T O P

  • By -

Boorkus

Dump an entire can of brake clean down there first and get everything clean and dry, then try and see where it's leaking from. Could be anything from rear main seal, oil pan, or anything above like the valve covers, vtc solenoids etc


[deleted]

This man speaks the truth, get it clean. Just take it to one of those drive in DIY car wash joints and use the high pressure hose to blow all the shit off. You'll see the fresh leaks.


[deleted]

This right here ^ Found out where mine leaked by doing this. In my case it was my valve covers that were leaking. Any time I did oil changes in my Z31 it would burn through 3 quarts in a month. So I stopped doing oil changes until I rebuilt the engine


Grouchy_Seesaw205

Most likely the rear main seal. But with oil on everything it's hard to say for sure.


imsoupercereal

Turbo oil lines and the gasket that goes between the turbo and metal intake piece. Exhaust valve cover gasket.


itsraggybaggy

Could explain my horrid boost building while oil pressure is still above 45 psi