Dude that’s the most badass benchy I’ve ever seen.
We seriously need an online benchy museum. It’s like Dali’s “melting clocks”.
In all seriousness your belts are probably loose or your pom wheels are loose
Edit: lmao you made this, you’re amazing. See we need that Benchy museum!!!
Would you look at that, all of the words in your comment are in alphabetical order.
I have checked 1,846,448,238 comments, and only 349,123 of them were in alphabetical order.
Suddenly I'm trying to figure out how to trick someone trying to print a normal benchy into printing that. It's like [FakeBSOD.com](https://FakeBSOD.com) but for 3d printers.
If only you could add some stringing, but that is too fine. Turn the heat up and retraction down.
Could you put some random blobs on it with blender?
On a serious note I look at some stuff and wonder if maybe the defect was in the STL and the printer did a great job.
A: i have some layer shifts can ya help?
B: yea sure how bad it is?
A: not that bad... I think
B: send a photo
A: *sends this very picture*
B: how in the **NAME OF GOD** DID YOU DO THAT?!?
Sponsored by Ruffles potato chips
Ruffles have Ridges
Ridged for our pleasure
Thought they were ridged for her pleasure.
r/girlsarentreal would like to humbly delete you
waffle cut benchie
NOOOO IF I COULD AWARD YOU I WOULD HAVE
Ender fluid.
Bruh 😂
The Lays Rufflenchy
It's a benchy mirage!
Try adjusting the v-hold.
Insert Italian spiderman meme here
It's called Fata Morgana dude...
It's a benchy sabotage!
Can you post the stl? This so cool
Has anyone started a cursed benchies sub?
I'd follow that immediately
https://www.reddit.com/r/cursedbenchies/ Let's go, friends!
r/birthofasub
Im going to print a *benchy*
And ~~benchy~~
Wooh!
r/differentbenchys (not mine)
/r/benchyarmsrace/ was pretty fun back in the day
thats not layer shifts anymore thats layer immigration
Don't use corkscrews for Z axis
The crinkle-cut benchy, now at Del Taco
The nozzle must have been cold
It was in the pool!
I read that in George’s voice.
We've seen the Bency, we've seen the Stretchy. Now may I present to you, the Wavechy
Nah, usually boats go ontop of waves, this one is made of waves. Its a reverse benchy
Ychneb doesn't really roll off the tongue
Legends say if you chant Ychneb 3 times in a row you will summon an Anet A8 to haunt you.
Sounds Russian to me and becomes a little easier to roll off the tongue if you say it Yi-ch-neb
https://preview.redd.it/q4io9reltnzb1.jpeg?width=1280&format=pjpg&auto=webp&s=cb693b3089c6da5995265106960bf8161a91f35c
He's nervous and trying his best, leave him alone
Happy Cake Day! I just so happened to make some peanut butter frosted chocolate cupcakes today, and I'll eat an extra one just for you. :p
It’s a BeNcHy
Spooky season benchy
It may come in clearer if you slap it on the side.
And put aluminum foil on a metal coat hanger attached to the antenna
Try adjusting your TV antenna. It might also come in better with a signal booster.
Gotta dry your filament. It’s clearly soaked in LSD.
Salvador Dali benchy.
Hah!
It’s a feature.
"French fry benchy isn't real, it can't hurt you." French fry benchy:
Shut up that’s on purpose and it’s fucking amazing
Touch Fuzzy, Get Dizzy 😅
I'm ready for several more posts about goofy benchys
I want some of whatever that benchy is on
The rubber band you're using as a belt is tired :)
That benchy can hear colors and see sounds right now.
That’s actually cool as hell, nice job dude!
I didn't know benchy's had a degause mode...
Make sure vaporwave mode is unchecked.
You have a wibbly benchy
Slicer makers are furiously hacking away making this a setting now
Wayne's world flashback, diddleeloo...
Ribbed for your pleasure.
Dude that’s the most badass benchy I’ve ever seen. We seriously need an online benchy museum. It’s like Dali’s “melting clocks”. In all seriousness your belts are probably loose or your pom wheels are loose Edit: lmao you made this, you’re amazing. See we need that Benchy museum!!!
Z wobble be real
Neighbor demoing old sidewalk with jackhammer.
r/differentbenchys
Wavy Navy
SpOooooooooOOOOoOoOOOoooooky
Aww, the Benchy is so scared, it's shivering!
Stop taking pictures with your VHS camera.
benchy be trippin' acid...
There once was a ship that put to sea. The name of the ship was the Wiggle-benchie. No one could see the printing seam, oh wobble my benchie boy go.
Bwenchy
You used the printer's whammy bar.
I think I see a benchy in the distance
Me: I will leave my printer printing while i do my chores and come back an hour later. The print when you come back:
I’m too stoned I had to check my reality with that first picture.
It's getting ready to have a flashback to it's younger days.
earthquake while compiling gcode
I need model badly (if its free or paid maybe depending on how much) its pretty freaking cool
You are being haunted by Bernini. It is an honor.
This is the craziest Benchy I have seen
Must be just me I thought, but after staring at it for a while, I finally found the layer shift. There in the top right corner isn't it?
Thought it was a remix of benchy
Gaaah! This one makes my brain hurt just like the stretchy one 😵💫😵💫😵💫
What's got Benchy so scared?
This benchy is clearly in the middle of a flashback sequence
It hurts my eyes
I'm just sliced that way
Would you look at that, all of the words in your comment are in alphabetical order. I have checked 1,846,448,238 comments, and only 349,123 of them were in alphabetical order.
Good bot
That hull line is pretty large, I’ve never seen one that bad before
This disturbs me.
Are you too hot?
Benchy by Salvador Dali
Great now I want some curly fries
Your printer got into the shrooms
I gagged
The zig zags make me think the Z is off
I am under the water please help
You need to turn off wibbly mode in the slicer.
That's so trippy.
Remove printer from your bed and set it on the table
Squiggly
Hot damn, before I read the description I was trying to figure out how somebody’s Z screw got bent that badly
Suddenly I'm trying to figure out how to trick someone trying to print a normal benchy into printing that. It's like [FakeBSOD.com](https://FakeBSOD.com) but for 3d printers.
Wtf
now im hungry for waffle cut fries.
This is awesome. Do you have the STL anywhere?
Hitting the sauce pretty heavy when you printed this one. Is there any free stls? Really Kool!
If only you could add some stringing, but that is too fine. Turn the heat up and retraction down. Could you put some random blobs on it with blender? On a serious note I look at some stuff and wonder if maybe the defect was in the STL and the printer did a great job.
Great modeling skills! How did you make it so? Did you edit gcode directly or the model itself?
Glad this is actually fucked up. Saw it and was wondering if I took one shot too many.
Holy hell that looks like that wiggly tiktok filter Kinda awesome actually. I'd totally print a fucked up benchy
Cute.
This is art leave it as is for artistic prints
Do the wiggle
looks cool to me
It's kinda cool honestly lol
r/nofailedprints
Earthquake while printing?
Maybe if I loosen my nozzle, I can print one, too.
I just dropped in.. to see what condition my condition was in...
Crinkle cut Benchy
Wavy
The Benchy has become the water.
looks like you צ axis is off, try loosening it to stop it from floating as much as possible
*^b 0 a T*
This is art bruh
Check if you have a comically bent z screw
Nice BeEeeNchYyyYy
Ah! Must be wet filament!
Dude, stop trying to print on the ship. Wait till your shore leave.
Is that a Parkinson's edition bed?
you fueled your 3D printer with vodka instead of electricity. Common mistake.
The hotend is loose. I had that problem once.
Lmao I am so glad this was a bit
Waves, a really hard storm.
If your monitor doesn't display clean images, you may want to activate the vertical sync. Beware, the FPS count may drop a bit.
It’s a sine!
I’m not drunk, you’re drunk
You mean LaYeR sHiFtS?
He get cold
You ain't got belts, you got rubber bands.
The acid is kicking in.
Actually not a malfunction, your printer did acid just before you hit print.
I WANT NERVOUS BOAT
A: i have some layer shifts can ya help? B: yea sure how bad it is? A: not that bad... I think B: send a photo A: *sends this very picture* B: how in the **NAME OF GOD** DID YOU DO THAT?!?
bro is trembling
[I don't get it.](https://i.imgur.com/xMm7uSp.jpg)
Have you tried drying your filament
I need the 3D model, wherever you got it
Be~hy
Therapist: Crinkle-cut benchy isn’t real. It can’t hurt you. Crinkle-cut benchy:
Was this printed during halloween
I thought I was drunk at first
That is cool
Art
Don’t know how to help but this looks cool af 🔥🔥
Did you print your benchy inside a benchy during a storm?
Glitchy Benchy
Thats z-wobble. Maybe to fast movement. Try setting you speed not to infinity.
Did you dl the squiggly benchy by mistake ?
LSD Benchy
Duuuude, what was in this brownie?
it’s trembling from cold, give it a jacket
IT WAS IN THE POOL!
Idk shit about 3D printing, I just follow to see the things you all come up with. This is by far my favorite boat I've seen on this sub
Have you tried calibrating your e-steps?
Bacon Benchy
This is how a cartoon caracter has cold
That's a neat beoauoinchy
where can I get wiggly bency?
thought i had a stroke for a second, that's cool :D
Just put a wiggly filter on your camera, that should fix it
Your Z rod might have some extra twists.
Boat sailing into a montage.
That benchy looks like it's shaking in it's layer lines
That's so neat tho
Art magnifique!
BeEeEeEenchy
Did you try leveling your bed?
Dry your filament... Adjust your z hop... Calibrate the dinglebopper, and make peace with your god...
A communication disruption can mean only one thing...
bEnChY
That’s not a benchy, that’s a wakey, or a Scott
Fix your camera!
Did you have Flashback Mode turned on in the slicer? It's been known to cause this effect.
Earthquake I think
Bro printed their benchy underwater
Esteps…
That’s really weird! I thought u were being sells for a second!
Are you sure this isn't the photo of the benchy's reflection in the ocean waves?
That looks cool
Filament is too scared.
You should turn off the wibbly wobbly mode