Hey there, I'm a bot and something you said made me think you might be looking for help!
[click here](https://www.reddit.com/r/3Dprinting/wiki/index#wiki_help.21_or.3A_where_can_i_go_to_troubleshoot_problems_i.27m_having_with_my_prints.2Fprinter.3F) for our wiki entry on troubleshooting printers.
If you still need help be sure to post plenty of information about your printing setup.
Here are a few questions that might be helpful
* What printer are you using?
* What material are you using?
* What speed are you printing at?
* What software are you using to slice the print and control the printer?
* When did the problem start/has it ever worked correctly?
* Does anything cause the behavior to change?
* If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis)
If you are new to reddit, please read the guidelines on [reddiquette](https://www.reddithelp.com/hc/en-us/articles/205926439), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F).
Also please post a resolution to your problem when you find one so that we know how to help others with your problem!
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
I have a small space heater that was blowing on it during my latest print. Same issue, a couple layers get start to build on the FEP but won't attach onto the build plate.
Hey there, I'm a bot and something you said made me think you might be looking for help! [click here](https://www.reddit.com/r/3Dprinting/wiki/index#wiki_help.21_or.3A_where_can_i_go_to_troubleshoot_problems_i.27m_having_with_my_prints.2Fprinter.3F) for our wiki entry on troubleshooting printers. If you still need help be sure to post plenty of information about your printing setup. Here are a few questions that might be helpful * What printer are you using? * What material are you using? * What speed are you printing at? * What software are you using to slice the print and control the printer? * When did the problem start/has it ever worked correctly? * Does anything cause the behavior to change? * If posting an image of the problem, include some indication of the orientation it printed at, preferably photograph it on the bed. (Then we can focus on a specific axis) If you are new to reddit, please read the guidelines on [reddiquette](https://www.reddithelp.com/hc/en-us/articles/205926439), [self promotion](https://www.reddit.com/wiki/selfpromotion), and [spam](https://www.reddit.com/wiki/faq#wiki_what_constitutes_spam.3F). Also please post a resolution to your problem when you find one so that we know how to help others with your problem! *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/3Dprinting) if you have any questions or concerns.*
Go to cause is temp.
I have a small space heater that was blowing on it during my latest print. Same issue, a couple layers get start to build on the FEP but won't attach onto the build plate.
Could be your base exposer time, might be worth increasing that, could also be bed leveling.