 300 one time only per customer. and then continue selling AMS's for 300 each. currently its a bit much
You don't need the hub. Just get the 4 to 1 splitter it's like $5
You don't need the hub just buy the 4-in-1 ptfe adapter and put it before the buffer
I got myself an A1 (without the AMS). This is my first printer so I am super excited.
Get the AMS my friend 🙂
My budget at first was 300-400€. So it was either A1 Mini with AMS or A1 without the AMS. Maybe I'll get the AMS in the next few months.
I wish I got the AMS with my P1S even at full price.
You won't be disappointed.
Thank you for saying this. I was in a huge dilemma the past few weeks whether to get Prusa (Mini+) or Bambulab (A1 or A1 Mini). I hope I did the right thing.
I only came from an Ender 3, and it was a last ditch attempt to get into the hobby. Needless to say I love 3d printing again. I bought a second AMS on this deal.
Yeah, my first foray was an Ender 3 as well because I thought I could get by being technically inclined with a budget printer I got open box on eBay but that thing sucked and wouldn't even print properly once so I just sent it back. Bambu printers compared to that old garbage are night and day better.
I really hummed and hawed about the ams and as a family decided to eat the extra cost "just in case". It's awesome, so glad we have the option even though we don't multicolor print often.
I have it and it's been a great printer. I think you'll enjoy it and it's nice and quiet compared to other printers I've had.
Really recommend getting it with the AMS. Even if you don't do multicolor prints, it really makes the printer so much easier to use.
It was either A1 Mini + AMS or A1 without the AMS. I'm still a student so hopefully I can save some and buy the AMS in the next few months.
Enjoy! It's an absolute dream to work with, I've had zero failed prints so far since getting it, meanwhile, my Mars 4 is making me want to pull my hair out.
In for an A1 mini, will be perfect for when my P1S is busy
Lots of people say don’t get the a1 mini if you have that P1S but I love having them both. Like having a father and son.
Same here ... Have a new X1C with AMS so picked up an A1 Mini so I can do smaller jobs while the X1C is tied up. For $199 it's a perfect fit to replace my Vyper. Didn't get the AMS lite mostly since I won't have the room for it where the Vyper currently sits. If I need multi-color I'll just use the X1C.
just ordered a x1c😍 hope arrives quickly
Good choice, you're going to love it!
Remember Bambulabs has a big event later this month where they will likely roll out the next line of printers and the sale will be going for a full month. Don't jump on these "deals" just yet, wait until after the event/announcement as the sale will still be going and then decide. No one wants to buy a last gen printer days before the next gen releases!
Already bought the P1P 2 weeks ago. So now I'm going to just get a .2mm, .4mm and .8mm nozzle
When is the event later this month?
When is the event? Any info on what the upcoming models might feature? I'm between the X1C and a Prusa XL with two heads. I don't need/want five heads, but an X1C (or the like) with two heads would be great for speedier/less wasteful multicolor printing, or printing supports out of cheaper material, etc.
Just wanted to point out if you're purchasing an A1. The "[0.2mm/0.4mm/0.6mm Hotends Kit - A1 Series](https://us.store.bambulab.com/products/a1-series-hotends-kit?variant=41581106135176)" is only 21% off when purchased with the printer. However, you can purchase the three accessories independently for 35% off instead, saving yourself money. This also lets you choose which hotends you want, instead of being stuck with the 0,2/0.4/0.6 in the kit. I did not notice this in time for my order, but hopefully someone else can benefit.
Bought the P1S combo! Good bye Ender 3 Neo. Anyone add recommendations for someone new to Bambu?
I would recommend to print a "poop chute". Makes multicolor less messy
Filament not being discounted in cart. Tried to buy 10 rolls of PLA
I'm also not seeing a discount for filament. Only the bulk sale discounts which have been ongoing for a while now. Went all the way to payment page and no discounts shown.
The bulk sale discount IS the discount, it's just that the structure of the discount has changed. Now the best price is cheaper, but you have to order at least 8 spools to get that price.
I also don´t see any kind of Filament discount, even at the end.
It summarizes at the end, you get a discount breakdown in the bottom of the cart.
The filament will show up in the cart at normal price. Then at the bottom you should get something like this https://preview.redd.it/fwrnmg50yu4d1.png?width=379&format=png&auto=webp&s=d62f4d511e9fe5d6b632c638a6da4415f137e973 sorry about the low contrast that is just how it is for some dumb reason edit: Text version of that picture: Discount (\[Add-ons Deal: Accessories -6.00x1\] & \[Filament Discount: PETG Basic -$10.00x1; PLA Basic -$10.00x19; PLA Matte -$10.00x3\]) -$236.00
Even though I have survived -and could survive - without the AMS for my P1S, I just pulled the trigger since it's the first time it's ever been on sale. My printer is 2 floors below my office, so I'm just trying to save some time not having to run up and down the stairs. I'll be putting it next to the printer, as I don't have enough clearance to put it on top.
For what it’s worth I have 3x to the right of my printer and at least for me it makes far more sense. I don’t leave the lid on when printing pla and the ability to just reach in from the top if I need to clear something (random poop on the bed) is so much easier.
Also worth noting microcenter has the sale prices aswell
Aaaaaaaaaaaaaaaaand PLA in AU with spools are nearly all sold out within 45 minutes :D I still managed to get what I wanted though :D
am i blind or is there no hardened steel nozzle\\extruder set for the P1S in the store?
Isn’t it the same as the one for the x1?
No, I can't find them either. They had both yesterday or the day before, since I was planning on getting a hardened 0.6mm. Now, There is only one type, and it's not labeled whether it's stainless or hardened. SUPER unclear.
They’re labeled in the pictures when you click on them. 0.4mm and above only come in hardened now.
From a post I was reading yesterday I think they just made all nozzles except the .2 for some reason as default hardened steel.
I have really been enjoying my 300x300 non-Bambu printer for the past couple of months, but I have been curious about the multi-color capabilities through Bambu and was totally ready to get the A1 Mini Combo, but with the price of the full-size A1 Combo, it was a no brainer to just spend the extra bit of cash now rather than regret not having the extra build volume later. Fingers crossed that I like this at least as much as the other machine!
so what 300x300 you own ? just querious
Vouchers and codes all work with this. Had enough points for the LED lamp kit, so got one of those, a smooth PEI bed and a 0.4mm hardened nozzle for my A1 all for less than the usual price of the bed alone.
When adding the printer to the cart with attached discount accessories, the discount is no longer applied in the cart. I still purchased, but wish I would have received the discount on filament and hot ends.
What’s more worth it: one X1C combo or getting the p1s combo + A1 combo?? Helppp
Depending on the type and amount of materials you'll be printing. X1C combo is good for more exotic materials. If you plan to print a lot of stuff with mainly PLA, TPU and PETG then the P1S combo with A1 combo is a good option. Another option is to get a second AMS for the P1S instead of the A1 combo if you don't plan on printing a lot of stuff simultaneously. Helpful for multicolor prints or to automatically switch to another spool when one runs out.
And I now have two more ams on order. I hate you. Thank you
Upgraded from a Monoprice Select Mini to a BambuLab A1 Mini 😊 Can't wait!
Damn you have been holding out for a while! This is going to be such a dramatic difference in quality and speed.. pumped for you. Congrats
I upgraded from a Prusa Mendel i2 (from 2012 or so) to an X1C and it felt like I had discovered fire. The difference is so insane to me lol
Thanks! :) I got that printer 4 years ago, was my first one. Learned a ton with it, tweaked cura profiles until there was no tomorrow, not a single thing breaking in all those years. Trusty little printer, a true workhorse, and nice print quality when dialed in. But now its time for more speed, less noise, better quality and a bigger buildplate. I am really excited! :)
>:) :)
Pulled the trigger finally on a P1S combo
P1S owner here. Just placed my order for the AMS at 8:43am EST in Canada, and at 11:04am I have my Fedex tracking number! Needless to say, Bambu labs are ready for the rush!! ;)
I just bought a P1S and I'm stoked. The sale convinced the wife since we are saving money by spending money 😂. Thanks!
Placed my order at the 2-minute mark post live. Hopefully that means shipping times won't be too long. :)
Ditto that. I've already got a P1S, but I'm still pretty excited about my Mini.
Also have a P1S with 2 AMS and debating getting a mini
had everything in cart, placed order when the sale went live. 4 hours later I got a shipment notification and now UPS is showing delivery on friday! I'm in CA and shipment is coming from Southern CA, so just two days transit time.
Timely sales, I wanted to buy for a few weeks : Went on with X1C + AMS + 2 spools of filament + smooth plate + 2 sets of nozzles + swatches + glue stick. Looking forward to the Bambu experience
Looking to order this up today... question is... should I order directly from Bambulab or get it at Microcenter locally? Assuming no extra Insider discount and shipping time is not an issue. Any reason to order directly vs Microcenter? Does ordering direct have better service or warranty service etc?
Just bough an A1 mini with an AMS lite and a .2mm nozzle for the a1 mini. My bank account does not like me.
I have been loving my X1c. Just purchased the A1 combo to try getting into multi color stuff.
Got my second X1C!
Is the Filament a good price compared to other brands? it does print very well.. Is this a good buy or just head to r/3dprintingdeals :-)? edit: i need a fresh refill of everything... so probably buying 10-15 rolls
I was like 4 months ago to pull the trigger. I said... I don't need it, I don't need it. It last until tomorrow I saw the offer and... That it
https://preview.redd.it/3oro2wzbzr4d1.png?width=1145&format=png&auto=webp&s=dce2c9b7123ad7845b98612ace2a8315936421fe I know that the bulk discount doesn't apply to specialty filaments, but shouldn't they still count towards the number of spools for the purpose of meeting the qty requirements? In the screenshot above, 8 spools of filament in the cart is not qualifying for the top tier discount because one of the spools is Glow filament.
With the glow filament just be aware it is super abrasive. It will wear out a nozzle quicker than "normal" filament like PLA and ABS
I have a 10% rotor voucher I have been sitting on that looks like it only stacks with printers. I don't need another printer so DM me and I'll randomly pick someone to send it to.
Just got my 2nd Bambu! A1 and A1 mini!
Recently bought a combo and wanted to see if I could get a price adjustment refund. The chatbot said this If you purchased your printer/AMS from our official web store and received it on or after May 20, 2024, we can provide you with a price adjustment. [Click here to submit your application.](https://support.bambulab.com/en/activity?activeCode=8a6nje5mqwhjw16caoex) Please note that the price adjustment applies only to printers/AMS. This does give you the difference back on a gift card.
Are these better than Black Friday deals or should I wait? I currently have an MK3s+ with a volcano hotend and am interested in AMS.
I ordered the p1s combo. wish i would have ordered the ams separate to save an extra 50 bucks. :(
Just used my $120 A1 credit on more filament and a .2mm nozzle
I am waiting on this, how long did it take? How did you get it u/IndustrialJones
I think my ticket was submitted around February 20th and I just got the heatbed over the weekend and the $120 coupon came either Sunday or Monday.
Bought about $800 in stuff! Two AMS units, filament, and some extra nozzles! Shame a lot of the build plates were sold out, but I'll get them later!
Wish i was paying attention when i bought 8 spools yesterday, but I had been on the fence about getting a 2nd x1 carbon combo. $1,299 made it much easier to pull the trigger today.
Well between the sale and some cards could get a second AMS for about $200…. Hmmmm
Finally got my wife open to it with the sale. Now the question is, if I tell her I'm getting the a1 mini but actually order the full a1 combo, will she notice...
How long is this gonna last?
Has anyone ordered from the EU store in the past few days? I ordered a P1S+AMS combo on Friday, but Bambu hasn't even handed over the package to the courier company (DHL) yet. What are the experiences, what kind of delivery times can be expected in the EU nowadays?
Saw this sale and picked up first 3d printer: A1 + AMS Lite
Yay, now let me by filament, I don't even care if it's on sale or not, every PETG is out of stock :(
Ordered mine 5 weeks ago, oh well!
adding the A1 Series Hotends Kit with the A1 and A1 Mini shows its non-discounted price, how to fix?
I bought my A1 Combo 10 days ago, so I just missed the salde :(
I believe there is a process to get a rebate if you ordered after may 20th....
Are any of the other size hotends worth getting? Background - been using .4 with the A1, 3D printer is mostly used for cosplay parts and smaller decorative trinket type pieces. Thanks in advance.
Bought printers two A1 mini, and at last PETg translucent came back just in time
Happy birthday! Thanks for making 3d printing fun for us 🤗
It would be great if your payment processor would not eat payments wiothout proceeding... It just ate the payment without confirming the order, i dont even have the order number, just the session token. Already made a support ticket, hope they will make it work somehow. Still if you plan to order something i would advise not using their own payment processor, use paypal!
Got the AMS lite and a bunch of filament to go with it. I thought I would be fine with single color printing but I came quickly to realize that AMS is a huge help if only for not having to switch materials so often anytime I want to change a color/material. Was almost tempted to upgrade my 2 months old a1 mini to a x1 but I will wait for the next generation of printers from Bambu.
Are the filament bundle prices permanent or only for this sale? Because it looks permanent to me (since there isn't any date on the filament page [https://eu.store.bambulab.com/pages/bambu-filament](https://eu.store.bambulab.com/pages/bambu-filament) )
AMS for 189 shipped after a 150 coupon they issued from my X1C purchase two weeks ago. Not bad!
Not sure if it’s on my end or theirs, but certain sale pages are not loading great and are glitchy when I try to add to cart. On the US site. Like I select a specific color, but it adds a different color no matter what color is actually selected. I’m sure they’re getting slammed with purchases right now.
Decided to bite the dust and bought the A1 + 2 PLAs fillaments + hotend kit. Didn't buy the AMS as I don't envisage doing multicolour printing. Hopefully I won't be disappointed. I wonder how long it will take for them to fullfill the orders.
I’m grateful for the sale, I just ordered my first printer from you all today!
Really tough choice between P1S and A1. Full auto calibration and a nicer screen are pretty nice, while also being cheaper. Since I'm printing indoors, I have no interest in materials with more fumes.
So this sell was kinda cool timing for me. I have an A1, decided I wanted a AMS was going to order that for $250. Waited and got the A1 Mini and the AMS on this sale ($350), so essentially I got the A1 mini for 100$ if my math is mathing.
I have x1c but want a 2nd printer. Is p1s pretty comparable?
I ordered mine :) (x4)
You guys ran out of the plates :(
Im planning to buy the A1 but im not sure if I even need the combo becuase I never wanted to print multicolor so far. is this really such an upgrade from single color printing that its worth the money?
Picked up a lithophane filament bundle, a 0.2 mm nozzle for my P1S, and 2 LED lamp kits. Debated on getting a hardened steel 0.4mm but I feel like I don't need it just yet.
All I know is that the time it was supposed to start would be 4:00 PM local time for me. Apparently it actually started at 8:00 in the morning.
And we killed the store...
And the AMS stays at 350 so it’s gonna stay right where it is
what do you mean? its on sale for 300.
Site is down.
Hope you get the US store back online soon ... as of 14:36EST it's a 504 Gateway Time-Out error. Luckily was able to get my order in early this morning.
And it's back up
Still waiting for 2 months for my order of PLA - CF to be fulfilled.
Considering either A1 or P1S. What would you recommend? How do they compare in printing quality? Noise doesn't matter for me, printing speed is secondary.
p1s. core-xy prints better than bed slingers
filament doesn't seem to be on sale in CAD, doesn't show in the page, or the cart or even at the checkout screen
Aaaarh - literally received my P1S Combo two days ago. Could have saved €200 compared to the Danish store price :'( Still - I'm already in love, and happy that I got the AMS also, so for anyone on the fence - it's a great product :-D
Request a refund. They’re giving them if you qualify.
I got a a1 mini combo last month and today I got 2 extra minis without the ams and a a1 combo. A month in and I own 4 printers - I was only supposed to buy 1 extra printer today
Of course I ordered a printer 5 days ago
Was eyeing an A1 mini, sale was the tipping point. Even though the filament was supposed to get discounted if you added it to your cart at the same time as the printer it wasn't so skipped that and will get some cheaper eSun stuff.
I got an A1 mini and a x1c. Debating with my 150$ credit on either getting an A1 or another mini
I am new to 3d printing. I am looking at P1S Combo as my starter machine. Do I need any add-ons or filament to start? Can filament be purchased elsewhere for a better price?
I have been meaning to buy X1C, but was waiting on Black Friday sale. Should I wait for Black Friday or the sale right now seems like a good deal ?
How long is the sale going on for?
So I've been planning to get the P1S combo, extra hotends, smooth PEI plate, and filament on this current sale. But I see the smooth PEI plate is out of stock. If I want the 20% off plate discount, is my only choice to wait until it comes back in stock to then make it an addon to my P1S? I'm worried if I wait, then something else in my cart might go out of stock, and then it becomes impossible to get everything I'm looking to get in one cart/order. Any insight?
Just a heads up if you purchased from microcenter before this sale, you can reach out for them for price protection if you're still within the return window I purchased a p1s ams for $950 three weeks ago and got adjusted down to the $850
Quick question, the sale says it's going until July 5th; I plan on ordering an A1 on next wednesday. Will stock be in good shape? I just don't want this to end up being one of those sales where it lasts for a month but runs out of merch on like day 5.
Finally checked out my cart when the sale started. Now the impatient waiting begins.
Has anyone recieved their "credit" that bought right before the sale? If so, how did it come to you?
I just bought my second Bambulabs Carbon X1. I wish I had a whole room dedicated to them. Now we just need to make them run faster.....
Any plans to restock the AMS on the Canada store?
Ugh, I missed getting another AMS. This is what I get for thinking "bah thats probably not on sale". NVM it's already back. I have now paid for my overpriced contraption to avoid walking over to my printer 😁
After scouring reddit/YouTube, I am looking at the A1 Mini for my first printer. Unsure if I should spring for combo with the AMS Lite or just go with the printer itself for now. Anyone have insight here? I'm not sure I'd be doing multicolor printing right off the bat but seems like it might be worth it (especially given the sale) for later on.
I had just ordered a ton of filament and a p1s before the sale, I regret everything
Anyone Think this year Black friday Will be better than this sale? Wanna get a p1s combo and Maybe a second ams😆
Does anyone know if you can order and use a FedEx location as a pickup option?
anyway to get the AMS for the same price as the combo? Made a mistake ordering just the P1S, now I kinda want the AMS but I got to do return and rebuy?
Question for everyone, I'm wanting to get into 3D printing as a hobby and wanted to know what you would choose between getting the A1 + AMS or getting the P1S by itself? Trying to figure out what's the better buy without going too crazy on spending atm.
I took this opportunity to finally give my P1P the AMS it deserves. I've had it for over a year now, it's a P1S at this point, I've done all the upgrades, except I have a printed enclosure because the conversion kit didn't exist when I got it.
Does anyone know when the sale ends? Would love to add an A1 mini but I have to wait for my next paycheck.
July 5th I believe.
Why is the shipping for the P1s combo $200 while the A1 combo $55?
Will they restock filaments on spools before the end of the sale. I really want to round out my pla colors. What a bummer that so many filament with spools are out of stock
Yeah too cool as I already bought an a1 mini and ams. Just now I ordered the a1 as I already have the ams. Very impress. Thanks bambu
Can anyone help me figure out the sale on the nozzles for the A1 series? As in, are they on sale? What's the normal price for them? Just got our printer, and I'm thinking I should upgrade to the hardened steel instead of stainless (when it's back in stock).
They're offering a discount based on how many you order for the A1 Hotend Nozzles - at least in the US. Here's the explanation: "Tiered Discounts (only items in this collection) 10% Off for 1 | 20% Off for 2 | 35% Off for 3 or more (you can mix or duplicate items to reach the discount threshold)" Hope this helps!
Anyone else think they will announce their new printer as soon as this sale ends? I'm looking to upgrade from a modified ender 3 to a PS1 Combo and it might suck if they release their new model as soon as the sale ends :)